Manual

Manual | EN

Beckhoff Device Manager

2024-07-12 | Version: 4.9

Table of contents

Beckhoff Device Manager 3Version: 4.9

Table of contents

1 Notes on the documentation....................................................................................................................5

2 Security ......................................................................................................................................................6

3 Overview ..................................................................................................................................................10

4 System requirements..............................................................................................................................11

5 Web interface...........................................................................................................................................12

6 Information model...................................................................................................................................14

6.1 Areas...............................................................................................................................................17

6.1.1 0x1000-0x1FFF – General Area ...................................................................................... 17

6.1.2 0x8000-0x8FFF – Configuration Area.............................................................................. 18

6.1.3 0xB000-0xBFFF – ServiceTransfer Area ......................................................................... 64

6.1.4 0xF000-0xFFFF – Device Area........................................................................................ 65

7 API / samples...........................................................................................................................................67

7.1 PLC .................................................................................................................................................67

7.2 OPC UA ..........................................................................................................................................68

7.3 C#....................................................................................................................................................71

7.3.1 Querying CPU data ..........................................................................................................74

7.4 C++ .................................................................................................................................................76

7.5 ADS.................................................................................................................................................78

8 Appendix..................................................................................................................................................80

8.1 Initial help in case of problems........................................................................................................80

8.2 Data Types Overview......................................................................................................................81

8.3 Overview of error codes ..................................................................................................................81

8.4 ADS Return Codes..........................................................................................................................84

8.5 Win32 Error Codes..........................................................................................................................88

8.6 FreeBSD error codes ....................................................................................................................143

8.7 FreeRTOS error codes..................................................................................................................146

8.8 Support and Service......................................................................................................................148

Table of contents

Beckhoff Device Manager4 Version: 4.9

Notes on the documentation

Beckhoff Device Manager 5Version: 4.9

1 Notes on the documentation

This description is intended exclusively for trained specialists in control and automation technology who are

familiar with the applicable national standards.

For installation and commissioning of the components, it is absolutely necessary to observe the

documentation and the following notes and explanations.

The qualified personnel is obliged to always use the currently valid documentation.

The responsible staff must ensure that the application or use of the products described satisfies all

requirements for safety, including all the relevant laws, regulations, guidelines, and standards.

Disclaimer

The documentation has been prepared with care. The products described are, however, constantly under

development.

We reserve the right to revise and change the documentation at any time and without notice.

No claims to modify products that have already been supplied may be made on the basis of the data,

diagrams, and descriptions in this documentation.

Trademarks

Beckhoff

, TwinCAT

, TwinCAT/BSD

, TC/BSD

, EtherCAT

, EtherCAT G

, EtherCAT G10

, EtherCAT P

Safety over EtherCAT

, TwinSAFE

, XFC

, XTS

and XPlanar

are registered and licensed trademarks of

Beckhoff Automation GmbH.

If third parties make use of designations or trademarks used in this publication for their own purposes, this

could infringe upon the rights of the owners of the said designations.

Patents

The EtherCAT Technology is covered, including but not limited to the following patent applications and

patents:

EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702

and similar applications and registrations in several other countries.

EtherCAT

is registered trademark and patented technology, licensed by Beckhoff Automation GmbH,

Germany

The distribution and reproduction of this document as well as the use and communication of its contents

without express authorization are prohibited.

model, or design are registered.

Security

Beckhoff Device Manager6 Version: 4.9

2 Security

The Security chapter provides information on how to reduce the risk of unauthorized access.

Signal panels like the one shown below highlight additional information throughout the documentation:

Tip or pointer

This symbol indicates information that contributes to better understanding.

Intended use

The Beckhoff Device Manager is used for Beckhoff IPC diagnostics. It enables monitoring of system values,

which helps to prevent device downtimes. Since a customized BIOS is required for using the Beckhoff

Device Manager, the Device Manager is only available for Beckhoff Industrial PCs and Embedded PCs.

The intuitive Device Manager website facilitates system configuration. The website is protected by a

password, and access is encrypted (https). A standard administrator password specified by Beckhoff is

applied on delivery. You should change this password to prevent unauthorized remote access to the system.

Information on setting secure passwords is provided below.

Fundamental safety instructions

As a rule, it is important to prevent unauthorized persons from accessing the system. Various security

measures are available for this purpose.

• Secure access to the system by means of certificates (e.g. ssh or OPC UA). Note that this only secures

this type of access. If you want to prevent unauthorized access to the website, close TCP port 443

(https) in the system firewall. Please refer to the documentation for your operating system.

• Protect the system physically by keeping control cabinets locked and allowing access only to

administrators and technicians. This reduces attacks on the system via data carriers.

• Train employees in the general handling of passwords and data carriers.

For more information, refer to the IPC security documentation.

Binding server certificate

If you already have a server certificate you want to use you have to follow the following steps to bind the

certificate:

1. Rightclick on the Computer button in the Windows Startmenu and press Manage to open the "Computer

Management" window.

2. Mark the website node in the Internet Information Services Manager navigation which contains the virtual

directory for the TcAdsWebService and click on the Bindings… menu point in the appropriate Actions

pane.

Security

Beckhoff Device Manager 7Version: 4.9

3. Press Add to open the "Add Site Binding" dialog.

4. In the "Add Site Binding" dialog, choose the following values (see figure below) to create a binding for the

https protocol.

ð A binding for the https protocol is now available in the "Site Bindings" dialog.

Security

Beckhoff Device Manager8 Version: 4.9

You can now connect to all virtual directories of your website over the http and the https protocol.

Follow the next steps, if you want to allow connection over the https protocol only:

1. Navigate to the TcAdsWebService virutal directory and open the "SSL/TLS Settings" window.

2. In the "SSL Settings" dialog check the Require SSL checkbox.

ð The Internet Information Services will now only allow connections over the https protocol.

Secure passwords

Strong passwords are an important prerequisite for a secure system.

Please note the following points when assigning new passwords:

• Passwords should be unique for each user and service.

• Only change passwords after an incident in which passwords have become known without

authorization.

• Train the device users in the use of passwords.

A secure password has the following characteristics:

• Password complexity: The password should contain capital and lower-case letters, numbers,

punctuation marks and special characters.

• Password length: The password should be at least 10 characters long.

You can generate the password in different ways. An example is shown in the following table:

Table1: Password generation

Procedure Example

Start with one or two sentences. Complex passwords are more secure

Remove the spaces. Complexpasswordsaremoresecure

Abbreviate words or add spelling mistakes. Complxpasswordsarmorescure

Insert numbers and special characters to extend the

password.

KomlxPasswörtersinsicerer#529954#

Security

Beckhoff Device Manager 9Version: 4.9

The following passwords are not secure:

• Words from a dictionary

• Words written backwards, common spelling mistakes, and abbreviations

• Repetitive sequences, e.g. 123456789 or abcdefgh

• Personal information, e.g. birthdays, ID numbers, telephone numbers

Overview

Beckhoff Device Manager10 Version: 4.9

3 Overview

The Beckhoff Device Manager can be used for device diagnostics. It can provide a variety of system values.

They can be accessed via standard functions of the Windows operating system and via special functions of

the Beckhoff BIOS. The functions available for individual IPCs depend on the hardware, the BIOS, the

operating system, and the Device Manager version. They may therefore differ between different Beckhoff

IPCs.

In view of the fact that the control computer is the central element of the machine control system, any failure

can cause high downtime costs. It is therefore essential to be able to check the device. To prevent failure

and minimize downtime, it is important to detect critical conditions early on. Theseinclude impending heat

collapse due to failure of a fan or insufficient passive cooling. For the acquisition, analysis, and evaluation of

system data during operation, all newer Beckhoff IPCs therefore offer the option of sophisticated system

diagnostics with standardized, safe access to existing hardware and software components.

The Beckhoff Device Manager is only available for Beckhoff Industrial PCs and Embedded PCs, since it

requires a customized BIOS. The current version of the Device Manager is available from Beckhoff support.

On Beckhoff IPCs that are delivered with an embedded operating system, the Device Manager is pre-

installed as standard (IPCs with standard Windows OS are available on request).

Communication and programming interfaces

The Beckhoff Device Manager supports local system access (in the control program on the device) and

remote access from another IPC (or PLC).

The Device Manager functions can be integrated in user applications (particularly TwinCAT) via different

communication and programming interfaces.

https

Device

Manager

Website

https

(user mode)

Fig.1: Communication and programming interfaces

System requirements

Beckhoff Device Manager 11Version: 4.9

4 System requirements

Current components

The Beckhoff Device Manager is constantly being updated and further developed. Always use the

latest components in your application:

• BIOS

• Image for your Beckhoff IPC

• Beckhoff Automation Device Driver

• Tc3_IPCDiag for your TwinCAT PLC program

Hardware requirements

• The Beckhoff Device Manager only runs on Beckhoff IPCs or Beckhoff Embedded PCs. It does not run

on other IPCs/PCs.

• A prerequisite is the use of a Beckhoff image, as this contains special settings for using the Beckhoff

Device Manager.

• The Device Manager is included in all current Beckhoff standard images under Windows Embedded

(Standard and Compact).

Software requirements

• The current version of the Device Manager contains optimizations and improvements compared to

previous versions. The current version of the Device Manager is available from Beckhoff Service.

• The Device Manager is usually not pre-installed on Beckhoff images with Windows desktop versions

(Windows 7 Professional etc.). In this case you can install the Beckhoff Device Manager via a setup

program. The Setup facility is only available for “big” Windows systems, not for Windows CE or

Windows Embedded Compact. Windows CE systems cannot be updated. In this case always use the

latest image.

• Non-Beckhoff images are not supported.

BIOS version

There may be further conditions for the Beckhoff Device Manager version and the BIOS version, depending

on which features you want to use and which Industrial PCs or Embedded PCs you use.

Whether special features, such as reading of the CPU or mainboard temperature, are available in the Device

Manager depends on the BIOS version in the device used, since the device must make the corresponding

values available via a dedicated interface (BIOS API).

The following table shows the systems for which Device Manager values can not be read via the BIOS API.

IPC Mainboard Server embedded PC

• CBxx50

• CBxx51

• CB3x10

• C6670 • CX10x0

• CX80x0

• CX90xx

Beckhoff Industrial PCs of the same series may be equipped with different Beckhoff IPC mainboards,

depending on the performance class. An exception are Embedded PCs of the CX series. The functions

available for the Beckhoff Device Manager therefore depend on the integrated mainboard, not the IPC type.

Check whether additional information on the availability of individual features is provided in the description of

the modules you require.

When using the Device Manager via a PLC library, note the system requirements of the PLC library.

Web interface

Beckhoff Device Manager12 Version: 4.9

5 Web interface

For a quick overview of the functions supported by your Beckhoff IPC, please refer to Device Manager web

page. This is particularly helpful for functions that require a special Beckhoff BIOS (e.g. mainboard data).

All IPC diagnostic parameters of the Beckhoff IPC can be read out via the web interface using a standard

web browser. The web interface is available for download via a URL with the following structure: http://

<Device IP>/config

Important notes:

• Local access (without network connection) to the device web page is also available via the URL http://

localhost/config.

• Your network firewall must permit access via port 443 (https) for the web interface of the IPC.

• Instead of the IP address of the device, in principle you can use the device name of the IPC. However,

depending on the structure/configuration of your network (proxy server, etc.), the system may not be

able to resolve the device name. We therefore recommend using the IP address of the IPC.

Self-signed certificates for https connection

Since the devices use self-signed certificates for the https connection, current browsers will issue a

warning message that the identity cannot be verified. In this case, you can import the self-signed

certificate of the device (server) into the client Windows computer.

Before you can import the self-signed certificate to the client Windows computer, you must copy it from the

Industrial PC to the client Windows computer. For 64-bit systems the certificates can be found in the

directory C:\Program Files (x86)\Beckhoff\IPC-Diagnostics\Certs, for 32-bit systems in the directory C:

\Program Files\Beckhoff\IPC-Diagnostics\Certs.

Now import the self-signed certificate to the client Windows computer as follows:

1. Start certmgr.msc on the Windows computer.

2. Add the certificate snap-in for the computer account and manage the certificates for the local computer.

3. Import the self-signed certificate into Trusted Root Certification Authorities > Certificates.

Update certificate

If you want to install a new image on a device, the certificate on the client Windows computer must

also be updated.

By default, the access data are predefined when the IPCs are delivered:

• User name: Administrator

• Password: 1

The Security Wizard of the Device Manager prompts you to change these access data after the first start.

Please follow this instruction to prevent unauthorized access. For more information on selecting strong

passwords, see chapter 2 Security [}6].

After you have changed and confirmed the access data, the home page of the current web interface of the

Beckhoff Device Manager appears:

Web interface

Beckhoff Device Manager 13Version: 4.9

Fig.2: Beckhoff Device Manager home page

The home page provides a basic overview of the device. From here you can directly access the hardware,

software, and security sections. This allows you to check the hardware and software in a targeted manner.

From the home page, navigate further in the menu to configure the Industrial PC or Embedded PC. Note that

modifications only become active once they have been confirmed. Restart the PC if necessary.

Previous version of the web interface

The web interface of the Beckhoff Device Manager shown above was introduced at the end of 2015, so that

all new images will contain this interface from the time of its introduction. All images from the time before the

end of 2015 contain the old interface. The following image shows the home page and the Software menu

item, with reference to the MDP interface version (as an indicator of up-to-dateness) of the old web interface.

Fig.3: IPC diagnostics, old web interface

Information model

Beckhoff Device Manager14 Version: 4.9

6 Information model

Modules – categorization of hardware and software information

The Beckhoff Device Manager categorizes various hardware and software data in an information model via

modules.

• A module categorizes several pieces of hardware and software information in logical groups, e.g.CPU,

mainboard, TwinCAT.

• The Device Manager automatically generates modules on system startup based on the actual IPC

hardware and software. Modules therefore do not have a static address but a dynamic address, which

is generated when the Device Manager is started, based on the identified hardware and software of the

IPC.

• A module contains several tables that subdivide the hardware and software information for respective

modules into logical subgroups. Each module contains at least one "Header" table containing general

information on the module, plus at least one data table.

• A particular entry in the table is addressed via its subindex.

The following information is required to read specific data via the Device Manager:

• The (dynamic) address of the table containing the required information. A table can be addressed via a

unique address.

• The SubIndex within the table representing the desired information (e.g. CPUtemperature).

For PLC programming convenient function blocks are available, which facilitate access to the required data

(see samples for PLC programming [}67]). The following information on addressing can therefore be

skipped for PLC programming.

Finding the address of a table

To read a particular piece of hardware or software information via the Device Manager it is necessary to

determine its precise position in the information model, based on the index of the surrounding table and its

subindex.

Index:

The index of the table consists of 16bits and is configured as follows:

0x a nn x

Hex preamble Area code (4 bits) Module ID (8 bits) Table ID (4 bits)

Area code (4 bits): describes which area [}17] this address should address.

Module ID (8 bits): clearly identifies the dynamic position of the respective module and is automatically

generated by the Device Manager at system startup. It can be determined by querying the table 0xF020

(Device Area).

Information model

Beckhoff Device Manager 15Version: 4.9

Table ID (4 bits): identifies the table within a module.

Depending on the area used, the module ID and the table ID may be consolidated, e.g. for the Device Area,

which does not have any modules.

SubIndex:

The subindex for a required piece of information can be found in the list of available modules (Configuration

Area).

Information model

Beckhoff Device Manager16 Version: 4.9

Example

In this example the NIC module is to be addressed for reading the IP address of the network card (NIC).

Remember: Device Manager modules are generated automatically based on the actually available hardware

and software. In table 0xF020 [}65] of the Device Area a list of all automatically generated modules can be

queried. Each row in this table represents a module, consisting of the respective module type in the high

word and the dynamically created module ID in the low word. The content of table 0xF020 may look as

follows, for example:

SubIndex Value

High/Low Word prefix

Description

0 5 Number of entries in this table

1 0x 000C 0000 Module "Memory"

2 0x 000B 0001 Module "CPU" (core 1)

3 0x 000B 0002 Module "CPU" (core 2)

4 0x 0002 0003 Module "NIC"

The value returned to SubIndex 4 consists of the searched module type "NIC" (0x0002) in the high word and

the dynamic module ID (0x0003) in the low word. Since the list is sorted based on the dynamic module IDs,

the dynamic module ID always corresponds to the subindex minus one.

The complete index is now configured as follows, based on the scheme mentioned above:

0x a nn x

0x 8 03 1

Area code (in this case:

Configuration Area)

Module ID (results from

the table 0xF020)

Table ID (1 = NIC

properties)

The properties of the network card are therefore stored at address 0x8031. According to the specification of

the NIC module [}20], the IP address of the network card can now be read under address 0x8031 at its

subindex 2. The return value corresponds to one of the defined data types [}81].

Information model

Beckhoff Device Manager 17Version: 4.9

6.1 Areas

For addressing a table it is important to specify which area is to be addressed, since the Beckhoff Device

Manager is subdivided into different areas:

Area code Name Meaning

0x1 General Area The General Area contains various general data of the IPC.

0x8 Configuration Area This is where the individual modules and associated information are

created.

0xB Service Transfer

Area

The Service Transfer Area offers functional access.

0xF Device Area This is where the IPC diagnostics enters information to indicate which

modules are automatically detected on startup, depending on the

hardware and software, for example. In contrast to the Configuration

Area, the Device Area does not consist of subordinate modules, only of

individual tables.

When addressing a table, the first 4 bits represent the area (see also Description of the information model

[}14]).

6.1.1 0x1000-0x1FFF – General Area

The General Area contains various general data of the IPC.

0x1000

SubIndex Typ Name Typ Zugriff

00 VAR Device Typ (MDP

ProfileID(0x1389) &

SubProfileID(0x271

0))

DWORD32 read-only

0x1008

SubIndex Type Name Type Access

00 VAR Device Name VISIBLE STRING read-write

If the device name is invalid, the write command terminates with the value 0xECA60106 (invalid data [}81]).

Valid file names must meet the following requirements:

• Compliant with the RFC952/1123 standard

• The following prefixes are reserved by Beckhoff and must not be included:

◦ CX- or CX_

◦ CP- or CP_

◦ EK-

◦ AX-

0x1009

SubIndex Typ Name Typ Zugriff

00 VAR Hardware Version VISIBLE STRING constant

0x100A

SubIndex Typ Name Typ Zugriff

00 VAR OS and Image

Version

VISIBLE STRING constant

Information model

Beckhoff Device Manager18 Version: 4.9

0x1018 - Identity Object

SubIndex Typ Name Typ Zugriff

00 VAR Len UNSIGNED16 read-only

01 VAR Vendor UNSIGNED32 constant

02 VAR Product Code (not

yet supported)

UNSIGNED32 constant

03 VAR Revision Number

(not yet supported)

UNSIGNED32 constant

04 VAR Serial Number

(obsolete)

UNSIGNED32 constant

This parameter is obsolete. The parameter is no longer supported on newer Beckhoff IPC devices. Use the

parameter Serial Number (0xF9F0) from the MDP Device Area [}65].

6.1.2 0x8000-0x8FFF – Configuration Area

The Configuration Area enables read and write accesses to configuration data in the existing MDP modules.

The following module list shows the available modules. It also indicates on which operating system the

respective modules are not available. The corresponding data are shown as elements of tables. Each table

has a unique MDP index (see information model [}14]).

Note: If a component – e.g. an EtherCAT port or a hard disk – is present several times on the system, a

separate module instance is created for each one.

Information model

Beckhoff Device Manager 19Version: 4.9

Overview of the module types according to type numbers

Module Typenumber Operating system (module not

available)

NIC [}20]

0x0002

Time [}21]

0x0003

User Management [}23]

0x0004

RAS [}25]

0x0005 TwinCAT/BSD

FTP 0x0006 TwinCAT/BSD

SMB [}26]

0x0007

TwinCAT [}28]

0x0008

Software [}30]

0x000A

CPU [}31]

0x000B

Memory [}31]

0x000C

Firewall WinCE [}32]

0x000E

File System Object [}36]

0x0010

Display Device [}39]

0x0013

EWF [}40]

0x0014 TwinCAT/BSD

FBWF [}42]

0x0015 TwinCAT/BSD

OS [}45]

0x0018

RAID [}45]

0x0019

Fan [}48]

0x001B

Mainboard [}48]

0x001C

Disk Management [}50]

0x001D

UPS [}52]

0x001E

Physical Drive (S.M.A.R.T) [}55]

0x001F Windows CE/Windows Embedded

Compact

TwinCAT/BSD

Mass Storage Monitoring [}57]

0x0020 Windows CE/Windows Embedded

Compact

Unified Write Filter (UWF) [}60]

0x0021 Windows CE/Windows Embedded

Compact

TwinCAT/BSD

IO [}62]

0x0022

Misc [}63]

0x0100

The individual modules are explained in the following sections. Each module may contain access options for

different MDP areas.

Information model

Beckhoff Device Manager20 Version: 4.9

6.1.2.1 0x0002 - NIC

0x8nn0 - Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0002 00nn UNSIGNED32 read-only

02 VAR Type NIC VISIBLE

STRING

read-only

03 VAR Name Adapter Name VISIBLE

STRING

read-only

04 VAR Dev type 0x0002 2710 UNSIGNED32 read-only

0x8nn1 – NIC properties

If this component exists more than once on the system, a separate module instance is created for

each one.

Changing these settings requires an active network connection for the selected Ethernet/EtherCAT

adapter. Without an active network connection no parameters can be (pre-)set.

SubIndex Type Name Requirements Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR MAC Address VISIBLE

STRING

constant

02 VAR IPv4 Address

VISIBLE

STRING

read-write

03 VAR IPv4 Subnet Mask

VISIBLE

STRING

read-write

04 VAR DHCP BOOLEAN read-write

05 VAR IPv4 Default Gateway

1,2

VISIBLE

STRING

read-write

06 VAR IPv4 DNS Servers not for WinCE VISIBLE

STRING

read-write

07 VAR Virtual Device Name only for Windows VISIBLE

STRING

read-write

08 VAR IPv4 DNS Servers Active only for TC/BSD

and TC/RTOS

VISIBLE

STRING

read

This is the current active value.

With WinCE a reboot may be required in order to obtain a correct value. Withouta reboot WinCE may still

supply the previous value!

WinCE: depending on the DHCP status, a "Read" operation has the return value "DefaultGateway" or

"DhcpDefaultGateway".

0xBnn0 – IP Release/Renew Address (Service Transfer Object)

InputData

Type Name

UNSIGNED8 DummyByte

Information model

Beckhoff Device Manager 21Version: 4.9

0xBnn1 – Set IP, Subnet and Default Gateway

InputData

Type Name

UNSIGNED32 cbInputData

UNSIGNED32 IpLen

UNSIGNED32 SubnetLen

UNSIGNED32 GatewayLen

char[IpLen] szIP

char[SubnetLen] szSubnet

char[GatewayLen] szGateway

Count of bytes of all input data including cbInputData (size of all values of table InputData)

6.1.2.2 0x0003 - Time

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0003 00nn UNSIGNED32 read-only

02 VAR Type Time VISIBLE

STRING

read-only

03 VAR Name Time VISIBLE

STRING

read-only

04 VAR Dev type 0x0003 2710 UNSIGNED32 read-only

Information model

Beckhoff Device Manager22 Version: 4.9

0x8nn1

SubIndex Type Name Requirements Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR SNTP Server

• Name or IP Address of

the timeserver

• "NoSync" = No

synchronization

• "NT5DS" = Use domain

hierarchy settings (Win32

only – no WinCE)

• May contain the following

flags: See "NtpServer"

msdn (Win32 only – no

WinCE)

VISIBLE

STRING

read-write

02 VAR SNTP Refresh

in Seconds

On WindowsCE lowest

allowed value is 5 Seconds.

UNSIGNED32 read-write

03 VAR Seconds since midnight

January 1, 1970 (local time)

UNSIGNED32 read-write

04 VAR Textual DateTime

presentation (local time)

(ISO 8601) YYYY-MM-

DDThh:mm:ss.sTZD

VISIBLE

STRING

read-write

05 VAR Timezone - Zero based

index of currently active

timezone as listed in object

0x8nn2.Sub indizes in Oject

0x8nn2 are one based. To

lookup timezone information

you need to query sub idx

@ "this value"+1

not for TC/RTOS UNSIGNED16 read-write

06 VAR Time Offset – offset in

seconds of the current local

time relative to the

coordinated universal time

(UTC)

(supports only steps of 15

minutes = 900 seconds)

only for TC/

RTOS

SIGNED32 read-write

SNTP Server and SNTP Refresh: the system must be rebooted in order for the changes to take effect.

0x8nn2 - Timezones

SubIndex Type Name Requirements Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Timezone (1 .. Len) not for TC/RTOS VISIBLE

STRING

read-only

0x8nn3 – Timezones2

SubIndex Type Name Requirements Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Timezone (1 .. Len) not for TC/RTOS VISIBLE

STRING

read-only

Information model

Beckhoff Device Manager 23Version: 4.9

6.1.2.3 0x0004 - User Management

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0004 00nn UNSIGNED32 read-only

02 VAR Type User

Management

VISIBLE

STRING

read-only

03 VAR Name User

Management

VISIBLE

STRING

read-only

04 VAR Dev type 0x0004 2710 UNSIGNED32 read-only

0x8nn1 – User Name

List of the local users (excluding domain users)

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR name1 .. Len VISIBLE STRING read-only

0x8nn2 – Domain

List of domain names for the users from table 0x8nn1

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR name1 .. Len VISIBLE STRING read-only

0x8nn3 – Group Membership *

Comma-separated list of groups to whom the user from list 0x8nn1 belongs.

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR GroupList 1 .. Len VISIBLE STRING read-only

0x8nn4 – Local Groups *

List of all local groups

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR GroupList 1 .. Len VISIBLE STRING read-only

Service transfer objects

0xBnn0 – Add User (Service Transfer Object)

InputData

Type Name

UNSIGNED32 cbInputData

UNSIGNED32 NameLen

UNSIGNED32 Domain Len

UNSIGNED32 Password Len

char[Name Len] szName

char[DomainLen] szDomain

char[Password Len] szPassword

No output data

Information model

Beckhoff Device Manager24 Version: 4.9

0xBnn1 – Delete User (Service Transfer Object)

InputData

Type Name

UNSIGNED32 cbInputData

UNSIGNED32 NameLen

UNSIGNED32 Domain Len

char[Name Len] szName

char[DomainLen] szDomain

No output data

0xBnn3 – Set Group Membership (Service Transfer Object) *

InputData

Type Name

UNSIGNED32 cbInputData

UNSIGNED32 UserNameLen

UNSIGNED32 GroupNameLen

UNSIGNED32 DomainNameLen

BOOLEAN IsMemberOfGroup

char[Name Len] szUserName

char[Group Len] szGroupName

char[DomainLen] szDomainName

No output data

0xBnn4 – Create Group (Service Transfer Object) *

InputData

Type Name

UNSIGNED32 cbInputData

UNSIGNED32 GroupNameLen

UNSIGNED32 DomainNameLen

char[Name Len] szGroupName

char[DomainLen] szDomainName

No output data

0xBnn5 – Delete Group (Service Transfer Object) *

InputData

Type Name

UNSIGNED32 cbInputData

UNSIGNED32 GroupNameLen

UNSIGNED32 DomainNameLen

char[Name Len] szGroupName

char[DomainLen] szDomainName

No output data

* Available in MDP 1.0.5.x

0xBnn6 – SetPassword Secure (Service Transfer Object)

Information model

Beckhoff Device Manager 25Version: 4.9

InputData

Type Name

DWORD cb

DWORD cchName

DWORD cchDomain

DWORD cchPassword

DWORD] cchPasswordNew

char[cchName] szName

char[cchDomain] szDomain

char[cchPassword] szPassword

char[cchPasswordNew] szPasswordNew

No output data

6.1.2.4 0x0005 - RAS (WinCE)

This module is available for Windows CE.

TwinCAT/BSD

This function is not available for TwinCAT/BSD.

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0005 00nn UNSIGNED32 read-only

02 VAR Type RAS VISIBLE

STRING

read-only

03 VAR Name RAS VISIBLE

STRING

read-only

04 VAR Dev Type 0x0005 2710 UNSIGNED32 read-only

0x8nn1 - Misc

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Enable BOOLEAN read-write

02 VAR Slow Connection BOOLEAN read-write

03 VAR Use DHCP BOOLEAN read-write

04 VAR Use Auto Addresses BOOLEAN read-write

05 VAR Static Ip Count UNSIGNED32 read-write

06 VAR Static Ip Start VISIBLE STRING read-write

0x8nn2 - Line Names

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Line 1 .. Len VISIBLE STRING read-only

0x8nn3 - Line Enabled

Information model

Beckhoff Device Manager26 Version: 4.9

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Enabled 1 .. Len BOOLEAN read-write

0x8nn4 - Userlist

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Username 1 .. Len VISIBLE STRING read-only

Service transfer objects

0xBnn0 – Add User

InputData

Typ Name

UNSIGNED32 cbUserName

VISIBLE STRING UserName

0xBnn1 – Delete User

InputData

Typ Name

UNSIGNED32 cbUserName

VISIBLE STRING UserName

6.1.2.5 0x0007 - SMB Server

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0007 00nn UNSIGNED32 read-only

02 VAR Type SMB Server VISIBLE

STRING

read-only

03 VAR Name SMB Server VISIBLE

STRING

read-only

04 VAR Dev type 0x0007 2710 UNSIGNED32 read-only

0x8nn1 - SMB Share Names

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR name 1 .. Len VISIBLE STRING read-only

0x8nn2- SMB Path Names

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Path 1 .. Len VISIBLE STRING read-only

0x8nn3- Userlist

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Username 1 .. Len VISIBLE STRING read-only

0x8nn4- Access rights

Information model

Beckhoff Device Manager 27Version: 4.9

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Access right 1 .. Len ARRAY [ ] OF

UNSIGNED32

read-only

Access rights:

USER_DELETE 0 // deletes the specified user from the

ACL

SHARE_READ 10 // grant read Access

SHARE_CHANGE 20 // grant change Access

SHARE_FULL -1 // grant full Access

Under WinCE only USER_DELETE and SHARE_FULL access can be set.

Service transfer objects

0xBnn0 – Add Share (Service Transfer Object)

InputData

Type Name

UNSIGNED32 cbInputData

UNSIGNED32 NameLen

UNSIGNED32 PathLen

char[NameLen] szName

char[PathLen] szPath

0xBnn1 – Del Share (Service Transfer Object)

InputData

Type Name

UNSIGNED32 NameLen

Char[NameLen] ShareName

0xBnn2 – Set user Access rights (Service Transfer Object)

InputData

Type Name

UNSIGNED32 ShareNameLen

UNSIGNED32 UserNameLen

UNSIGNED32 AccessRights

Char[NameLen] ShareName

Char[NameLen] UserName

Information model

Beckhoff Device Manager28 Version: 4.9

6.1.2.6 0x0008 - TwinCAT

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0008 00nn UNSIGNED32 read-only

02 VAR Type TwinCAT VISIBLE

STRING

read-only

03 VAR Name TwinCAT VISIBLE

STRING

read-only

04 VAR Dev type 0x0008 2710 UNSIGNED32 read-only

0x8nn1 – Tc Misc

SubIndex Type Name Requirements Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Major Version UNSIGNED16 read-only

02 VAR Minor Version UNSIGNED16 read-only

03 VAR Build UNSIGNED16 read-only

04 VAR Ams Net ID

VISIBLE

STRING

read-write

05 VAR Reg Level

only for TwinCAT 2 UNSIGNED32 read-only

06 VAR TwinCAT Status UNSIGNED16 read-only

07 VAR RunAsDevice only for WindowsCE UNSIGNED16 read-write

08 VAR ShowTargetVisu only for WindowsCE UNSIGNED16 read-write

09 VAR Log File size only for WindowsCE UNSIGNED32 read-write

10 VAR Log File Path only for WindowsCE VISIBLE

STRING

read-write

11 VAR TwinCAT System ID MDP version 1.6 or

higher

VISIBLE

STRING

read-only

12 VAR TwinCAT Revision UNSIGNED16 read-only

13 VAR Seconds since last

TwinCAT status change

UNSIGNED64 read-only

A restart of the computer is required in order to make a change to the Ams Net ID.

From TwinCAT version >= 3.1.4020.0 the IPC diagnostics version >= 1.0.9.25 is required to change the Ams

Net ID.

Reg Level 0 =CP

Reg Level 1 =I/O

Reg Level 2 =PLC

Reg Level 3 =NC-PTP

Reg Level 4 =NCI

0x8nn2 - TwinCAT Route Name

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR name1 .. Len VISIBLE STRING read-only

0x8nn3 - TwinCAT Route Address

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Address1 .. Len VISIBLE STRING read-only

0x8nn4 - TwinCAT Route AMS Address

Information model

Beckhoff Device Manager 29Version: 4.9

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR AMS1 .. Len VISIBLE STRING read-only

0x8nn5 - TwinCAT Route Flags

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Flags1 .. Len UNSIGNED32 read-only

0x8nn6 - TwinCAT Route Timeout

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Timeout1 .. Len UNSIGNED32 read-only

0x8nn7 - TwinCAT Route Transport

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Transport1 .. Len

UNSIGNED16 read-only

The type E_RouteTransportType is documented in the Beckhoff Information System.

0x8nn8 - TwinCAT Logfile

SubIndex Type Name Type Access

00 VAR Logfile VISIBLE STRING read-only

0x8nn9 – TwinCAT Router Information

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Router Memory Maximum UNSIGNED64 read-only

02 VAR Router Memory Available UNSIGNED64 read-only

03 VAR Registered Ports UNSIGNED32 read-only

04 VAR Registered Drivers UNSIGNED32 read-only

05 VAR Registered Transports UNSIGNED32 read-only

06 VAR Debug Window – True if Ads Logger is

active

BOOLEAN read-only

07 VAR Mailbox Size UNSIGNED32 read-only

08 VAR Mailbox Used Entries UNSIGNED32 read-only

Available in MDP 1.0.10.3

0x8nnA – TwinCAT and OS extended Information TcOs

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR TwinCAT Heap Memory Maximum –

Maximum available Memory for TcOs

Instance

UNSIGNED64 read-only

02 VAR TwinCAT Heap Memory Available –

free Memory in TcOs Instance

UNSIGNED64 read-only

only supported for TC/RTOS.

may be fragmented and can therefore likely not be allocated as a single block.

Information model

Beckhoff Device Manager30 Version: 4.9

Service transfer objects

0xBnn0 - TwinCAT Add Route (Service Transfer Object)

InputData

Type Name

UNSIGNED32 cbInputData

UNSIGNED32 Flags

UNSIGNED32 Timeout

UNSIGNED16 Transport

BYTE[6] NetId

UNSIGNED32 Name Len

UNSIGNED32 Address Len

char[name Len] szName

char[Adresse Len] szAddress

The type E_RouteTransportType is documented in the Beckhoff Information System.

0xBnn1 - TwinCAT Del Route (Service Transfer Object)

InputData

Type Name

UNSIGNED32 NameLen

char[nameLen] szName

6.1.2.7 0x000A - Software versions

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x000A 00nn UNSIGNED32 read-only

02 VAR Type Software VISIBLE

STRING

read-only

03 VAR Name Software VISIBLE

STRING

read-only

04 VAR Dev type 0x000A 2710 UNSIGNED32 read-only

0x8nn1 - Name

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Name 1 .. Len VISIBLE STRING read-only

0x8nn2 - Company

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Company 1 .. Len VISIBLE STRING read-only

0x8nn3 - Date

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Date 1 .. Len VISIBLE STRING read-only

Information model

Beckhoff Device Manager 31Version: 4.9

0x8nn4 - Version

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Version 1 .. Len VISIBLE STRING read-only

6.1.2.8 0x000B - CPU

This module provides CPU information.

The current version does not support multi-core systems. The current usage of the CPU (%) is

displayed as an averaged value.

0x8nn0 - Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x000B 00nn UNSIGNED32 read-only

02 VAR Type CPU VISIBLE

STRING

read-only

03 VAR Name CPU0 VISIBLE

STRING

read-only

04 VAR Dev type 0x000B 2710 UNSIGNED32 read-only

0x8nn1 - CPU Properties

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR CPU frequency UNSIGNED32 constant

02 VAR Current CPU Usage

(%)

UNSIGNED16 read-only

03 VAR Current CPU

Temperature (°C)

SIGNED16 read-only

Requires BIOS API, see system requirements [}11]

6.1.2.9 0x000C - Memory

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x000C 00nn UNSIGNED32 read-only

02 VAR Type Memory VISIBLE

STRING

read-only

03 VAR Name Memory VISIBLE

STRING

read-only

04 VAR Dev type 0x000C 2710 UNSIGNED32 read-only

Information model

Beckhoff Device Manager32 Version: 4.9

0x8nn1

SubIndex Type Name Requirements Type Access

00 VAR Len UNSIGN

ED16

read-only

01 VAR Program Memory

Allocated

UNSIGN

ED32

read-only

02 VAR Program Memory Available

UNSIGN

ED32

read-only

03 VAR Storage Memory Allocated only for WindowsCE UNSIGN

ED32

read-only

04 VAR Storage Memory Available only for WindowsCE UNSIGN

ED32

read-only

05 VAR Memory Division only for WindowsCE UNSIGN

ED32

read-write

06 VAR Program Memory

Allocated

MDP version 1.7 or

higher

UNSIGN

ED64

read-only

07 VAR Program Memory Available

MDP version 1.7 or

higher

UNSIGN

ED64

read-only

On computers with more than 4 GB of RAM the subindex 01 "Program Memory Allocated" will return Not

Supported. Use subindex 06 instead.

On computers with more than 4 GB of RAM the subindex 02 "Program Memory Available" will return Not

Supported. Use subindex 07 instead.

6.1.2.10 0x000E - Firewall (WinCE)

This module is based on operating system-specific functions and is not automatically supported by

all devices. The module is only available for Windows CE and Windows Embedded Compact.

Module for configuring the Windows CE firewall.

Table 0x8nn1 contains general firewall settings. The tables from 0x8nn2 onwards describe the firewall rules.

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x000E 00nn UNSIGNED32 read-only

02 VAR Type Firewall CE VISIBLE

STRING

read-only

03 VAR Name Firewall CE VISIBLE

STRING

read-only

04 VAR Dev type 0x000E 2710 UNSIGNED32 read-only

0x8nn1 – Firewall Settings

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Activate IPv4 BOOLEAN read-write

02 VAR Activate IPv6 BOOLEAN read-write

03 VAR Persist BOOLEAN read-write

0x8nn2 – Flags

Information model

Beckhoff Device Manager 33Version: 4.9

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Flags1 .. Len UNSIGNED32 read-only

FWF_BLOCK = 01

FWF_ALLOW = 02

FWF_LOG = 04

FWF_INBOUND = 08

FWF_OUTBOUND = 16

FWF_DISABLED = 20

0x8nn3 – Mask

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Mask1 .. Len ENUM read-only

FWM_PRIVATE_HOST = 0x0001

FWM_PUBLIC_HOST = 0x0002

FWM_PORT = 0x0004

FWM_TYPE = 0x0008

FWM_CODE = 0x0010

FWM_PROTOCOL = 0x0020

FWM_ACTION = 0x0040

FWM_TIME_OF_DAY = 0x0080 (not supported)

FWM_DAY_OF_WEEK = 0x0100 (not supported)

FWM_DAY = 0x0200 (not supported)

FWM_MONTH= 0x0400 (not supported)

FWM_PUBLIC_HOST_MASK = 0x0800

FWM_PUBLIC_HOST_PREFIX = 0x1000

0x8nn4 – Private Host

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR IP String 1 .. Len VISIBLE STRING read-only

Only valid if the flags (0x8nn2) contain FWM_PRIVATE_HOST.

0x8nn5 – Public Host

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR IP String 1 .. Len VISIBLE STRING read-only

Only valid if the flags (0x8nn2) contain FWM_PUBLIC_HOST. The content is then a textual representation of

an IPv4 or IPv6 address (depending on the protocol type that is specified in 0x8nn6).

0x8nn6 – Public Host Mask

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Mask1 .. Len VISIBLE STRING read-only

Information model

Beckhoff Device Manager34 Version: 4.9

Only valid if the flags (0x8nn2) contain FWM_PUBLIC_HOST_MASK. If this is an IPv4 rule, this is the subnet

mask. If this is an IPv6 rule, this is the "prefix length".

0x8nn7 – protocol

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Protocol 1 .. Len UNSIGNED32 read-only

Only valid if the flags (0x8nn2) contain FWM_PROTOCOL.

0x8nn8 – Action

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Action 1 .. Len ENUM read-only

BLOCK = 0x01 ALLOW = 0x02 ALLOW_RESPONSE = 0x03

0x8nn9 – port area

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Protocol 1 .. Len UNSIGNED32 read-only

Only valid if the flags (0x8nn2) contain FWM_PORT. Hiword is Max Port; Loword is Min Port. Max Port must

be greater than or equal to Min Port.

0x8nnA – Type & Code

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Protocol 1.. Len UNSIGNED16 read-only

Hibyte is code; lobyte is type. The validity depends on the flags FWM_TYPE and FWM_CODE (0x8nn2).

0x8nnB – description

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Description 1 .. Len VISIBLE STRING read-only

0x8nnC – UID

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR UID 1 .. Len UNSIGNED32 read-only

Service transfer objects

0xBnn0 – Add Rule (Service Transfer Object)

Information model

Beckhoff Device Manager 35Version: 4.9

InputData

type name

UNSIGNED32 cbData

UNSIGNED32 Flags

UNSIGNED32 Mask

union { char szPrivateHost[8*5]; WORD family; }; If FWF_PRIVATE_HOST is set this is the Private

host Ip Address. Otherwise this is the Address Family

to which the rule applies (AF_INET or AF_INET6)

Char[8*5] Public Host IP

union { BYTE b[4]; UINT publicHostPrefixLength; }; If FWM_PUBLIC_HOST_MASK is set this is the

public host mask for an IPv4 Address. If

FWM_PUBLIC_HOST_PREFIX is set this is the

public host prfix length for an IPv6 Address.

UNSIGNED32 Protocol

UNSIGNED32 Actions

UNSIGNED32 PortRange (HIWORD = max | LOWORD = min)

UNSIGNED16 type & Code (HBYTE = code | LOBYTE = type)

UNSIGNED32 DescriptionLen

char[DescriptionLen] szDescription

0xBnn1 – Delete Rule (Service Transfer Object)

InputData

type name

UNSIGNED32 UId (From Table 8x8nnC)

Information model

Beckhoff Device Manager36 Version: 4.9

6.1.2.11 0x0010 - File System Object

The module offers access to the local file system via Service Transfer Objects, which enable the browsing of

directories and access to files.

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0010 00nn UNSIGNED32 read-only

02 VAR Type FSO VISIBLE

STRING

read-only

03 VAR Name FSO VISIBLE

STRING

read-only

04 VAR Dev type 0x0010 2710 UNSIGNED32 read-only

0xBnn0 - Dir Service Transfer

This object returns all files and subdirectories of a given directory path (e.g. for browsing directories).

The path specification can contain placeholders, e.g. '*' or '?'. If the string ends with a placeholder, a Dot (.)

or the directory name, the user must have access rights to the main directory and all subdirectories of the

path.

InputData

Type Name

UNSIGNED32 cbsRootDir

VISIBLE STRING sRootDir

OutputData

Type Name

UNSIGNED32 Version = 0

UNSIGNED32 cbData

UNSIGNED32 cDirs

UNSIGNED32 cFiles

UNSIGNED32 nOffsFirstDir //Offset of the first DirectoryInfo

structure

UNSIGNED32 nOffsFirstFile //Offset of the first FileInfo structure

DirectoryInfo

Type Name

UNSIGNED32 nOffsetNextDir

UNSIGNED32 cchName

Char[cchName] szName

FileInfo

Type Name

UNSIGNED32 nOffsetNextFile

SIGNED64 Filesize

UNSIGNED32 FileAttributes

UNSIGNED32 cchFilename

Char[cchFilename] szName

0xBnn1 – GetFile Service Transfer

Service Transfer Objects for reading from and writing to a file

Information model

Beckhoff Device Manager 37Version: 4.9

This function provides output data. Please avoid parallel accesses by other clients, as this can lead

to overwriting of the output data.

Reading from and writing to large files can take place via multiple calls. The file is initially opened by

specifying a file name, then specifying the Continuation Handle that is returned with tFileResponse. The

maximum size of a data segment is defined by the parameter cbMaxRead.

Either a file name or a Continuation Handle must always be specified. If both are specified simultaneously or

if none is specified, this leads to the return value E_INVALIDDATA.

InputData

Type Name Meaning

UNSIGNED32 cbFilename Length of the file name in characters

UNSIGNED32 Continuation handle The Continuation Handle returned by GetFile

OutputData must be specified for subsequent read

accesses.

UNSIGNED32 cbMaxRead Maximum size of the return value. This is the number of

bytes that are to be read, plus the size of the

OutputData structure. The value must always be larger

than the size of the OutputData structure.

Char[cbFilename] Filename Path and file name to be opened for reading

OutputData

Type Name Meaning

UNSIGNED32 cbData Number of bytes that were read

UNSIGNED32 Continuation handle If data still remain to be read, this Continuation Handle

is used for subsequent read accesses

UNSIGNED32 bFinished Indicates whether more data can still be read from the

file. "True" = reading of the data is complete and no

further data are available.

0 = false; anything else = true

BYTE[cbData] data Memory area for the data to be read

0xBnn2 - WriteFile Service Transfer

This function provides output data. Please avoid parallel accesses by other clients, as this can lead

to overwriting of the output data.

InputData

Type Name Meaning

UNSIGNED32 cbFilename Length of the file name in characters

UNSIGNED32 Continuation handle The Continuation Handle returned by WriteFile

OutputData must be specified for subsequent write

accesses.

UNSIGNED32 cbData Number of bytes which are to be written

UNSIGNED32 bWriteCompleted Indicates the completion of the file access. If ! =0, the

file is closed after the final access.

Char[cbFilename] Filename File name

BYTE[cbData] data Data that is to be written

OutputData

Type Name Meaning

UNSIGNED32 Continuation handle Continuation Handle for writing further data to the file

Information model

Beckhoff Device Manager38 Version: 4.9

0xBnn3 - CopyFile Service Transfer

Copy or move the source file to the target

InputData

Type Name Meaning

UNSIGNED32 cbSrc Length of the source file name

UNSIGNED32 cbDst Length of the target file name

UNSIGNED32 Flags One or more of the following flags:

0x00000001 = copy file.

(If the flag is not set, the file is moved.)0x00000002 =

overwrite existing file

Char[cbSource] Source Filename Complete path to the source file

Char[cbDst] Destination Filename Complete path to the destination file

0xBnn4 - DeleteFile Service Transfer

Delete file or directory.

InputData

Type Name Meaning

UNSIGNED32 cbFilename Length of the file name

UNSIGNED32 bRecurse Delete an entire directory incl. subdirectories (= recursive)

0 = false; anything else = true

Char[cbFilename] Filename Path to the file or directory

0xBnn5 - mkdir Service Transfer

Create a new directory

InputData

Type Name Meaning

UNSIGNED32 cbFilename Length of the directory name

UNSIGNED32 bRecurse Create directories recursively

0 = false; anything else = true

char[cbFilename] Filename Name of the new directory

Information model

Beckhoff Device Manager 39Version: 4.9

6.1.2.12 0x0013 - Display Device

Properties of the display adapter. If several adapters are installed, there is an instance for each one.

Table 0x8nn2 is a list of all available display modes, while the current display mode is shown in table

0x8nn1.

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0013 00nn UNSIGNED32 read-only

02 VAR Type Display Device VISIBLE

STRING

read-only

03 VAR Name Device Name VISIBLE

STRING

read-only

04 VAR Dev type 0x0013 2710 UNSIGNED32 read-only

0x8nn1 – Device settings

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR ID of active display

mode

UNSIGNED8 read-write

0x8nn2 – Display modes

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 .. Len VAR Mode VISIBLE STRING read-only

0x8nn3 – Dim function

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR IsPrimaryDisplay BOOLEAN read-only

02 VAR Com Port

VISIBLE STRING read-write

03 VAR Version UNSIGNED32 read-only

04 VAR Brightness

UNSIGNED32 read-write

05 VAR Light

BOOLEAN read-write

Dim function Info

The dimming function is not supported by all devices.

In Windows CE, the dimming function is only available for the primary monitor. "Com Port" must be set to

the configured virtual com port, (e.g "COM4").

System requirements:

Windows Embedded Standard (WES): MDP version 1.7 or higher

Com Port Info

Windows Embedded Standard (WES): e.g. "Com4"

Windows CE: under Windows CE, the Com Port must end with a colon, e.g."COM4:"

Brightness Info

Valid values: 20-100 (20 lowest brightness, 100 maximum brightness)

Light Info

Valid values: TRUE = background light ON, FALSE = background light OFF

Information model

Beckhoff Device Manager40 Version: 4.9

0xBnn0 – Identify Com Port (Service Transfer Object)

InputData

Type Name

UNSIGNED8 DummyByte

Identify Com Port Info

Identification of the com port(s) is started by setting any value. If the call is successful, the field 0x8nn3

subindex 2 is set. If the call fails, an error code is issued.

System requirements:

Windows Embedded Standard (WES): MDP version 1.7 or higher

Windows CE: not supported

0xBnn1 – Save brightness persistent

InputData

Type Name

UNSIGNED8 DummyByte

6.1.2.13 0x0014 - Enhanced Write Filter (EWF)

System requirements

This module is based on operating system-specific functions and is not automatically supported by

all devices.

The module requires the Windows Embedded Standard version as operating system (including

Windows XP Embedded)

TwinCAT/BSD

This function is not available for TwinCAT/BSD.

Configuration of the "Enhanced Write Filters" of Windows Embedded Standard.

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0014 00nn UNSIGNED32 read-only

02 VAR Type EWF VISIBLE

STRING

read-only

03 VAR Name EWF VISIBLE

STRING

read-only

04 VAR Dev Type 0x0014 2710 UNSIGNED32 read-only

0x8nn1 – Volume Name

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR Volume Name VISIBLE STRING read-only

0x8nn2 – Volume ID

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR Volume ID VISIBLE STRING read-only

0x8nn3 – State

Information model

Beckhoff Device Manager 41Version: 4.9

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR State UNSIGNED32 read-only

Values:

0 = EWF_ENABLED

1 = EWF_DISABLED

0x8nn4 – type

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR type UNSIGNED32 read-only

Values:

0 = EWF_DISK

1 = EWF_RAM

2 = EWF_RAM_REG

0x8nn5 – Boot command

SubIndex type name type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR Boot command UNSIGNED32 read-write

OUT Values

0 = No Command

1 = Enable

2 = Disable

3 = SetLevel

4 = Commit

IN Values

0 = ClearCommand

1 = EwfMgrEnable

2 = EwfMgrDisable without Commit

3 = EwfMgrDisable with Commit

4 = EwfMgrCommit

The values IN and OUT do not correspond!

Service transfer objects

0xBnn0 - EWF Commit and Disable Live*

InputData

Type Name

CHAR Volume name

Information model

Beckhoff Device Manager42 Version: 4.9

6.1.2.14 0x0015 - File Based Write Filter (FBWF)

System requirements

This module is based on operating system-specific functions and is not automatically supported by

all devices.

The module requires the Windows Embedded Standard version as operating system (including

Windows XP Embedded)

TwinCAT/BSD

This function is not available for TwinCAT/BSD.

Configuration of the "File Based Write Filter" of Windows Embedded Standard.

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0015 00nn UNSIGNED32 read-only

02 VAR Type FBWF VISIBLE

STRING

read-only

03 VAR Name FBWF VISIBLE

STRING

read-only

04 VAR Dev type 0x0015 2710 UNSIGNED32 read-only

0x8nn1 - CurrentState

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR State UNSIGNED32 read-only

02 VAR Compression UNSIGNED32 read-only

03 VAR PreAllocation UNSIGNED32 read-only

0x8nn2 - NextState

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR State UNSIGNED32 read-write

02 VAR Compression UNSIGNED32 read-write

03 VAR PreAllocation UNSIGNED32 read-write

0x8nn3 - Volumes

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR Volume VISIBLE STRING read-only

0x8nn4 - Exclusions

Information model

Beckhoff Device Manager 43Version: 4.9

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR Exclusions for one

volume at a time

(corresponding

volumes see

0x8nn3). The return

value is a multi-

string. Each

individual string is

singly null-

terminated, the

whole multi-string is

doubly null-

terminated.

VISIBLE STRING read-only

Service transfer objects

0xBnn0 - FBWF Add Volume Command object

InputData

Type Name

DWORD cbData

DWORD cbVolume

CHAR[cbVolume] cVolume

0xBnn1 - FBWF Remove Volume Command object

InputData

Type Name

DWORD cbData

DWORD cbVolume

BOOL bClearExclusion

CHAR[cbVolume] cVolume

bClearExclusion: if "TRUE", the exclusion list for this volume is deleted.

0xBnn2- FBWF Add Exclusion Command object

InputData

Type Name

DWORD cbData

DWORD cbVolume

DWORD cbFilePath

CHAR[cbVolume] cVolume

CHAR[cbFilePath] cFilePath

0xBnn3- FBWF Enum Exclusions Command object

Information model

Beckhoff Device Manager44 Version: 4.9

InputData

Type Name

DWORD cbData

DWORD cbVolume

DWORD Index

CHAR[cbVolume] cVolume

OutputData

Type Name

DWORD cbFilePath

CHAR[cbFilePath] cFilePath

0xBnn4 - FBWF Remove Exclusion Command object

InputData

Type Name

DWORD cbData

DWORD cbVolume

DWORD cbFilePath

CHAR[cbVolume] cVolume

CHAR[cbFilePath] cFilePath

0xBnn5 - FBWF Commit File Command object

InputData

Type Name

DWORD cbData

DWORD cbVolume

DWORD cbFilePath

CHAR[cbVolume] cVolume

CHAR[cbFilePath] cFilePath

0xBnn6 - FBWF Commit All Command object*

InputData

Type Name

DWORD cbData

DWORD cbVolume

CHAR[cbVolume] cVolume

* Not supported for security reasons

0xBnn7 - FBWF RestoreFile Command object

InputData

Type Name

DWORD cbData

DWORD cbVolume

DWORD cbFilePath

CHAR[cbVolume] cVolume

CHAR[cbFilePath] cFilePath

System requirements

Driver Installed FBWF driver

Operating system Windows Embedded

(XPE, WES, WES7)

Information model

Beckhoff Device Manager 45Version: 4.9

6.1.2.15 0x0018 - Operating System

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0018 00nn UNSIGNED32 read-only

02 VAR Type OperatingSyste

VISIBLE

STRING

read-only

03 VAR Name <OS Name> VISIBLE

STRING

read-only

04 VAR Dev type 0x0018 2710 UNSIGNED32 read-only

0x8nn1

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR OS Major Version UNSIGNED32 read-only

02 VAR OS Minor Version UNSIGNED32 read-only

03 VAR OS Build UNSIGNED32 read-only

04 VAR CSD Version VISIBLE STRING read-only

0x8nn2

SubIndex Type Name Type Access

01 VAR Uptime in seconds UNSIGNED64 read-only

System requirements

MDP Version 1.3.42 or higher

6.1.2.16 0x0019 - RAID

This module can be used to manage and check physical components in a RAID hard disk array.

0x8nn0 – Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x0019 00nn UNSIGNED32 read-only

02 VAR Type RAID Controller VISIBLE

STRING

read-only

03 VAR Name SCSI Number VISIBLE

STRING

read-only

04 VAR Dev type 0x0019 2710 UNSIGNED32 read-only

Information model

Beckhoff Device Manager46 Version: 4.9

0x8nn1 – Controller Info

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR State UNSIGNED32 read-only

02 VAR Offline Reason UNSIGNED32 read-only

State Info

1 = GOOD => Normal operation.

2 = FAILED => Controller signals error. In this state read or write access to the controller should be avoided.

3 = OFFLINE => The controller is in a transition mode and currently unreachable.

In this state, read or write access to the controller must be avoided.

4 = POWEROFF => The controller is currently switched off. (This state may have been preceded by an

error.)

Offline Reason Info

0 = NO_REASON => reason unknown.

1 = INITIALIZING => The driver is still being initialized by the controller.

2 = BUS_DEGRADED => The physical interface to the SAS or SATA domain is not working properly

(sporadic errors).

3 = BUS_FAILURE => The physical interface to the SAS or SATA domain is not working.

0x8nn2 – RAID Set: Type

The tables 0x8nn2, 0x8nn3 and 0x8nn4 are connected to each other. Each table contains information on

existing Raid Sets. The same index references the same Raid Set.

Example: In all three tables index 1 contains detailed information on the same Raid Set.

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR Type UNSIGNED8 read-only

Type info

0 = no RAID

1 = RAID type 0

2 = RAID type 1

3 = RAID type 10

4 = RAID type 5

5 = RAID type 15

255 = RAID type is not a standard type

Information model

Beckhoff Device Manager 47Version: 4.9

0x8nn3 – RAID Set: State & Info

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR State & Info UNSIGNED16 read-only

State = low byte

0 = OK => indicator: RAID set is ready for operation.

1 = DEGRADED => indicator: RAID set no longer operates in fault-tolerant mode.

2 = REBUILDING => indicator: RAID set is being restored. This follows a "degraded operation". As soon as

the rebuild is completed successfully, the state is set to "OK". If the rebuild fails, the state is updated

accordingly.

3 = FAILED => indicator: RAID set shows faulty behavior. The function of the RAID Set is no longer

ensured. Data loss is imminent or has already occurred.

Information = high byte

state == OK: Info is 0.

state == DEGRADED: Info contains the index of the faulty hard disk.

state == REBUILDING: Info contains the percentage value of the recovery. The value is in the range 0 to

100 (0x0 to 0x64).

state == FAILED: Information is 0 or vendor-specific. A manufacturer-specific code may contain hard disk or

controller error messages.

Not supported

0x8nn4 – RAID Set: Hard disks

This is a list of all RAID Sets in the current system configuration. Each line contains a specific number of

hard disks. One byte of the value represents an index in the 0x8nn9 / 0x8nnA list. Detailed information can

be found in the 0x8nn9 and 0x8nnA tables. The maximum value is 255.

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR Hard disks ARRAY [ ] OF

UNSIGNED8

read-only

0x8nn5 – 0x8nn8 : Reserved

0x8nn9 – Hard disk: Serial number

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR Serial Number VISIBLE STRING read-only

Serial Number

Maximum 40 bytes

0x8nnA – Hard disk: State

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01..Len VAR State UNSIGNED8 read-only

State

0 = OK => indicator: The physical hard disk is in operation.

1 = REBUILDING => indicator: The physical hard disk is part of the configuration of a RAID set.

As soon as the build is completed successfully, the state changes to OK.

If the (re-)configuration is unsuccessful, the state is updated accordingly.

2 = FAILED => indicator: The physical hard disk has reported unrecoverable errors to the controller, or it

has started a manufacturer-specific action, in order to remove the physical hard disk from the RAID set.

The behavior of the hard disk cannot be guaranteed, data loss is imminent or has already occurred.

3 = DEGRADED => indicator: The physical hard disk has sent a SMART message to the controller.

Information model

Beckhoff Device Manager48 Version: 4.9

Not Supported

System requirements

OS XPE, WES, WES 7

XP, Windows 7, Windows 10

RAID driver IMSM 7.0 PV or higher

6.1.2.17 0x001B - Fan

Each fan for which information is available is represented by a dedicated MDP module instance (not all

devices support this).

0x8nn0 - Module Header

SubIndex Type Name Value Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Address 0x001b 00nn UNSIGNED32 read-only

02 VAR Type Fan VISIBLE

STRING

read-only

03 VAR Name Adapter Name VISIBLE

STRING

read-only

04 VAR Dev type 0x001b 2710 UNSIGNED32 read-only

0x8nn1 - Fan Properties

SubIndex Type Name Type Access

00 VAR Len UNSIGNED16 read-only

01 VAR Fan speed (rpm) SIGNED 16 read-only

6.1.2.18 0x001C - Mainboard

System requirements

This module is not supported by all devices, since it requires a special BIOS.

If your device does not support this module, the program will issue Overview of error codes [}82]

0xECA60105 ("No data available").

See also: ADS Return Codes [}84]

Appendix

Beckhoff Device Manager 83Version: 4.9

Module specific error codes

Code Module Meaning

0xECAF0401 User Mgmt User already exists

0xECAF0402 User Mgmt User does not exist

0xECAF0403 User Mgmt Group already exists

0xECAF0404 User Mgmt Group does not exist

0xECAF0410 SMB Server is not installed

0xECAF0411 SMB Share already exists

0xECAF0412 SMB Share does not exist

0xECAF0420 TwinCAT Ads route already exists

0xECAF0421 TwinCAT Ads port could not be opened

0xECAF0430 Datastore A variable with this name already

exists

0xECAF0431 Datastore Variable with requested name does

not exist

0xECAF0432 Datastore Section with specified name does

not exist

0xECAF0433 Datastore The name of the variable was

invalid

0xECAF0440 Registry The name of the key (e.g. "HKLM")

was invalid

0xECAF0601 Display RESTART/ computer must be

restarted for the graphics mode to

work

0xECAF0602 Display FAILED/ display driver failed

specified graphics mode

0xECAF0603 Display BADMODE/ graphics mode is not

supported

0xECAF0604 Display NOTUPDATED/ unable to write

settings to the registry

0xECAF0605 Display BADFLAGS/ invalid set of flags

0xECAF0606 Display BADPARAM/ Invalid parameter or

invalid combination of flags

0xECAF0607 Display BADDUALVIEW/ System is

DualView capable

0xECAF0608 Display Com Port not set

0xECAF0609 Display Invalid Value

0xECAF0610 Display Invalid Command

0xECAF0611 Display Invalid Com Port

0xECAF0701 Mass Storage Monitoring Flashdrive data not available

0xECAF0702 Mass Storage Monitoring Hard disk data not available

Appendix

Beckhoff Device Manager84 Version: 4.9

8.4 ADS Return Codes

Grouping of error codes:

Global error codes: ADS Return Codes [}84]... (0x9811_0000 ...)

Router error codes: ADS Return Codes [}84]... (0x9811_0500 ...)

General ADS errors: ADS Return Codes [}85]... (0x9811_0700 ...)

RTime error codes: ADS Return Codes [}87]... (0x9811_1000 ...)

Global error codes

Hex Dec HRESULT Name Description

0x0 0 0x98110000 ERR_NOERROR No error.

0x1 1 0x98110001 ERR_INTERNAL Internal error.

0x2 2 0x98110002 ERR_NORTIME No real time.

0x3 3 0x98110003 ERR_ALLOCLOCKEDMEM Allocation locked – memory error.

0x4 4 0x98110004 ERR_INSERTMAILBOX Mailbox full – the ADS message could not be sent.

Reducing the number of ADS messages per cycle will

help.

0x5 5 0x98110005 ERR_WRONGRECEIVEHMSG Wrong HMSG.

0x6 6 0x98110006 ERR_TARGETPORTNOTFOUND Target port not found – ADS server is not started, not

reachable or not installed.

0x7 7 0x98110007 ERR_TARGETMACHINENOTFOUND Target computer not found – AMS route was not found.

0x8 8 0x98110008 ERR_UNKNOWNCMDID Unknown command ID.

0x9 9 0x98110009 ERR_BADTASKID Invalid task ID.

0xA 10 0x9811000A ERR_NOIO No IO.

0xB 11 0x9811000B ERR_UNKNOWNAMSCMD Unknown AMS command.

0xC 12 0x9811000C ERR_WIN32ERROR Win32 error.

0xD 13 0x9811000D ERR_PORTNOTCONNECTED Port not connected.

0xE 14 0x9811000E ERR_INVALIDAMSLENGTH Invalid AMS length.

0xF 15 0x9811000F ERR_INVALIDAMSNETID Invalid AMS Net ID.

0x10 16 0x98110010 ERR_LOWINSTLEVEL Installation level is too low –TwinCAT 2 license error.

0x11 17 0x98110011 ERR_NODEBUGINTAVAILABLE No debugging available.

0x12 18 0x98110012 ERR_PORTDISABLED Port disabled – TwinCAT system service not started.

0x13 19 0x98110013 ERR_PORTALREADYCONNECTED Port already connected.

0x14 20 0x98110014 ERR_AMSSYNC_W32ERROR AMS Sync Win32 error.

0x15 21 0x98110015 ERR_AMSSYNC_TIMEOUT AMS Sync Timeout.

0x16 22 0x98110016 ERR_AMSSYNC_AMSERROR AMS Sync error.

0x17 23 0x98110017 ERR_AMSSYNC_NOINDEXINMAP No index map for AMS Sync available.

0x18 24 0x98110018 ERR_INVALIDAMSPORT Invalid AMS port.

0x19 25 0x98110019 ERR_NOMEMORY No memory.

0x1A 26 0x9811001A ERR_TCPSEND TCP send error.

0x1B 27 0x9811001B ERR_HOSTUNREACHABLE Host unreachable.

0x1C 28 0x9811001C ERR_INVALIDAMSFRAGMENT Invalid AMS fragment.

0x1D 29 0x9811001D ERR_TLSSEND TLS send error – secure ADS connection failed.

0x1E 30 0x9811001E ERR_ACCESSDENIED Access denied – secure ADS access denied.

Router error codes

Appendix

Beckhoff Device Manager 85Version: 4.9

Hex Dec HRESULT Name Description

0x500 1280 0x98110500 ROUTERERR_NOLOCKEDMEMORY Locked memory cannot be allocated.

0x501 1281 0x98110501 ROUTERERR_RESIZEMEMORY The router memory size could not be changed.

0x502 1282 0x98110502 ROUTERERR_MAILBOXFULL The mailbox has reached the maximum number of

possible messages.

0x503 1283 0x98110503 ROUTERERR_DEBUGBOXFULL The Debug mailbox has reached the maximum

number of possible messages.

0x504 1284 0x98110504 ROUTERERR_UNKNOWNPORTTYPE The port type is unknown.

0x505 1285 0x98110505 ROUTERERR_NOTINITIALIZED The router is not initialized.

0x506 1286 0x98110506 ROUTERERR_PORTALREADYINUSE The port number is already assigned.

0x507 1287 0x98110507 ROUTERERR_NOTREGISTERED The port is not registered.

0x508 1288 0x98110508 ROUTERERR_NOMOREQUEUES The maximum number of ports has been reached.

0x509 1289 0x98110509 ROUTERERR_INVALIDPORT The port is invalid.

0x50A 1290 0x9811050A ROUTERERR_NOTACTIVATED The router is not active.

0x50B 1291 0x9811050B ROUTERERR_FRAGMENTBOXFULL The mailbox has reached the maximum number for

fragmented messages.

0x50C 1292 0x9811050C ROUTERERR_FRAGMENTTIMEOUT A fragment timeout has occurred.

0x50D 1293 0x9811050D ROUTERERR_TOBEREMOVED The port is removed.

General ADS error codes

Appendix

Beckhoff Device Manager86 Version: 4.9

Hex Dec HRESULT Name Description

0x700 1792 0x98110700 ADSERR_DEVICE_ERROR General device error.

0x701 1793 0x98110701 ADSERR_DEVICE_SRVNOTSUPP Service is not supported by the server.

0x702 1794 0x98110702 ADSERR_DEVICE_INVALIDGRP Invalid index group.

0x703 1795 0x98110703 ADSERR_DEVICE_INVALIDOFFSET Invalid index offset.

0x704 1796 0x98110704 ADSERR_DEVICE_INVALIDACCESS Reading or writing not permitted.

0x705 1797 0x98110705 ADSERR_DEVICE_INVALIDSIZE Parameter size not correct.

0x706 1798 0x98110706 ADSERR_DEVICE_INVALIDDATA Invalid data values.

0x707 1799 0x98110707 ADSERR_DEVICE_NOTREADY Device is not ready to operate.

0x708 1800 0x98110708 ADSERR_DEVICE_BUSY Device is busy.

0x709 1801 0x98110709 ADSERR_DEVICE_INVALIDCONTEXT Invalid operating system context. This can result

from use of ADS blocks in different tasks. It may be

possible to resolve this through multitasking

synchronization in the PLC.

0x70A 1802 0x9811070A ADSERR_DEVICE_NOMEMORY Insufficient memory.

0x70B 1803 0x9811070B ADSERR_DEVICE_INVALIDPARM Invalid parameter values.

0x70C 1804 0x9811070C ADSERR_DEVICE_NOTFOUND Not found (files, ...).

0x70D 1805 0x9811070D ADSERR_DEVICE_SYNTAX Syntax error in file or command.

0x70E 1806 0x9811070E ADSERR_DEVICE_INCOMPATIBLE Objects do not match.

0x70F 1807 0x9811070F ADSERR_DEVICE_EXISTS Object already exists.

0x710 1808 0x98110710 ADSERR_DEVICE_SYMBOLNOTFOUND Symbol not found.

0x711 1809 0x98110711 ADSERR_DEVICE_SYMBOLVERSIONINVALID Invalid symbol version. This can occur due to an

online change. Create a new handle.

0x712 1810 0x98110712 ADSERR_DEVICE_INVALIDSTATE Device (server) is in invalid state.

0x713 1811 0x98110713 ADSERR_DEVICE_TRANSMODENOTSUPP AdsTransMode not supported.

0x714 1812 0x98110714 ADSERR_DEVICE_NOTIFYHNDINVALID Notification handle is invalid.

0x715 1813 0x98110715 ADSERR_DEVICE_CLIENTUNKNOWN Notification client not registered.

0x716 1814 0x98110716 ADSERR_DEVICE_NOMOREHDLS No further handle available.

0x717 1815 0x98110717 ADSERR_DEVICE_INVALIDWATCHSIZE Notification size too large.

0x718 1816 0x98110718 ADSERR_DEVICE_NOTINIT Device not initialized.

0x719 1817 0x98110719 ADSERR_DEVICE_TIMEOUT Device has a timeout.

0x71A 1818 0x9811071A ADSERR_DEVICE_NOINTERFACE Interface query failed.

0x71B 1819 0x9811071B ADSERR_DEVICE_INVALIDINTERFACE Wrong interface requested.

0x71C 1820 0x9811071C ADSERR_DEVICE_INVALIDCLSID Class ID is invalid.

0x71D 1821 0x9811071D ADSERR_DEVICE_INVALIDOBJID Object ID is invalid.

0x71E 1822 0x9811071E ADSERR_DEVICE_PENDING Request pending.

0x71F 1823 0x9811071F ADSERR_DEVICE_ABORTED Request is aborted.

0x720 1824 0x98110720 ADSERR_DEVICE_WARNING Signal warning.

0x721 1825 0x98110721 ADSERR_DEVICE_INVALIDARRAYIDX Invalid array index.

0x722 1826 0x98110722 ADSERR_DEVICE_SYMBOLNOTACTIVE Symbol not active.

0x723 1827 0x98110723 ADSERR_DEVICE_ACCESSDENIED Access denied.

0x724 1828 0x98110724 ADSERR_DEVICE_LICENSENOTFOUND Missing license.

0x725 1829 0x98110725 ADSERR_DEVICE_LICENSEEXPIRED License expired.

0x726 1830 0x98110726 ADSERR_DEVICE_LICENSEEXCEEDED License exceeded.

0x727 1831 0x98110727 ADSERR_DEVICE_LICENSEINVALID Invalid license.

0x728 1832 0x98110728 ADSERR_DEVICE_LICENSESYSTEMID License problem: System ID is invalid.

0x729 1833 0x98110729 ADSERR_DEVICE_LICENSENOTIMELIMIT License not limited in time.

0x72A 1834 0x9811072A ADSERR_DEVICE_LICENSEFUTUREISSUE Licensing problem: time in the future.

0x72B 1835 0x9811072B ADSERR_DEVICE_LICENSETIMETOLONG License period too long.

0x72C 1836 0x9811072C ADSERR_DEVICE_EXCEPTION Exception at system startup.

0x72D 1837 0x9811072D ADSERR_DEVICE_LICENSEDUPLICATED License file read twice.

0x72E 1838 0x9811072E ADSERR_DEVICE_SIGNATUREINVALID Invalid signature.

0x72F 1839 0x9811072F ADSERR_DEVICE_CERTIFICATEINVALID Invalid certificate.

0x730 1840 0x98110730 ADSERR_DEVICE_LICENSEOEMNOTFOUND Public key not known from OEM.

0x731 1841 0x98110731 ADSERR_DEVICE_LICENSERESTRICTED License not valid for this system ID.

0x732 1842 0x98110732 ADSERR_DEVICE_LICENSEDEMODENIED Demo license prohibited.

0x733 1843 0x98110733 ADSERR_DEVICE_INVALIDFNCID Invalid function ID.

0x734 1844 0x98110734 ADSERR_DEVICE_OUTOFRANGE Outside the valid range.

0x735 1845 0x98110735 ADSERR_DEVICE_INVALIDALIGNMENT Invalid alignment.

0x736 1846 0x98110736 ADSERR_DEVICE_LICENSEPLATFORM Invalid platform level.

Appendix

Beckhoff Device Manager 87Version: 4.9

Hex Dec HRESULT Name Description

0x737 1847 0x98110737 ADSERR_DEVICE_FORWARD_PL Context – forward to passive level.

0x738 1848 0x98110738 ADSERR_DEVICE_FORWARD_DL Context – forward to dispatch level.

0x739 1849 0x98110739 ADSERR_DEVICE_FORWARD_RT Context – forward to real time.

0x740 1856 0x98110740 ADSERR_CLIENT_ERROR Client error.

0x741 1857 0x98110741 ADSERR_CLIENT_INVALIDPARM Service contains an invalid parameter.

0x742 1858 0x98110742 ADSERR_CLIENT_LISTEMPTY Polling list is empty.

0x743 1859 0x98110743 ADSERR_CLIENT_VARUSED Var connection already in use.

0x744 1860 0x98110744 ADSERR_CLIENT_DUPLINVOKEID The called ID is already in use.

0x745 1861 0x98110745 ADSERR_CLIENT_SYNCTIMEOUT Timeout has occurred – the remote terminal is not

responding in the specified ADS timeout. The route

setting of the remote terminal may be configured

incorrectly.

0x746 1862 0x98110746 ADSERR_CLIENT_W32ERROR Error in Win32 subsystem.

0x747 1863 0x98110747 ADSERR_CLIENT_TIMEOUTINVALID Invalid client timeout value.

0x748 1864 0x98110748 ADSERR_CLIENT_PORTNOTOPEN Port not open.

0x749 1865 0x98110749 ADSERR_CLIENT_NOAMSADDR No AMS address.

0x750 1872 0x98110750 ADSERR_CLIENT_SYNCINTERNAL Internal error in Ads sync.

0x751 1873 0x98110751 ADSERR_CLIENT_ADDHASH Hash table overflow.

0x752 1874 0x98110752 ADSERR_CLIENT_REMOVEHASH Key not found in the table.

0x753 1875 0x98110753 ADSERR_CLIENT_NOMORESYM No symbols in the cache.

0x754 1876 0x98110754 ADSERR_CLIENT_SYNCRESINVALID Invalid response received.

0x755 1877 0x98110755 ADSERR_CLIENT_SYNCPORTLOCKED Sync Port is locked.

0x756 1878 0x98110756 ADSERR_CLIENT_REQUESTCANCELLED The request was cancelled.

RTime error codes

Hex Dec HRESULT Name Description

0x1000 4096 0x98111000 RTERR_INTERNAL Internal error in the real-time system.

0x1001 4097 0x98111001 RTERR_BADTIMERPERIODS Timer value is not valid.

0x1002 4098 0x98111002 RTERR_INVALIDTASKPTR Task pointer has the invalid value 0 (zero).

0x1003 4099 0x98111003 RTERR_INVALIDSTACKPTR Stack pointer has the invalid value 0 (zero).

0x1004 4100 0x98111004 RTERR_PRIOEXISTS The request task priority is already assigned.

0x1005 4101 0x98111005 RTERR_NOMORETCB No free TCB (Task Control Block) available. The

maximum number of TCBs is 64.

0x1006 4102 0x98111006 RTERR_NOMORESEMAS No free semaphores available. The maximum number of

semaphores is 64.

0x1007 4103 0x98111007 RTERR_NOMOREQUEUES No free space available in the queue. The maximum

number of positions in the queue is 64.

0x100D 4109 0x9811100D RTERR_EXTIRQALREADYDEF An external synchronization interrupt is already applied.

0x100E 4110 0x9811100E RTERR_EXTIRQNOTDEF No external sync interrupt applied.

0x100F 4111 0x9811100F RTERR_EXTIRQINSTALLFAILED Application of the external synchronization interrupt has

failed.

0x1010 4112 0x98111010 RTERR_IRQLNOTLESSOREQUAL Call of a service function in the wrong context

0x1017 4119 0x98111017 RTERR_VMXNOTSUPPORTED Intel VT-x extension is not supported.

0x1018 4120 0x98111018 RTERR_VMXDISABLED Intel VT-x extension is not enabled in the BIOS.

0x1019 4121 0x98111019 RTERR_VMXCONTROLSMISSING Missing function in Intel VT-x extension.

0x101A 4122 0x9811101A RTERR_VMXENABLEFAILS Activation of Intel VT-x fails.

Specific positive HRESULT Return Codes:

HRESULT Name Description

0x0000_0000 S_OK No error.

0x0000_0001 S_FALSE No error.

Example: successful processing, but with a negative or

incomplete result.

0x0000_0203 S_PENDING No error.

Example: successful processing, but no result is available

yet.

0x0000_0256 S_WATCHDOG_TIMEOUT No error.

Example: successful processing, but a timeout occurred.

TCP Winsock error codes

Appendix

Beckhoff Device Manager88 Version: 4.9

Hex Dec Name Description

0x274C 10060 WSAETIMEDOUT A connection timeout has occurred - error while establishing the

connection, because the remote terminal did not respond properly after a

certain period of time, or the established connection could not be

maintained because the connected host did not respond.

0x274D 10061 WSAECONNREFUSED Connection refused - no connection could be established because the

target computer has explicitly rejected it. This error usually results from an

attempt to connect to a service that is inactive on the external host, that is,

a service for which no server application is running.

0x2751 10065 WSAEHOSTUNREACH No route to host - a socket operation referred to an unavailable host.

More Winsock error codes: Win32 error codes [}88]

8.5 Win32 Error Codes

The following table provides a list of Win32 error codes.

0 [}89], 100 [}91], 200 [}93], 1001 [}95], 1100 [}97], 1200 [}99], 1400 [}104], 1600 [}106], 1800

[}110], 2000 [}112], 3000 [}113], 5000 [}116], 6000 [}119], 8000 [}121], 8500 [}130], 9001 [}134],

10004 [}136], 12000 [}139],

Appendix

Beckhoff Device Manager 89Version: 4.9

Error Description

decimal Hexadecimal Name

0 0x00000000 ERROR_SUCCESS The operation completed successfully.

1 0x00000001 ERROR_INVALID_FUNCTION Incorrect function.

2 0x00000002 ERROR_FILE_NOT_FOUND The system cannot find the file specified.

3 0x00000003 ERROR_PATH_NOT_FOUND The system cannot find the path specified.

4 0x00000004 ERROR_TOO_MANY_OPEN_FILES The system cannot open the file.

5 0x00000005 ERROR_ACCESS_DENIED Access is denied.

6 0x00000006 ERROR_INVALID_HANDLE The handle is invalid.

7 0x00000007 ERROR_ARENA_TRASHED The storage control blocks were destroyed.

8 0x00000008 ERROR_NOT_ENOUGH_MEMORY Not enough storage is available to process this

command.

9 0x00000009 ERROR_INVALID_BLOCK The storage control block address is invalid.

10 0x0000000A ERROR_BAD_ENVIRONMENT The environment is incorrect.

11 0x0000000B ERROR_BAD_FORMAT An attempt was made to load a program with an

incorrect format.

12 0x0000000C ERROR_INVALID_ACCESS The access code is invalid.

13 0x0000000D ERROR_INVALID_DATA The data is invalid.

14 0x0000000E ERROR_OUTOFMEMORY Not enough storage is available to complete this

operation.

15 0x0000000F ERROR_INVALID_DRIVE The system cannot find the drive specified.

16 0x00000010 ERROR_CURRENT_DIRECTORY The directory cannot be removed.

17 0x00000011 ERROR_NOT_SAME_DEVICE The system cannot move the file to a different

disk drive.

18 0x00000012 ERROR_NO_MORE_FILES There are no more files.

19 0x00000013 ERROR_WRITE_PROTECT The media is write protected.

20 0x00000014 ERROR_BAD_UNIT The system cannot find the device specified.

21 0x00000015 ERROR_NOT_READY The device is not ready.

22 0x00000016 ERROR_BAD_COMMAND The device does not recognize the command.

23 0x00000017 ERROR_CRC Data error (cyclic redundancy check).

24 0x00000018 ERROR_BAD_LENGTH The program issued a command but the

command length is incorrect.

25 0x00000019 ERROR_SEEK The drive cannot locate a specific area or track on

the disk.

26 0x0000001A ERROR_NOT_DOS_DISK The specified disk or diskette cannot be

accessed.

27 0x0000001B ERROR_SECTOR_NOT_FOUND The drive cannot find the sector requested.

28 0x0000001C ERROR_OUT_OF_PAPER The printer is out of paper.

29 0x0000001D ERROR_WRITE_FAULT The system cannot write to the specified device.

30 0x0000001E ERROR_READ_FAULT The system cannot read from the specified

device.

31 0x0000001F ERROR_GEN_FAILURE A device attached to the system is not

functioning.

32 0x00000020 ERROR_SHARING_VIOLATION The process cannot access the file because it is

being used by another process.

33 0x00000021 ERROR_LOCK_VIOLATION The process cannot access the file because

another process has locked a portion of the file.

34 0x00000022 ERROR_WRONG_DISK The wrong diskette is in the drive. Insert %2

(Volume Serial Number: %3) into drive %1.

36 0x00000024 ERROR_SHARING_BUFFER_EXCEEDED Too many files opened for sharing.

38 0x00000026 ERROR_HANDLE_EOF Reached the end of the file.

39 0x00000027 ERROR_HANDLE_DISK_FULL The disk is full.

50 0x00000032 ERROR_NOT_SUPPORTED The request is not supported.

51 0x00000033 ERROR_REM_NOT_LIST The remote computer is not available.

52 0x00000034 ERROR_DUP_NAME A duplicate name exists on the network.

53 0x00000035 ERROR_BAD_NETPATH The network path was not found.

54 0x00000036 ERROR_NETWORK_BUSY The network is busy.

55 0x00000037 ERROR_DEV_NOT_EXIST The specified network resource or device is no

longer available.

56 0x00000038 ERROR_TOO_MANY_CMDS The network BIOS command limit has been

reached.

57 0x00000039 ERROR_ADAP_HDW_ERR A network adapter hardware error occurred.

Appendix

Beckhoff Device Manager90 Version: 4.9

Error Description

decimal Hexadecimal Name

58 0x0000003A ERROR_BAD_NET_RESP The specified server cannot perform the

requested operation.

59 0x0000003B ERROR_UNEXP_NET_ERR An unexpected network error occurred.

60 0x0000003C ERROR_BAD_REM_ADAP The remote adapter is not compatible.

61 0x0000003D ERROR_PRINTQ_FULL The printer queue is full.

62 0x0000003E ERROR_NO_SPOOL_SPACE Space to store the file waiting to be printed is not

available on the server.

63 0x0000003F ERROR_PRINT_CANCELLED Your file waiting to be printed was deleted.

64 0x00000040 ERROR_NETNAME_DELETED The specified network name is no longer

available.

65 0x00000041 ERROR_NETWORK_ACCESS_DENIED Network access is denied.

66 0x00000042 ERROR_BAD_DEV_TYPE The network resource type is not correct.

67 0x00000043 ERROR_BAD_NET_NAME The network name cannot be found.

68 0x00000044 ERROR_TOO_MANY_NAMES The name limit for the local computer network

adapter card was exceeded.

69 0x00000045 ERROR_TOO_MANY_SESS The network BIOS session limit was exceeded.

70 0x00000046 ERROR_SHARING_PAUSED The remote server has been paused or is in the

process of being started.

71 0x00000047 ERROR_REQ_NOT_ACCEP No more connections can be made to this remote

computer at this time because there are already

as many connections as the computer can

accept.

72 0x00000048 ERROR_REDIR_PAUSED The specified printer or disk device has been

paused.

80 0x00000050 ERROR_FILE_EXISTS The file exists.

82 0x00000052 ERROR_CANNOT_MAKE The directory or file cannot be created.

83 0x00000053 ERROR_FAIL_I24 Fail on INT 24.

84 0x00000054 ERROR_OUT_OF_STRUCTURES Storage to process this request is not available.

85 0x00000055 ERROR_ALREADY_ASSIGNED The local device name is already in use.

86 0x00000056 ERROR_INVALID_PASSWORD The specified network password is not correct.

87 0x00000057 ERROR_INVALID_PARAMETER The parameter is incorrect.

88 0x00000058 ERROR_NET_WRITE_FAULT A write fault occurred on the network.

89 0x00000059 ERROR_NO_PROC_SLOTS The system cannot start another process at this

time.

Appendix

Beckhoff Device Manager 91Version: 4.9

Error Description

decimal Hexadecimal Name

100 0x00000064 ERROR_TOO_MANY_SEMAPHORES Cannot create another system semaphore.

101 0x00000065 ERROR_EXCL_SEM_ALREADY_OWNED The exclusive semaphore is owned by another

process.

102 0x00000066 ERROR_SEM_IS_SET The semaphore is set and cannot be closed.

103 0x00000067 ERROR_TOO_MANY_SEM_REQUESTS The semaphore cannot be set again.

104 0x00000068 ERROR_INVALID_AT_INTERRUPT_TIME Cannot request exclusive semaphores at interrupt

time.

105 0x00000069 ERROR_SEM_OWNER_DIED The previous ownership of this semaphore has

ended.

106 0x0000006A ERROR_SEM_USER_LIMIT Insert the diskette for drive %1.

107 0x0000006B ERROR_DISK_CHANGE The program stopped because an alternate

diskette was not inserted.

108 0x0000006C ERROR_DRIVE_LOCKED The disk is in use or locked by another process.

109 0x0000006D ERROR_BROKEN_PIPE The pipe has been ended.

110 0x0000006E ERROR_OPEN_FAILED The system cannot open the device or file

specified.

111 0x0000006F ERROR_BUFFER_OVERFLOW The file name is too long.

112 0x00000070 ERROR_DISK_FULL There is not enough space on the disk.

113 0x00000071 ERROR_NO_MORE_SEARCH_HANDLES No more internal file identifiers available.

114 0x00000072 ERROR_INVALID_TARGET_HANDLE The target internal file identifier is incorrect.

117 0x00000075 ERROR_INVALID_CATEGORY The IOCTL call made by the application program

is not correct.

118 0x00000076 ERROR_INVALID_VERIFY_SWITCH The verify-on-write switch parameter value is not

correct.

119 0x00000077 ERROR_BAD_DRIVER_LEVEL The system does not support the command

requested.

120 0x00000078 ERROR_CALL_NOT_IMPLEMENTED This function is not supported on this system.

121 0x00000079 ERROR_SEM_TIMEOUT The semaphore timeout period has expired.

122 0x0000007A ERROR_INSUFFICIENT_BUFFER The data area passed to a system call is too

small.

123 0x0000007B ERROR_INVALID_NAME The filename, directory name, or volume label

syntax is incorrect.

124 0x0000007C ERROR_INVALID_LEVEL The system call level is not correct.

125 0x0000007D ERROR_NO_VOLUME_LABEL The disk has no volume label.

126 0x0000007E ERROR_MOD_NOT_FOUND The specified module could not be found.

127 0x0000007F ERROR_PROC_NOT_FOUND The specified procedure could not be found.

128 0x00000080 ERROR_WAIT_NO_CHILDREN There are no child processes to wait for.

129 0x00000081 ERROR_CHILD_NOT_COMPLETE The %1 application cannot be run in Win32 mode.

130 0x00000082 ERROR_DIRECT_ACCESS_HANDLE Attempt to use a file handle to an open disk

partition for an operation other than raw disk I/O.

131 0x00000083 ERROR_NEGATIVE_SEEK An attempt was made to move the file pointer

before the beginning of the file.

132 0x00000084 ERROR_SEEK_ON_DEVICE The file pointer cannot be set on the specified

device or file.

133 0x00000085 ERROR_IS_JOIN_TARGET A JOIN or SUBST command cannot be used for a

drive that contains previously joined drives.

134 0x00000086 ERROR_IS_JOINED An attempt was made to use a JOIN or SUBST

command on a drive that has already been joined.

135 0x00000087 ERROR_IS_SUBSTED An attempt was made to use a JOIN or SUBST

command on a drive that has already been

substituted.

136 0x00000088 ERROR_NOT_JOINED The system tried to delete the JOIN of a drive that

is not joined.

137 0x00000089 ERROR_NOT_SUBSTED The system tried to delete the substitution of a

drive that is not substituted.

138 0x0000008A ERROR_JOIN_TO_JOIN The system tried to join a drive to a directory on a

joined drive.

139 0x0000008B ERROR_SUBST_TO_SUBST The system tried to substitute a drive to a

directory on a substituted drive.

140 0x0000008C ERROR_JOIN_TO_SUBST The system tried to join a drive to a directory on a

substituted drive.

141 0x0000008D ERROR_SUBST_TO_JOIN The system tried to SUBST a drive to a directory

on a joined drive.

Appendix

Beckhoff Device Manager92 Version: 4.9

Error Description

decimal Hexadecimal Name

142 0x0000008E ERROR_BUSY_DRIVE The system cannot perform a JOIN or SUBST at

this time.

143 0x0000008F ERROR_SAME_DRIVE The system cannot join or substitute a drive to or

for a directory on the same drive.

144 0x00000090 ERROR_DIR_NOT_ROOT The directory is not a subdirectory of the root

directory.

145 0x00000091 ERROR_DIR_NOT_EMPTY The directory is not empty.

146 0x00000092 ERROR_IS_SUBST_PATH The path specified is being used in a substitute.

147 0x00000093 ERROR_IS_JOIN_PATH Not enough resources are available to process

this command.

148 0x00000094 ERROR_PATH_BUSY The path specified cannot be used at this time.

149 0x00000095 ERROR_IS_SUBST_TARGET An attempt was made to join or substitute a drive

for which a directory on the drive is the target of a

previous substitute.

150 0x00000096 ERROR_SYSTEM_TRACE System trace information was not specified in

your CONFIG.SYS file, or tracing is disallowed.

151 0x00000097 ERROR_INVALID_EVENT_COUNT The number of specified semaphore events for

DosMuxSemWait is not correct.

152 0x00000098 ERROR_TOO_MANY_MUXWAITERS DosMuxSemWait did not execute; too many

semaphores are already set.

153 0x00000099 ERROR_INVALID_LIST_FORMAT The DosMuxSemWait list is not correct.

154 0x0000009A ERROR_LABEL_TOO_LONG The volume label you entered exceeds the label

character limit of the target file system.

155 0x0000009B ERROR_TOO_MANY_TCBS Cannot create another thread.

156 0x0000009C ERROR_SIGNAL_REFUSED The recipient process has refused the signal.

157 0x0000009D ERROR_DISCARDED The segment is already discarded and cannot be

locked.

158 0x0000009E ERROR_NOT_LOCKED The segment is already unlocked.

159 0x0000009F ERROR_BAD_THREADID_ADDR The address for the thread ID is not correct.

160 0x000000A0 ERROR_BAD_ARGUMENTS The argument string passed to DosExecPgm is

not correct.

161 0x000000A1 ERROR_BAD_PATHNAME The specified path is invalid.

162 0x000000A2 ERROR_SIGNAL_PENDING A signal is already pending.

164 0x000000A4 ERROR_MAX_THRDS_REACHED No more threads can be created in the system.

167 0x000000A7 ERROR_LOCK_FAILED Unable to lock a region of a file.

170 0x000000AA ERROR_BUSY The requested resource is in use.

173 0x000000AD ERROR_CANCEL_VIOLATION A lock request was not outstanding for the

supplied cancel region.

174 0x000000AE ERROR_ATOMIC_LOCKS_NOT_SUPPORTED The file system does not support atomic changes

to the lock type.

180 0x000000B4 ERROR_INVALID_SEGMENT_NUMBER The system detected a segment number that was

not correct.

182 0x000000B6 ERROR_INVALID_ORDINAL The operating system cannot run %1.

183 0x000000B7 ERROR_ALREADY_EXISTS Cannot create a file when that file already exists.

186 0x000000BA ERROR_INVALID_FLAG_NUMBER The flag passed is not correct.

187 0x000000BB ERROR_SEM_NOT_FOUND The specified system semaphore name was not

found.

188 0x000000BC ERROR_INVALID_STARTING_CODESEG The operating system cannot run %1.

189 0x000000BD ERROR_INVALID_STACKSEG The operating system cannot run %1.

190 0x000000BE ERROR_INVALID_MODULETYPE The operating system cannot run %1.

191 0x000000BF ERROR_INVALID_EXE_SIGNATURE Cannot run %1 in Win32 mode.

192 0x000000C0 ERROR_EXE_MARKED_INVALID The operating system cannot run %1.

193 0x000000C1 ERROR_BAD_EXE_FORMAT %1 is not a valid Win32 application.

194 0x000000C2 ERROR_ITERATED_DATA_EXCEEDS_64k The operating system cannot run %1.

195 0x000000C3 ERROR_INVALID_MINALLOCSIZE The operating system cannot run %1.

196 0x000000C4 ERROR_DYNLINK_FROM_INVALID_RING The operating system cannot run this application

program.

197 0x000000C5 ERROR_IOPL_NOT_ENABLED The operating system is not presently configured

to run this application.

198 0x000000C6 ERROR_INVALID_SEGDPL The operating system cannot run %1.

199 0x000000C7 ERROR_AUTODATASEG_EXCEEDS_64k The operating system cannot run this application

program.

Appendix

Beckhoff Device Manager 93Version: 4.9

Error Description

decimal Hexadecimal Name

200 0x000000C8 ERROR_RING2SEG_MUST_BE_MOVABLE The code segment cannot be greater than or

equal to 64K.

201 0x000000C9 ERROR_RELOC_CHAIN_XEEDS_SEGLIM The operating system cannot run %1.

202 0x000000CA ERROR_INFLOOP_IN_RELOC_CHAIN The operating system cannot run %1.

203 0x000000CB ERROR_ENVVAR_NOT_FOUND The system could not find the environment option

that was entered.

205 0x000000CD ERROR_NO_SIGNAL_SENT No process in the command subtree has a signal

handler.

206 0x000000CE ERROR_FILENAME_EXCED_RANGE The filename or extension is too long.

207 0x000000CF ERROR_RING2_STACK_IN_USE The ring 2 stack is in use.

208 0x000000D0 ERROR_META_EXPANSION_TOO_LONG The global filename characters, * or ?, are

entered incorrectly or too many global filename

characters are specified.

209 0x000000D1 ERROR_INVALID_SIGNAL_NUMBER The signal being posted is not correct.

210 0x000000D2 ERROR_THREAD_1_INACTIVE The signal handler cannot be set.

212 0x000000D4 ERROR_LOCKED The segment is locked and cannot be reallocated.

214 0x000000D6 ERROR_TOO_MANY_MODULES Too many dynamic-link modules are attached to

this program or dynamic-link module.

215 0x000000D7 ERROR_NESTING_NOT_ALLOWED Cannot nest calls to LoadModule.

216 0x000000D8 ERROR_EXE_MACHINE_TYPE_MISMATCH The image file %1 is valid, but is for a machine

type other than the current machine.

230 0x000000E6 ERROR_BAD_PIPE The pipe state is invalid.

231 0x000000E7 ERROR_PIPE_BUSY All pipe instances are busy.

232 0x000000E8 ERROR_NO_DATA The pipe is being closed.

233 0x000000E9 ERROR_PIPE_NOT_CONNECTED No process is on the other end of the pipe.

234 0x000000EA ERROR_MORE_DATA More data is available.

240 0x000000F0 ERROR_VC_DISCONNECTED The session was canceled.

254 0x000000FE ERROR_INVALID_EA_NAME The specified extended attribute name was

invalid.

255 0x000000FF ERROR_EA_LIST_INCONSISTENT The extended attributes are inconsistent.

258 0x00000102 WAIT_TIMEOUT The wait operation timed out.

259 0x00000103 ERROR_NO_MORE_ITEMS No more data is available.

266 0x0000010A ERROR_CANNOT_COPY The copy functions cannot be used.

267 0x0000010B ERROR_DIRECTORY The directory name is invalid.

275 0x00000113 ERROR_EAS_DIDNT_FIT The extended attributes did not fit in the buffer.

276 0x00000114 ERROR_EA_FILE_CORRUPT The extended attribute file on the mounted file

system is corrupt.

277 0x00000115 ERROR_EA_TABLE_FULL The extended attribute table file is full.

278 0x00000116 ERROR_INVALID_EA_HANDLE The specified extended attribute handle is invalid.

282 0x0000011A ERROR_EAS_NOT_SUPPORTED The mounted file system does not support

extended attributes.

288 0x00000120 ERROR_NOT_OWNER Attempt to release mutex not owned by caller.

298 0x0000012A ERROR_TOO_MANY_POSTS Too many posts were made to a semaphore.

299 0x0000012B ERROR_PARTIAL_COPY Only part of a ReadProcessMemory or

WriteProcessMemory request was completed.

300 0x0000012C ERROR_OPLOCK_NOT_GRANTED The oplock request is denied.

301 0x0000012D ERROR_INVALID_OPLOCK_PROTOCOL An invalid oplock acknowledgment was received

by the system.

302 0x0000012E ERROR_DISK_TOO_FRAGMENTED The volume is too fragmented to complete this

operation.

303 0x0000012F ERROR_DELETE_PENDING The file cannot be opened because it is in the

process of being deleted.

317 0x0000013D ERROR_MR_MID_NOT_FOUND The system cannot find message text for

message number 0x%1 in the message file for

%2.

487 0x000001E7 ERROR_INVALID_ADDRESS Attempt to access invalid address.

534 0x00000216 ERROR_ARITHMETIC_OVERFLOW Arithmetic result exceeded 32 bits.

535 0x00000217 ERROR_PIPE_CONNECTED There is a process on other end of the pipe.

536 0x00000218 ERROR_PIPE_LISTENING Waiting for a process to open the other end of the

pipe.

994 0x000003E2 ERROR_EA_ACCESS_DENIED Access to the extended attribute was denied.

Appendix

Beckhoff Device Manager94 Version: 4.9

Error Description

decimal Hexadecimal Name

995 0x000003E3 ERROR_OPERATION_ABORTED The I/O operation has been aborted because of

either a thread exit or an application request.

996 0x000003E4 ERROR_IO_INCOMPLETE Overlapped I/O event is not in a signaled state.

997 0x000003E5 ERROR_IO_PENDING Overlapped I/O operation is in progress.

998 0x000003E6 ERROR_NOACCESS Invalid access to memory location.

999 0x000003E7 ERROR_SWAPERROR Error performing inpage operation.

Appendix

Beckhoff Device Manager 95Version: 4.9

Error Description

decimal Hexadecimal Name

1001 0x000003E9 ERROR_STACK_OVERFLOW Recursion too deep; the stack overflowed.

1002 0x000003EA ERROR_INVALID_MESSAGE The window cannot act on the sent message.

1003 0x000003EB ERROR_CAN_NOT_COMPLETE Cannot complete this function.

1004 0x000003EC ERROR_INVALID_FLAGS Invalid flags.

1005 0x000003ED ERROR_UNRECOGNIZED_VOLUME The volume does not contain a recognized file

system. Please make sure that all required file

system drivers are loaded and that the volume is

not corrupted.

1006 0x000003EE ERROR_FILE_INVALID The volume for a file has been externally altered

so that the opened file is no longer valid.

1007 0x000003EF ERROR_FULLSCREEN_MODE The requested operation cannot be performed in

full-screen mode.

1008 0x000003F0 ERROR_NO_TOKEN An attempt was made to reference a token that

does not exist.

1009 0x000003F1 ERROR_BADDB The configuration registry database is corrupt.

1010 0x000003F2 ERROR_BADKEY The configuration registry key is invalid.

1011 0x000003F3 ERROR_CANTOPEN The configuration registry key could not be

opened.

1012 0x000003F4 ERROR_CANTREAD The configuration registry key could not be read.

1013 0x000003F5 ERROR_CANTWRITE The configuration registry key could not be

written.

1014 0x000003F6 ERROR_REGISTRY_RECOVERED One of the files in the registry database had to be

recovered by use of a log or alternate copy. The

recovery was successful.

1015 0x000003F7 ERROR_REGISTRY_CORRUPT The registry is corrupted. The structure of one of

the files containing registry data is corrupted, or

the system's memory image of the file is

corrupted, or the file could not be recovered

because the alternate copy or log was absent or

corrupted.

1016 0x000003F8 ERROR_REGISTRY_IO_FAILED An I/O operation initiated by the registry failed

unrecoverably. The registry could not read in, or

write out, or flush, one of the files that contain the

system's image of the registry.

1017 0x000003F9 ERROR_NOT_REGISTRY_FILE The system has attempted to load or restore a file

into the registry, but the specified file is not in a

registry file format.

1018 0x000003FA ERROR_KEY_DELETED Illegal operation attempted on a registry key that

has been marked for deletion.

1019 0x000003FB ERROR_NO_LOG_SPACE System could not allocate the required space in a

registry log.

1020 0x000003FC ERROR_KEY_HAS_CHILDREN Cannot create a symbolic link in a registry key

that already has subkeys or values.

1021 0x000003FD ERROR_CHILD_MUST_BE_VOLATILE Cannot create a stable subkey under a volatile

parent key.

1022 0x000003FE ERROR_NOTIFY_ENUM_DIR A notify change request is being completed and

the information is not being returned in the caller's

buffer. The caller now needs to enumerate the

files to find the changes.

1051 0x0000041B ERROR_DEPENDENT_SERVICES_RUNNING A stop control has been sent to a service that

other running services are dependent on.

1052 0x0000041C ERROR_INVALID_SERVICE_CONTROL The requested control is not valid for this service.

1053 0x0000041D ERROR_SERVICE_REQUEST_TIMEOUT The service did not respond to the start or control

request in a timely fashion.

1054 0x0000041E ERROR_SERVICE_NO_THREAD A thread could not be created for the service.

1055 0x0000041F ERROR_SERVICE_DATABASE_LOCKED The service database is locked.

1056 0x00000420 ERROR_SERVICE_ALREADY_RUNNING An instance of the service is already running.

1057 0x00000421 ERROR_INVALID_SERVICE_ACCOUNT The account name is invalid or does not exist, or

the password is invalid for the account name

specified.

1058 0x00000422 ERROR_SERVICE_DISABLED The service cannot be started, either because it is

disabled or because it has no enabled devices

associated with it.

1059 0x00000423 ERROR_CIRCULAR_DEPENDENCY Circular service dependency was specified.

Appendix

Beckhoff Device Manager96 Version: 4.9

Error Description

decimal Hexadecimal Name

1060 0x00000424 ERROR_SERVICE_DOES_NOT_EXIST The specified service does not exist as an

installed service.

1061 0x00000425 ERROR_SERVICE_CANNOT_ACCEPT_CTRL The service cannot accept control messages at

this time.

1062 0x00000426 ERROR_SERVICE_NOT_ACTIVE The service has not been started.

1063 0x00000427 ERROR_FAILED_SERVICE_CONTROLLER_CON

NECT

The service process could not connect to the

service controller.

1064 0x00000428 ERROR_EXCEPTION_IN_SERVICE An exception occurred in the service when

handling the control request.

1065 0x00000429 ERROR_DATABASE_DOES_NOT_EXIST The database specified does not exist.

1066 0x0000042A ERROR_SERVICE_SPECIFIC_ERROR The service has returned a service-specific error

code.

1067 0x0000042B ERROR_PROCESS_ABORTED The process terminated unexpectedly.

1068 0x0000042C ERROR_SERVICE_DEPENDENCY_FAIL The dependency service or group failed to start.

1069 0x0000042D ERROR_SERVICE_LOGON_FAILED The service did not start due to a logon failure.

1070 0x0000042E ERROR_SERVICE_START_HANG After starting, the service hung in a start-pending

state.

1071 0x0000042F ERROR_INVALID_SERVICE_LOCK The specified service database lock is invalid.

1072 0x00000430 ERROR_SERVICE_MARKED_FOR_DELETE The specified service has been marked for

deletion.

1073 0x00000431 ERROR_SERVICE_EXISTS The specified service already exists.

1074 0x00000432 ERROR_ALREADY_RUNNING_LKG The system is currently running with the last-

known-good configuration.

1075 0x00000433 ERROR_SERVICE_DEPENDENCY_DELETED The dependency service does not exist or has

been marked for deletion.

1076 0x00000434 ERROR_BOOT_ALREADY_ACCEPTED The current boot has already been accepted for

use as the last-known-good control set.

1077 0x00000435 ERROR_SERVICE_NEVER_STARTED No attempts to start the service have been made

since the last boot.

1078 0x00000436 ERROR_DUPLICATE_SERVICE_NAME The name is already in use as either a service

name or a service display name.

1079 0x00000437 ERROR_DIFFERENT_SERVICE_ACCOUNT The account specified for this service is different

from the account specified for other services

running in the same process.

1080 0x00000438 ERROR_CANNOT_DETECT_DRIVER_FAILURE Failure actions can only be set for Win32

services, not for drivers.

1081 0x00000439 ERROR_CANNOT_DETECT_PROCESS_ABORT This service runs in the same process as the

service control manager. Therefore, the service

control manager cannot take action if this

service's process terminates unexpectedly.

1082 0x0000043A ERROR_NO_RECOVERY_PROGRAM No recovery program has been configured for this

service.

1083 0x0000043B ERROR_SERVICE_NOT_IN_EXE The executable program that this service is

configured to run in does not implement the

service.

1084 0x0000043C ERROR_NOT_SAFEBOOT_SERVICE This service cannot be started in Safe Mode.

Appendix

Beckhoff Device Manager 97Version: 4.9

Error Description

decimal Hexadecimal Name

1100 0x0000044C ERROR_END_OF_MEDIA The physical end of the tape has been reached.

1101 0x0000044D ERROR_FILEMARK_DETECTED A tape access reached a filemark.

1102 0x0000044E ERROR_BEGINNING_OF_MEDIA The beginning of the tape or a partition was

encountered.

1103 0x0000044F ERROR_SETMARK_DETECTED A tape access reached the end of a set of files.

1104 0x00000450 ERROR_NO_DATA_DETECTED No more data is on the tape.

1105 0x00000451 ERROR_PARTITION_FAILURE Tape could not be partitioned.

1106 0x00000452 ERROR_INVALID_BLOCK_LENGTH When accessing a new tape of a multivolume

partition, the current block size is incorrect.

1107 0x00000453 ERROR_DEVICE_NOT_PARTITIONED Tape partition information could not be found

when loading a tape.

1108 0x00000454 ERROR_UNABLE_TO_LOCK_MEDIA Unable to lock the media eject mechanism.

1109 0x00000455 ERROR_UNABLE_TO_UNLOAD_MEDIA Unable to unload the media.

1110 0x00000456 ERROR_MEDIA_CHANGED The media in the drive may have changed.

1111 0x00000457 ERROR_BUS_RESET The I/O bus was reset.

1112 0x00000458 ERROR_NO_MEDIA_IN_DRIVE No media in drive.

1113 0x00000459 ERROR_NO_UNICODE_TRANSLATION No mapping for the Unicode character exists in

the target multi-byte code page.

1114 0x0000045A ERROR_DLL_INIT_FAILED A dynamic link library (DLL) initialization routine

failed.

1115 0x0000045B ERROR_SHUTDOWN_IN_PROGRESS A system shutdown is in progress.

1116 0x0000045C ERROR_NO_SHUTDOWN_IN_PROGRESS Unable to abort the system shutdown because no

shutdown was in progress.

1117 0x0000045D ERROR_IO_DEVICE The request could not be performed because of

an I/O device error.

1118 0x0000045E ERROR_SERIAL_NO_DEVICE No serial device was successfully initialized. The

serial driver will unload.

1119 0x0000045F ERROR_IRQ_BUSY Unable to open a device that was sharing an

interrupt request (IRQ) with other devices. At least

one other device that uses that IRQ was already

opened.

1120 0x00000460 ERROR_MORE_WRITES A serial I/O operation was completed by another

write to the serial port. (The

IOCTL_SERIAL_XOFF_COUNTER reached

zero.)

1121 0x00000461 ERROR_COUNTER_TIMEOUT A serial I/O operation completed because the

timeout period expired. (The

IOCTL_SERIAL_XOFF_COUNTER did not reach

zero.)

1122 0x00000462 ERROR_FLOPPY_ID_MARK_NOT_FOUND No ID address mark was found on the floppy disk.

1123 0x00000463 ERROR_FLOPPY_WRONG_CYLINDER Mismatch between the floppy disk sector ID field

and the floppy disk controller track address.

1124 0x00000464 ERROR_FLOPPY_UNKNOWN_ERROR The floppy disk controller reported an error that is

not recognized by the floppy disk driver.

1125 0x00000465 ERROR_FLOPPY_BAD_REGISTERS The floppy disk controller returned inconsistent

results in its registers.

1126 0x00000466 ERROR_DISK_RECALIBRATE_FAILED While accessing the hard disk, a recalibrate

operation failed, even after retries.

1127 0x00000467 ERROR_DISK_OPERATION_FAILED While accessing the hard disk, a disk operation

failed even after retries.

1128 0x00000468 ERROR_DISK_RESET_FAILED While accessing the hard disk, a disk controller

reset was needed, but even that failed.

1129 0x00000469 ERROR_EOM_OVERFLOW Physical end of tape encountered.

1130 0x0000046A ERROR_NOT_ENOUGH_SERVER_MEMORY Not enough server storage is available to process

this command.

1131 0x0000046B ERROR_POSSIBLE_DEADLOCK A potential deadlock condition has been detected.

1132 0x0000046C ERROR_MAPPED_ALIGNMENT The base address or the file offset specified does

not have the proper alignment.

1140 0x00000474 ERROR_SET_POWER_STATE_VETOED An attempt to change the system power state was

vetoed by another application or driver.

1141 0x00000475 ERROR_SET_POWER_STATE_FAILED The system BIOS failed an attempt to change the

system power state.

1142 0x00000476 ERROR_TOO_MANY_LINKS An attempt was made to create more links on a

file than the file system supports.

Appendix

Beckhoff Device Manager98 Version: 4.9

Error Description

decimal Hexadecimal Name

1150 0x0000047E ERROR_OLD_WIN_VERSION The specified program requires a newer version

of Windows.

1151 0x0000047F ERROR_APP_WRONG_OS The specified program is not a Windows or MS-

DOS program.

1152 0x00000480 ERROR_SINGLE_INSTANCE_APP Cannot start more than one instance of the

specified program.

1153 0x00000481 ERROR_RMODE_APP The specified program was written for an earlier

version of Windows.

1154 0x00000482 ERROR_INVALID_DLL One of the library files needed to run this

application is damaged.

1155 0x00000483 ERROR_NO_ASSOCIATION No application is associated with the specified file

for this operation.

1156 0x00000484 ERROR_DDE_FAIL An error occurred in sending the command to the

application.

1157 0x00000485 ERROR_DLL_NOT_FOUND One of the library files needed to run this

application cannot be found.

1158 0x00000486 ERROR_NO_MORE_USER_HANDLES The current process has used all of its system

allowance of handles for Window Manager

objects.

1159 0x00000487 ERROR_MESSAGE_SYNC_ONLY The message can be used only with synchronous

operations.

1160 0x00000488 ERROR_SOURCE_ELEMENT_EMPTY The indicated source element has no media.

1161 0x00000489 ERROR_DESTINATION_ELEMENT_FULL The indicated destination element already

contains media.

1162 0x0000048A ERROR_ILLEGAL_ELEMENT_ADDRESS The indicated element does not exist.

1163 0x0000048B ERROR_MAGAZINE_NOT_PRESENT The indicated element is part of a magazine that

is not present.

1164 0x0000048C ERROR_DEVICE_REINITIALIZATION_NEEDED The indicated device requires reinitialization due

to hardware errors.

1165 0x0000048D ERROR_DEVICE_REQUIRES_CLEANING The device has indicated that cleaning is required

before further operations are attempted.

1166 0x0000048E ERROR_DEVICE_DOOR_OPEN The device has indicated that its door is open.

1167 0x0000048F ERROR_DEVICE_NOT_CONNECTED The device is not connected.

1168 0x00000490 ERROR_NOT_FOUND Element not found.

1169 0x00000491 ERROR_NO_MATCH There was no match for the specified key in the

index.

1170 0x00000492 ERROR_SET_NOT_FOUND The property set specified does not exist on the

object.

1171 0x00000493 ERROR_POINT_NOT_FOUND The point passed to GetMouseMovePointsEx is

not in the buffer.

1172 0x00000494 ERROR_NO_TRACKING_SERVICE The tracking (workstation) service is not running.

1173 0x00000495 ERROR_NO_VOLUME_ID The Volume ID could not be found.

1175 0x00000497 ERROR_UNABLE_TO_REMOVE_REPLACED Unable to remove the file to be replaced.

1176 0x00000498 ERROR_UNABLE_TO_MOVE_REPLACEMENT Unable to move the replacement file to the file to

be replaced. The file to be replaced has retained

its original name.

1177 0x00000499 ERROR_UNABLE_TO_MOVE_REPLACEMENT_2 Unable to move the replacement file to the file to

be replaced. The file to be replaced has been

renamed using the backup name.

1178 0x0000049A ERROR_JOURNAL_DELETE_IN_PROGRESS The volume change journal is being deleted.

1179 0x0000049B ERROR_JOURNAL_NOT_ACTIVE The volume change journal is not active.

1180 0x0000049C ERROR_POTENTIAL_FILE_FOUND A file was found, but it may not be the correct file.

1181 0x0000049D ERROR_JOURNAL_ENTRY_DELETED The journal entry has been deleted from the

journal.

Appendix

Beckhoff Device Manager 99Version: 4.9

Error Description

decimal Hexadecimal Name

1200 0x000004B0 ERROR_BAD_DEVICE The specified device name is invalid.

1201 0x000004B1 ERROR_CONNECTION_UNAVAIL The device is not currently connected but it is a

remembered connection.

1202 0x000004B2 ERROR_DEVICE_ALREADY_REMEMBERED The local device name has a remembered

connection to another network resource.

1203 0x000004B3 ERROR_NO_NET_OR_BAD_PATH No network provider accepted the given network

path.

1204 0x000004B4 ERROR_BAD_PROVIDER The specified network provider name is invalid.

1205 0x000004B5 ERROR_CANNOT_OPEN_PROFILE Unable to open the network connection profile.

1206 0x000004B6 ERROR_BAD_PROFILE The network connection profile is corrupted.

1207 0x000004B7 ERROR_NOT_CONTAINER Cannot enumerate a noncontainer.

1208 0x000004B8 ERROR_EXTENDED_ERROR An extended error has occurred.

1209 0x000004B9 ERROR_INVALID_GROUPNAME The format of the specified group name is invalid.

1210 0x000004BA ERROR_INVALID_COMPUTERNAME The format of the specified computer name is

invalid.

1211 0x000004BB ERROR_INVALID_EVENTNAME The format of the specified event name is invalid.

1212 0x000004BC ERROR_INVALID_DOMAINNAME The format of the specified domain name is

invalid.

1213 0x000004BD ERROR_INVALID_SERVICENAME The format of the specified service name is

invalid.

1214 0x000004BE ERROR_INVALID_NETNAME The format of the specified network name is

invalid.

1215 0x000004BF ERROR_INVALID_SHARENAME The format of the specified share name is invalid.

1216 0x000004C0 ERROR_INVALID_PASSWORDNAME The format of the specified password is invalid.

1217 0x000004C1 ERROR_INVALID_MESSAGENAME The format of the specified message name is

invalid.

1218 0x000004C2 ERROR_INVALID_MESSAGEDEST The format of the specified message destination

is invalid.

1219 0x000004C3 ERROR_SESSION_CREDENTIAL_CONFLICT The credentials supplied conflict with an existing

set of credentials.

1220 0x000004C4 ERROR_REMOTE_SESSION_LIMIT_EXCEEDED An attempt was made to establish a session to a

network server, but there are already too many

sessions established to that server.

1221 0x000004C5 ERROR_DUP_DOMAINNAME The workgroup or domain name is already in use

by another computer on the network.

1222 0x000004C6 ERROR_NO_NETWORK The network is not present or not started.

1223 0x000004C7 ERROR_CANCELLED The operation was canceled by the user.

1224 0x000004C8 ERROR_USER_MAPPED_FILE The requested operation cannot be performed on

a file with a user-mapped section open.

1225 0x000004C9 ERROR_CONNECTION_REFUSED The remote system refused the network

connection.

1226 0x000004CA ERROR_GRACEFUL_DISCONNECT The network connection was gracefully closed.

1227 0x000004CB ERROR_ADDRESS_ALREADY_ASSOCIATED The network transport endpoint already has an

address associated with it.

1228 0x000004CC ERROR_ADDRESS_NOT_ASSOCIATED An address has not yet been associated with the

network endpoint.

1229 0x000004CD ERROR_CONNECTION_INVALID An operation was attempted on a nonexistent

network connection.

1230 0x000004CE ERROR_CONNECTION_ACTIVE An invalid operation was attempted on an active

network connection.

1231 0x000004CF ERROR_NETWORK_UNREACHABLE The network location cannot be reached. For

information about network troubleshooting, see

Windows Help.

1232 0x000004D0 ERROR_HOST_UNREACHABLE The network location cannot be reached. For

information about network troubleshooting, see

Windows Help.

1233 0x000004D1 ERROR_PROTOCOL_UNREACHABLE The network location cannot be reached. For

information about network troubleshooting, see

Windows Help.

1234 0x000004D2 ERROR_PORT_UNREACHABLE No service is operating at the destination network

endpoint on the remote system.

1235 0x000004D3 ERROR_REQUEST_ABORTED The request was aborted.

1236 0x000004D4 ERROR_CONNECTION_ABORTED The network connection was aborted by the local

system.

Appendix

Beckhoff Device Manager100 Version: 4.9

Error Description

decimal Hexadecimal Name

1237 0x000004D5 ERROR_RETRY The operation could not be completed. A retry

should be performed.

1238 0x000004D6 ERROR_CONNECTION_COUNT_LIMIT A connection to the server could not be made

because the limit on the number of concurrent

connections for this account has been reached.

1239 0x000004D7 ERROR_LOGIN_TIME_RESTRICTION Attempting to log in during an unauthorized time

of day for this account.

1240 0x000004D8 ERROR_LOGIN_WKSTA_RESTRICTION The account is not authorized to log in from this

station.

1241 0x000004D9 ERROR_INCORRECT_ADDRESS The network address could not be used for the

operation requested.

1242 0x000004DA ERROR_ALREADY_REGISTERED The service is already registered.

1243 0x000004DB ERROR_SERVICE_NOT_FOUND The specified service does not exist.

1244 0x000004DC ERROR_NOT_AUTHENTICATED The operation being requested was not performed

because the user has not been authenticated.

1245 0x000004DD ERROR_NOT_LOGGED_ON The operation being requested was not performed

because the user has not logged on to the

network. The specified service does not exist.

1246 0x000004DE ERROR_CONTINUE Continue with work in progress.

1247 0x000004DF ERROR_ALREADY_INITIALIZED An attempt was made to perform an initialization

operation when initialization has already been

completed.

1248 0x000004E0 ERROR_NO_MORE_DEVICES No more local devices.

1249 0x000004E1 ERROR_NO_SUCH_SITE The specified site does not exist.

1250 0x000004E2 ERROR_DOMAIN_CONTROLLER_EXISTS A domain controller with the specified name

already exists.

1251 0x000004E3 ERROR_ONLY_IF_CONNECTED This operation is supported only when you are

connected to the server.

1252 0x000004E4 ERROR_OVERRIDE_NOCHANGES The group policy framework should call the

extension even if there are no changes.

1253 0x000004E5 ERROR_BAD_USER_PROFILE The specified user does not have a valid profile.

1254 0x000004E6 ERROR_NOT_SUPPORTED_ON_SBS This operation is not supported on a Microsoft

Small Business Server.

1255 0x000004E7 ERROR_SERVER_SHUTDOWN_IN_PROGRESS The server machine is shutting down.

1256 0x000004E8 ERROR_HOST_DOWN The remote system is not available. For

information about network troubleshooting, see

Windows Help.

1257 0x000004E9 ERROR_NON_ACCOUNT_SID The security identifier provided is not from an

account domain.

1258 0x000004EA ERROR_NON_DOMAIN_SID The security identifier provided does not have a

domain component.

1259 0x000004EB ERROR_APPHELP_BLOCK AppHelp dialog canceled thus preventing the

application from starting.

1260 0x000004EC ERROR_ACCESS_DISABLED_BY_POLICY Access to the requested resource has been

disabled by your administrator.

1261 0x000004ED ERROR_REG_NAT_CONSUMPTION A program attempt to use an invalid register

value. Normally caused by an uninitialized

1262 0x000004EE ERROR_CSCSHARE_OFFLINE The share is currently offline or does not exist.

1300 0x00000514 ERROR_NOT_ALL_ASSIGNED Not all privileges referenced are assigned to the

caller.

1301 0x00000515 ERROR_SOME_NOT_MAPPED Some mapping between account names and

security IDs was not done.

1302 0x00000516 ERROR_NO_QUOTAS_FOR_ACCOUNT No system quota limits are specifically set for this

account.

1303 0x00000517 ERROR_LOCAL_USER_SESSION_KEY No encryption key is available. A well-known

encryption key was returned.

1304 0x00000518 ERROR_NULL_LM_PASSWORD The password is too complex to be converted to a

LAN Manager password. The LAN Manager

password returned is a NULL string.

1305 0x00000519 ERROR_UNKNOWN_REVISION The revision level is unknown.

1306 0x0000051A ERROR_REVISION_MISMATCH Indicates two revision levels are incompatible.

1307 0x0000051B ERROR_INVALID_OWNER This security ID may not be assigned as the

owner of this object.

Appendix

Beckhoff Device Manager 101Version: 4.9

Error Description

decimal Hexadecimal Name

1308 0x0000051C ERROR_INVALID_PRIMARY_GROUP This security ID may not be assigned as the

primary group of an object.

1309 0x0000051D ERROR_NO_IMPERSONATION_TOKEN An attempt has been made to operate on an

impersonation token by a thread that is not

currently impersonating a client.

1310 0x0000051E ERROR_CANT_DISABLE_MANDATORY The group may not be disabled.

1311 0x0000051F ERROR_NO_LOGON_SERVERS There are currently no logon servers available to

service the logon request.

1312 0x00000520 ERROR_NO_SUCH_LOGON_SESSION A specified logon session does not exist. It may

already have been terminated.

1313 0x00000521 ERROR_NO_SUCH_PRIVILEGE A specified privilege does not exist.

1314 0x00000522 ERROR_PRIVILEGE_NOT_HELD A required privilege is not held by the client.

1315 0x00000523 ERROR_INVALID_ACCOUNT_NAME The name provided is not a properly formed

account name.

1316 0x00000524 ERROR_USER_EXISTS The specified user already exists.

1317 0x00000525 ERROR_NO_SUCH_USER The specified user does not exist.

1318 0x00000526 ERROR_GROUP_EXISTS The specified group already exists.

1319 0x00000527 ERROR_NO_SUCH_GROUP The specified group does not exist.

1320 0x00000528 ERROR_MEMBER_IN_GROUP Either the specified user account is already a

member of the specified group, or the specified

group cannot be deleted because it contains a

member.

1321 0x00000529 ERROR_MEMBER_NOT_IN_GROUP The specified user account is not a member of the

specified group account.

1322 0x0000052A ERROR_LAST_ADMIN The last remaining administration account cannot

be disabled or deleted.

1323 0x0000052B ERROR_WRONG_PASSWORD Unable to update the password. The value

provided as the current password is incorrect.

1324 0x0000052C ERROR_ILL_FORMED_PASSWORD Unable to update the password. The value

provided for the new password contains values

that are not allowed in passwords.

1325 0x0000052D ERROR_PASSWORD_RESTRICTION Unable to update the password. The value

provided for the new password does not meet the

length, complexity, or history requirement of the

domain.

1326 0x0000052E ERROR_LOGON_FAILURE Logon failure: unknown user name or bad

password.

1327 0x0000052F ERROR_ACCOUNT_RESTRICTION Logon failure: user account restriction.

1328 0x00000530 ERROR_INVALID_LOGON_HOURS Logon failure: account logon time restriction

violation.

1329 0x00000531 ERROR_INVALID_WORKSTATION Logon failure: user not allowed to log on to this

computer.

1330 0x00000532 ERROR_PASSWORD_EXPIRED Logon failure: the specified account password has

expired.

1331 0x00000533 ERROR_ACCOUNT_DISABLED Logon failure: account currently disabled.

1332 0x00000534 ERROR_NONE_MAPPED No mapping between account names and security

IDs was done.

1333 0x00000535 ERROR_TOO_MANY_LUIDS_REQUESTED Too many local user identifiers (LUIDs) were

requested at one time.

1334 0x00000536 ERROR_LUIDS_EXHAUSTED No more local user identifiers (LUIDs) are

available.

1335 0x00000537 ERROR_INVALID_SUB_AUTHORITY The subauthority part of a security ID is invalid for

this particular use.

1336 0x00000538 ERROR_INVALID_ACL The access control list (ACL) structure is invalid.

1337 0x00000539 ERROR_INVALID_SID The security ID structure is invalid.

1338 0x0000053A ERROR_INVALID_SECURITY_DESCR The security descriptor structure is invalid.

1340 0x0000053C ERROR_BAD_INHERITANCE_ACL The inherited access control list (ACL) or access

control entry (ACE) could not be built.

1341 0x0000053D ERROR_SERVER_DISABLED The server is currently disabled.

1342 0x0000053E ERROR_SERVER_NOT_DISABLED The server is currently enabled.

1343 0x0000053F ERROR_INVALID_ID_AUTHORITY The value provided was an invalid value for an

identifier authority.

1344 0x00000540 ERROR_ALLOTTED_SPACE_EXCEEDED No more memory is available for security

information updates.

Appendix

Beckhoff Device Manager102 Version: 4.9

Error Description

decimal Hexadecimal Name

1345 0x00000541 ERROR_INVALID_GROUP_ATTRIBUTES The specified attributes are invalid, or

incompatible with the attributes for the group as a

whole.

1346 0x00000542 ERROR_BAD_IMPERSONATION_LEVEL Either a required impersonation level was not

provided, or the provided impersonation level is

invalid.

1347 0x00000543 ERROR_CANT_OPEN_ANONYMOUS Cannot open an anonymous level security token.

1348 0x00000544 ERROR_BAD_VALIDATION_CLASS The validation information class requested was

invalid.

1349 0x00000545 ERROR_BAD_TOKEN_TYPE The type of the token is inappropriate for its

attempted use.

1350 0x00000546 ERROR_NO_SECURITY_ON_OBJECT Unable to perform a security operation on an

object that has no associated security.

1351 0x00000547 ERROR_CANT_ACCESS_DOMAIN_INFO Configuration information could not be read from

the domain controller, either because the machine

is unavailable, or access has been denied.

1352 0x00000548 ERROR_INVALID_SERVER_STATE The security account manager (SAM) or local

security authority (LSA) server was in the wrong

state to perform the security operation.

1353 0x00000549 ERROR_INVALID_DOMAIN_STATE The domain was in the wrong state to perform the

security operation.

1354 0x0000054A ERROR_INVALID_DOMAIN_ROLE This operation is only allowed for the Primary

Domain Controller of the domain.

1355 0x0000054B ERROR_NO_SUCH_DOMAIN The specified domain either does not exist or

could not be contacted.

1356 0x0000054C ERROR_DOMAIN_EXISTS The specified domain already exists.

1357 0x0000054D ERROR_DOMAIN_LIMIT_EXCEEDED An attempt was made to exceed the limit on the

number of domains per server.

1358 0x0000054E ERROR_INTERNAL_DB_CORRUPTION Unable to complete the requested operation

because of either a catastrophic media failure or a

data structure corruption on the disk.

1359 0x0000054F ERROR_INTERNAL_ERROR An internal error occurred.

1360 0x00000550 ERROR_GENERIC_NOT_MAPPED Generic access types were contained in an

access mask which should already be mapped to

nongeneric types.

1361 0x00000551 ERROR_BAD_DESCRIPTOR_FORMAT A security descriptor is not in the right format

(absolute or self-relative).

1362 0x00000552 ERROR_NOT_LOGON_PROCESS The requested action is restricted for use by logon

processes only. The calling process has not

registered as a logon process.

1363 0x00000553 ERROR_LOGON_SESSION_EXISTS Cannot start a new logon session with an ID that

is already in use.

1364 0x00000554 ERROR_NO_SUCH_PACKAGE A specified authentication package is unknown.

1365 0x00000555 ERROR_BAD_LOGON_SESSION_STATE The logon session is not in a state that is

consistent with the requested operation.

1366 0x00000556 ERROR_LOGON_SESSION_COLLISION The logon session ID is already in use.

1367 0x00000557 ERROR_INVALID_LOGON_TYPE A logon request contained an invalid logon type

value.

1368 0x00000558 ERROR_CANNOT_IMPERSONATE Unable to impersonate using a named pipe until

data has been read from that pipe.

1369 0x00000559 ERROR_RXACT_INVALID_STATE The transaction state of a registry subtree is

incompatible with the requested operation.

1370 0x0000055A ERROR_RXACT_COMMIT_FAILURE An internal security database corruption has been

encountered.

1371 0x0000055B ERROR_SPECIAL_ACCOUNT Cannot perform this operation on built-in

accounts.

1372 0x0000055C ERROR_SPECIAL_GROUP Cannot perform this operation on this built-in

special group.

1373 0x0000055D ERROR_SPECIAL_USER Cannot perform this operation on this built-in

special user.

1374 0x0000055E ERROR_MEMBERS_PRIMARY_GROUP The user cannot be removed from a group

because the group is currently the user's primary

group.

1375 0x0000055F ERROR_TOKEN_ALREADY_IN_USE The token is already in use as a primary token.

1376 0x00000560 ERROR_NO_SUCH_ALIAS The specified local group does not exist.

Appendix

Beckhoff Device Manager 103Version: 4.9

Error Description

decimal Hexadecimal Name

1377 0x00000561 ERROR_MEMBER_NOT_IN_ALIAS The specified account name is not a member of

the local group.

1378 0x00000562 ERROR_MEMBER_IN_ALIAS The specified account name is already a member

of the local group.

1379 0x00000563 ERROR_ALIAS_EXISTS The specified local group already exists.

1380 0x00000564 ERROR_LOGON_NOT_GRANTED Logon failure: the user has not been granted the

requested logon type at this computer.

1381 0x00000565 ERROR_TOO_MANY_SECRETS The maximum number of secrets that may be

stored in a single system has been exceeded.

1382 0x00000566 ERROR_SECRET_TOO_LONG The length of a secret exceeds the maximum

length allowed.

1383 0x00000567 ERROR_INTERNAL_DB_ERROR The local security authority database contains an

internal inconsistency.

1384 0x00000568 ERROR_TOO_MANY_CONTEXT_IDS During a logon attempt, the user's security

context accumulated too many security IDs.

1385 0x00000569 ERROR_LOGON_TYPE_NOT_GRANTED Logon failure: the user has not been granted the

requested logon type at this computer.

1386 0x0000056A ERROR_NT_CROSS_ENCRYPTION_REQUIRED A cross-encrypted password is necessary to

change a user password.

1387 0x0000056B ERROR_NO_SUCH_MEMBER A new member could not be added to or removed

from the local group because the member does

not exist.

1388 0x0000056C ERROR_INVALID_MEMBER A new member could not be added to a local

group because the member has the wrong

account type.

1389 0x0000056D ERROR_TOO_MANY_SIDS Too many security IDs have been specified.

1390 0x0000056E ERROR_LM_CROSS_ENCRYPTION_REQUIRED A cross-encrypted password is necessary to

change this user password.

1391 0x0000056F ERROR_NO_INHERITANCE Indicates an ACL contains no inheritable

components.

1392 0x00000570 ERROR_FILE_CORRUPT The file or directory is corrupted and unreadable.

1393 0x00000571 ERROR_DISK_CORRUPT The disk structure is corrupted and unreadable.

1394 0x00000572 ERROR_NO_USER_SESSION_KEY There is no user session key for the specified

logon session.

1395 0x00000573 ERROR_LICENSE_QUOTA_EXCEEDED The service being accessed is licensed for a

particular number of connections. No more

connections can be made to the service at this

time because there are already as many

connections as the service can accept.

1396 0x00000574 ERROR_WRONG_TARGET_NAME Logon Failure: The target account name is

incorrect.

1397 0x00000575 ERROR_MUTUAL_AUTH_FAILED Mutual Authentication failed. The server's

password is out of date at the domain controller.

1398 0x00000576 ERROR_TIME_SKEW There is a time difference between the client and

server.

1399 0x00000577 ERROR_CURRENT_DOMAIN_NOT_ALLOWED This operation can not be performed on the

current domain.

Appendix

Beckhoff Device Manager104 Version: 4.9

Error Description

decimal Hexadecimal Name

1400 0x00000578 ERROR_INVALID_WINDOW_HANDLE Invalid window handle.

1401 0x00000579 ERROR_INVALID_MENU_HANDLE Invalid menu handle.

1402 0x0000057A ERROR_INVALID_CURSOR_HANDLE Invalid cursor handle.

1403 0x0000057B ERROR_INVALID_ACCEL_HANDLE Invalid accelerator table handle.

1404 0x0000057C ERROR_INVALID_HOOK_HANDLE Invalid hook handle.

1405 0x0000057D ERROR_INVALID_DWP_HANDLE Invalid handle to a multiple-window position

structure.

1406 0x0000057E ERROR_TLW_WITH_WSCHILD Cannot create a top-level child window.

1407 0x0000057F ERROR_CANNOT_FIND_WND_CLASS Cannot find window class.

1408 0x00000580 ERROR_WINDOW_OF_OTHER_THREAD Invalid window; it belongs to other thread.

1409 0x00000581 ERROR_HOTKEY_ALREADY_REGISTERED Hot key is already registered.

1410 0x00000582 ERROR_CLASS_ALREADY_EXISTS Class already exists.

1411 0x00000583 ERROR_CLASS_DOES_NOT_EXIST Class does not exist.

1412 0x00000584 ERROR_CLASS_HAS_WINDOWS Class still has open windows.

1413 0x00000585 ERROR_INVALID_INDEX Invalid index.

1414 0x00000586 ERROR_INVALID_ICON_HANDLE Invalid icon handle.

1415 0x00000587 ERROR_PRIVATE_DIALOG_INDEX Using private DIALOG window words.

1416 0x00000588 ERROR_LISTBOX_ID_NOT_FOUND The list box identifier was not found.

1417 0x00000589 ERROR_NO_WILDCARD_CHARACTERS No wildcards were found.

1418 0x0000058A ERROR_CLIPBOARD_NOT_OPEN Thread does not have a clipboard open.

1419 0x0000058B ERROR_HOTKEY_NOT_REGISTERED Hot key is not registered.

1420 0x0000058C ERROR_WINDOW_NOT_DIALOG The window is not a valid dialog window.

1421 0x0000058D ERROR_CONTROL_ID_NOT_FOUND Control ID not found.

1422 0x0000058E ERROR_INVALID_COMBOBOX_MESSAGE Invalid message for a combo box because it does

not have an edit control.

1423 0x0000058F ERROR_WINDOW_NOT_COMBOBOX The window is not a combo box.

1424 0x00000590 ERROR_INVALID_EDIT_HEIGHT Height must be less than 256.

1425 0x00000591 ERROR_DC_NOT_FOUND Invalid device context (DC) handle.

1426 0x00000592 ERROR_INVALID_HOOK_FILTER Invalid hook procedure type.

1427 0x00000593 ERROR_INVALID_FILTER_PROC Invalid hook procedure.

1428 0x00000594 ERROR_HOOK_NEEDS_HMOD Cannot set nonlocal hook without a module

handle.

1429 0x00000595 ERROR_GLOBAL_ONLY_HOOK This hook procedure can only be set globally.

1430 0x00000596 ERROR_JOURNAL_HOOK_SET The journal hook procedure is already installed.

1431 0x00000597 ERROR_HOOK_NOT_INSTALLED The hook procedure is not installed.

1432 0x00000598 ERROR_INVALID_LB_MESSAGE Invalid message for single-selection list box.

1433 0x00000599 ERROR_SETCOUNT_ON_BAD_LB LB_SETCOUNT sent to non-lazy list box.

1434 0x0000059A ERROR_LB_WITHOUT_TABSTOPS This list box does not support tab stops.

1435 0x0000059B ERROR_DESTROY_OBJECT_OF_OTHER_THRE

Cannot destroy object created by another thread.

1436 0x0000059C ERROR_CHILD_WINDOW_MENU Child windows cannot have menus.

1437 0x0000059D ERROR_NO_SYSTEM_MENU The window does not have a system menu.

1438 0x0000059E ERROR_INVALID_MSGBOX_STYLE Invalid message box style.

1439 0x0000059F ERROR_INVALID_SPI_VALUE Invalid system-wide (SPI_*) parameter.

1440 0x000005A0 ERROR_SCREEN_ALREADY_LOCKED Screen already locked.

1441 0x000005A1 ERROR_HWNDS_HAVE_DIFF_PARENT All handles to windows in a multiple-window

position structure must have the same parent.

1442 0x000005A2 ERROR_NOT_CHILD_WINDOW The window is not a child window.

1443 0x000005A3 ERROR_INVALID_GW_COMMAND Invalid GW_* command.

1444 0x000005A4 ERROR_INVALID_THREAD_ID Invalid thread identifier.

1445 0x000005A5 ERROR_NON_MDICHILD_WINDOW Cannot process a message from a window that is

not a multiple document interface (MDI) window.

1446 0x000005A6 ERROR_POPUP_ALREADY_ACTIVE Popup menu already active.

1447 0x000005A7 ERROR_NO_SCROLLBARS The window does not have scroll bars.

1448 0x000005A8 ERROR_INVALID_SCROLLBAR_RANGE Scroll bar range cannot be greater than

MAXLONG.

1449 0x000005A9 ERROR_INVALID_SHOWWIN_COMMAND Cannot show or remove the window in the way

specified.

Appendix

Beckhoff Device Manager 105Version: 4.9

Error Description

decimal Hexadecimal Name

1450 0x000005AA ERROR_NO_SYSTEM_RESOURCES Insufficient system resources exist to complete

the requested service.

1451 0x000005AB ERROR_NONPAGED_SYSTEM_RESOURCES Insufficient system resources exist to complete

the requested service.

1452 0x000005AC ERROR_PAGED_SYSTEM_RESOURCES Insufficient system resources exist to complete

the requested service.

1453 0x000005AD ERROR_WORKING_SET_QUOTA Insufficient quota to complete the requested

service.

1454 0x000005AE ERROR_PAGEFILE_QUOTA Insufficient quota to complete the requested

service.

1455 0x000005AF ERROR_COMMITMENT_LIMIT The paging file is too small for this operation to

complete.

1456 0x000005B0 ERROR_MENU_ITEM_NOT_FOUND A menu item was not found.

1457 0x000005B1 ERROR_INVALID_KEYBOARD_HANDLE Invalid keyboard layout handle.

1458 0x000005B2 ERROR_HOOK_TYPE_NOT_ALLOWED Hook type not allowed.

1459 0x000005B3 ERROR_REQUIRES_INTERACTIVE_WINDOWST

ATION

This operation requires an interactive window

station.

1460 0x000005B4 ERROR_TIMEOUT This operation returned because the timeout

period expired.

1461 0x000005B5 ERROR_INVALID_MONITOR_HANDLE Invalid monitor handle.

1500 0x000005DC ERROR_EVENTLOG_FILE_CORRUPT The event log file is corrupted.

1501 0x000005DD ERROR_EVENTLOG_CANT_START No event log file could be opened, so the event

logging service did not start.

1502 0x000005DE ERROR_LOG_FILE_FULL The event log file is full.

1503 0x000005DF ERROR_EVENTLOG_FILE_CHANGED The event log file has changed between read

operations.

Appendix

Beckhoff Device Manager106 Version: 4.9

Error Description

decimal Hexadecimal Name

1601 0x00000641 ERROR_INSTALL_SERVICE_FAILURE The Windows Installer service could not be

accessed. Contact your support personnel to

verify that the Windows Installer service is

properly registered.

1602 0x00000642 ERROR_INSTALL_USEREXIT User cancelled installation.

1603 0x00000643 ERROR_INSTALL_FAILURE Fatal error during installation.

1604 0x00000644 ERROR_INSTALL_SUSPEND Installation suspended, incomplete.

1605 0x00000645 ERROR_UNKNOWN_PRODUCT This action is only valid for products that are

currently installed.

1606 0x00000646 ERROR_UNKNOWN_FEATURE Feature ID not registered.

1607 0x00000647 ERROR_UNKNOWN_COMPONENT Component ID not registered.

1608 0x00000648 ERROR_UNKNOWN_PROPERTY Unknown property.

1609 0x00000649 ERROR_INVALID_HANDLE_STATE Handle is in an invalid state.

1610 0x0000064A ERROR_BAD_CONFIGURATION The configuration data for this product is corrupt.

Contact your support personnel.

1611 0x0000064B ERROR_INDEX_ABSENT Component qualifier not present.

1612 0x0000064C ERROR_INSTALL_SOURCE_ABSENT The installation source for this product is not

available. Verify that the source exists and that

you can access it.

1613 0x0000064D ERROR_INSTALL_PACKAGE_VERSION This installation package cannot be installed by

the Windows Installer service. You must install a

Windows service pack that contains a newer

version of the Windows Installer service.

1614 0x0000064E ERROR_PRODUCT_UNINSTALLED Product is uninstalled.

1615 0x0000064F ERROR_BAD_QUERY_SYNTAX SQL query syntax invalid or unsupported.

1616 0x00000650 ERROR_INVALID_FIELD Record field does not exist.

1617 0x00000651 ERROR_DEVICE_REMOVED The device has been removed.

1618 0x00000652 ERROR_INSTALL_ALREADY_RUNNING Another installation is already in progress.

Complete that installation before proceeding with

this install.

1619 0x00000653 ERROR_INSTALL_PACKAGE_OPEN_FAILED This installation package could not be opened.

Verify that the package exists and that you can

access it, or contact the application vendor to

verify that this is a valid Windows Installer

package.

1620 0x00000654 ERROR_INSTALL_PACKAGE_INVALID This installation package could not be opened.

Contact the application vendor to verify that this is

a valid Windows Installer package.

1621 0x00000655 ERROR_INSTALL_UI_FAILURE There was an error starting the Windows Installer

service user interface. Contact your support

personnel.

1622 0x00000656 ERROR_INSTALL_LOG_FAILURE Error opening installation log file. Verify that the

specified log file location exists and that you can

write to it.

1623 0x00000657 ERROR_INSTALL_LANGUAGE_UNSUPPORTED The language of this installation package is not

supported by your system.

1624 0x00000658 ERROR_INSTALL_TRANSFORM_FAILURE Error applying transforms. Verify that the specified

transform paths are valid.

1625 0x00000659 ERROR_INSTALL_PACKAGE_REJECTED This installation is forbidden by system policy.

Contact your system administrator.

1626 0x0000065A ERROR_FUNCTION_NOT_CALLED Function could not be executed.

1627 0x0000065B ERROR_FUNCTION_FAILED Function failed during execution.

1628 0x0000065C ERROR_INVALID_TABLE Invalid or unknown table specified.

1629 0x0000065D ERROR_DATATYPE_MISMATCH Data supplied is of wrong type.

1630 0x0000065E ERROR_UNSUPPORTED_TYPE Data of this type is not supported.

1631 0x0000065F ERROR_CREATE_FAILED The Windows Installer service failed to start.

Contact your support personnel.

1632 0x00000660 ERROR_INSTALL_TEMP_UNWRITABLE The temp folder is either full or inaccessible.

Verify that the temp folder exists and that you can

write to it.

1633 0x00000661 ERROR_INSTALL_PLATFORM_UNSUPPORTED This installation package is not supported by this

processor type. Contact your product vendor.

1634 0x00000662 ERROR_INSTALL_NOTUSED Component not used on this computer.

Appendix

Beckhoff Device Manager 107Version: 4.9

Error Description

decimal Hexadecimal Name

1635 0x00000663 ERROR_PATCH_PACKAGE_OPEN_FAILED This patch package could not be opened. Verify

that the patch package exists and that you can

access it, or contact the application vendor to

verify that this is a valid Windows Installer patch

package.

1636 0x00000664 ERROR_PATCH_PACKAGE_INVALID This patch package could not be opened. Contact

the application vendor to verify that this is a valid

Windows Installer patch package.

1637 0x00000665 ERROR_PATCH_PACKAGE_UNSUPPORTED. This patch package cannot be processed by the

Windows Installer service. You must install a

Windows service pack that contains a newer

version of the Windows Installer service.

1638 0x00000666 ERROR_PRODUCT_VERSION Another version of this product is already

installed. Installation of this version cannot

continue. To configure or remove the existing

version of this product, use Add/Remove

Programs on the Control Panel.

1639 0x00000667 ERROR_INVALID_COMMAND_LINE Invalid command line argument. Consult the

Windows Installer SDK for detailed command line

help.

1640 0x00000668 ERROR_INSTALL_REMOTE_DISALLOWED Only administrators have permission to add,

remove, or configure server software during a

Terminal Services remote session. If you want to

install or configure software on the server, contact

your network administrator.

1641 0x00000669 ERROR_SUCCESS_REBOOT_INITIATED The requested operation completed successfully.

The system will be restarted so the changes can

take effect.

1642 0x0000066A ERROR_PATCH_TARGET_NOT_FOUND The upgrade patch cannot be installed by the

Windows Installer service because the program to

be upgraded may be missing, or the upgrade

patch may update a different version of the

program. Verify that the program to be upgraded

exists on your computer and that you have the

correct upgrade patch.

1643 0x0000066B ERROR_PATCH_PACKAGE_REJECTED The patch package is not permitted by system

policy. It is not signed with an appropriate

certificate.

1644 0x0000066C ERROR_INSTALL_TRANSFORM_REJECTED One or more customizations are not permitted by

system policy. They are not signed with an

appropriate certificate.

1700 0x000006A4 RPC_S_INVALID_STRING_BINDING The string binding is invalid.

1701 0x000006A5 RPC_S_WRONG_KIND_OF_BINDING The binding handle is not the correct type.

1702 0x000006A6 RPC_S_INVALID_BINDING The binding handle is invalid.

1703 0x000006A7 RPC_S_PROTSEQ_NOT_SUPPORTED The RPC protocol sequence is not supported.

1704 0x000006A8 RPC_S_INVALID_RPC_PROTSEQ The RPC protocol sequence is invalid.

1705 0x000006A9 RPC_S_INVALID_STRING_UUID The string universal unique identifier (UUID) is

invalid.

1706 0x000006AA RPC_S_INVALID_ENDPOINT_FORMAT The endpoint format is invalid.

1707 0x000006AB RPC_S_INVALID_NET_ADDR The network address is invalid.

1708 0x000006AC RPC_S_NO_ENDPOINT_FOUND No endpoint was found.

1709 0x000006AD RPC_S_INVALID_TIMEOUT The timeout value is invalid.

1710 0x000006AE RPC_S_OBJECT_NOT_FOUND The object universal unique identifier (UUID) was

not found.

1711 0x000006AF RPC_S_ALREADY_REGISTERED The object universal unique identifier (UUID) has

already been registered.

1712 0x000006B0 RPC_S_TYPE_ALREADY_REGISTERED The type universal unique identifier (UUID) has

already been registered.

1713 0x000006B1 RPC_S_ALREADY_LISTENING The RPC server is already listening.

1714 0x000006B2 RPC_S_NO_PROTSEQS_REGISTERED No protocol sequences have been registered.

1715 0x000006B3 RPC_S_NOT_LISTENING The RPC server is not listening.

1716 0x000006B4 RPC_S_UNKNOWN_MGR_TYPE The manager type is unknown.

1717 0x000006B5 RPC_S_UNKNOWN_IF The interface is unknown.

1718 0x000006B6 RPC_S_NO_BINDINGS There are no bindings.

1719 0x000006B7 RPC_S_NO_PROTSEQS There are no protocol sequences.

1720 0x000006B8 RPC_S_CANT_CREATE_ENDPOINT The endpoint cannot be created.

Appendix

Beckhoff Device Manager108 Version: 4.9

Error Description

decimal Hexadecimal Name

1721 0x000006B9 RPC_S_OUT_OF_RESOURCES Not enough resources are available to complete

this operation.

1722 0x000006BA RPC_S_SERVER_UNAVAILABLE The RPC server is unavailable.

1723 0x000006BB RPC_S_SERVER_TOO_BUSY The RPC server is too busy to complete this

operation.

1724 0x000006BC RPC_S_INVALID_NETWORK_OPTIONS The network options are invalid.

1725 0x000006BD RPC_S_NO_CALL_ACTIVE There are no remote procedure calls active on

this thread.

1726 0x000006BE RPC_S_CALL_FAILED The remote procedure call failed.

1727 0x000006BF RPC_S_CALL_FAILED_DNE The remote procedure call failed and did not

execute.

1728 0x000006C0 RPC_S_PROTOCOL_ERROR A remote procedure call (RPC) protocol error

occurred.

1730 0x000006C2 RPC_S_UNSUPPORTED_TRANS_SYN The transfer syntax is not supported by the RPC

server.

1732 0x000006C4 RPC_S_UNSUPPORTED_TYPE The universal unique identifier (UUID) type is not

supported.

1733 0x000006C5 RPC_S_INVALID_TAG The tag is invalid.

1734 0x000006C6 RPC_S_INVALID_BOUND The array bounds are invalid.

1735 0x000006C7 RPC_S_NO_ENTRY_NAME The binding does not contain an entry name.

1736 0x000006C8 RPC_S_INVALID_NAME_SYNTAX The name syntax is invalid.

1737 0x000006C9 RPC_S_UNSUPPORTED_NAME_SYNTAX The name syntax is not supported.

1739 0x000006CB RPC_S_UUID_NO_ADDRESS No network address is available to use to

construct a universal unique identifier (UUID).

1740 0x000006CC RPC_S_DUPLICATE_ENDPOINT The endpoint is a duplicate.

1741 0x000006CD RPC_S_UNKNOWN_AUTHN_TYPE The authentication type is unknown.

1742 0x000006CE RPC_S_MAX_CALLS_TOO_SMALL The maximum number of calls is too small.

1743 0x000006CF RPC_S_STRING_TOO_LONG The string is too long.

1744 0x000006D0 RPC_S_PROTSEQ_NOT_FOUND The RPC protocol sequence was not found.

1745 0x000006D1 RPC_S_PROCNUM_OUT_OF_RANGE The procedure number is out of range.

1746 0x000006D2 RPC_S_BINDING_HAS_NO_AUTH The binding does not contain any authentication

information.

1747 0x000006D3 RPC_S_UNKNOWN_AUTHN_SERVICE The authentication service is unknown.

1748 0x000006D4 RPC_S_UNKNOWN_AUTHN_LEVEL The authentication level is unknown.

1749 0x000006D5 RPC_S_INVALID_AUTH_IDENTITY The security context is invalid.

1750 0x000006D6 RPC_S_UNKNOWN_AUTHZ_SERVICE The authorization service is unknown.

1751 0x000006D7 EPT_S_INVALID_ENTRY The entry is invalid.

1752 0x000006D8 EPT_S_CANT_PERFORM_OP The server endpoint cannot perform the

operation.

1753 0x000006D9 EPT_S_NOT_REGISTERED There are no more endpoints available from the

endpoint mapper.

1754 0x000006DA RPC_S_NOTHING_TO_EXPORT No interfaces have been exported.

1755 0x000006DB RPC_S_INCOMPLETE_NAME The entry name is incomplete.

1756 0x000006DC RPC_S_INVALID_VERS_OPTION The version option is invalid.

1757 0x000006DD RPC_S_NO_MORE_MEMBERS There are no more members.

1758 0x000006DE RPC_S_NOT_ALL_OBJS_UNEXPORTED There is nothing to unexport.

1759 0x000006DF RPC_S_INTERFACE_NOT_FOUND The interface was not found.

1760 0x000006E0 RPC_S_ENTRY_ALREADY_EXISTS The entry already exists.

1761 0x000006E1 RPC_S_ENTRY_NOT_FOUND The entry is not found.

1762 0x000006E2 RPC_S_NAME_SERVICE_UNAVAILABLE The name service is unavailable.

1763 0x000006E3 RPC_S_INVALID_NAF_ID The network address family is invalid.

1764 0x000006E4 RPC_S_CANNOT_SUPPORT The requested operation is not supported.

1765 0x000006E5 RPC_S_NO_CONTEXT_AVAILABLE No security context is available to allow

impersonation.

1766 0x000006E6 RPC_S_INTERNAL_ERROR An internal error occurred in a remote procedure

call (RPC).

1767 0x000006E7 RPC_S_ZERO_DIVIDE The RPC server attempted an integer division by

zero.

1768 0x000006E8 RPC_S_ADDRESS_ERROR An addressing error occurred in the RPC server.

1769 0x000006E9 RPC_S_FP_DIV_ZERO A floating-point operation at the RPC server

caused a division by zero.

Appendix

Beckhoff Device Manager 109Version: 4.9

Error Description

decimal Hexadecimal Name

1770 0x000006EA RPC_S_FP_UNDERFLOW A floating-point underflow occurred at the RPC

server.

1771 0x000006EB RPC_S_FP_OVERFLOW A floating-point overflow occurred at the RPC

server.

1772 0x000006EC RPC_X_NO_MORE_ENTRIES The list of RPC servers available for the binding

of auto handles has been exhausted.

1773 0x000006ED RPC_X_SS_CHAR_TRANS_OPEN_FAIL Unable to open the character translation table file.

1774 0x000006EE RPC_X_SS_CHAR_TRANS_SHORT_FILE The file containing the character translation table

has fewer than 512 bytes.

1775 0x000006EF RPC_X_SS_IN_NULL_CONTEXT A null context handle was passed from the client

to the host during a remote procedure call.

1777 0x000006F1 RPC_X_SS_CONTEXT_DAMAGED The context handle changed during a remote

procedure call.

1778 0x000006F2 RPC_X_SS_HANDLES_MISMATCH The binding handles passed to a remote

procedure call do not match.

1779 0x000006F3 RPC_X_SS_CANNOT_GET_CALL_HANDLE The stub is unable to get the remote procedure

call handle.

1780 0x000006F4 RPC_X_NULL_REF_POINTER A null reference pointer was passed to the stub.

1781 0x000006F5 RPC_X_ENUM_VALUE_OUT_OF_RANGE The enumeration value is out of range.

1782 0x000006F6 RPC_X_BYTE_COUNT_TOO_SMALL The byte count is too small.

1783 0x000006F7 RPC_X_BAD_STUB_DATA The stub received bad data.

1784 0x000006F8 ERROR_INVALID_USER_BUFFER The supplied user buffer is not valid for the

requested operation.

1785 0x000006F9 ERROR_UNRECOGNIZED_MEDIA The disk media is not recognized. It may not be

formatted.

1786 0x000006FA ERROR_NO_TRUST_LSA_SECRET The workstation does not have a trust secret.

1787 0x000006FB ERROR_NO_TRUST_SAM_ACCOUNT The security database on the server does not

have a computer account for this workstation trust

relationship.

1788 0x000006FC ERROR_TRUSTED_DOMAIN_FAILURE The trust relationship between the primary

domain and the trusted domain failed.

1789 0x000006FD ERROR_TRUSTED_RELATIONSHIP_FAILURE The trust relationship between this workstation

and the primary domain failed.

1790 0x000006FE ERROR_TRUST_FAILURE The network logon failed.

1791 0x000006FF RPC_S_CALL_IN_PROGRESS A remote procedure call is already in progress for

this thread.

1792 0x00000700 ERROR_NETLOGON_NOT_STARTED An attempt was made to logon, but the network

logon service was not started.

1793 0x00000701 ERROR_ACCOUNT_EXPIRED The user's account has expired.

1794 0x00000702 ERROR_REDIRECTOR_HAS_OPEN_HANDLES The redirector is in use and cannot be unloaded.

1795 0x00000703 ERROR_PRINTER_DRIVER_ALREADY_INSTALL

The specified printer driver is already installed.

1796 0x00000704 ERROR_UNKNOWN_PORT The specified port is unknown.

1797 0x00000705 ERROR_UNKNOWN_PRINTER_DRIVER The printer driver is unknown.

1798 0x00000706 ERROR_UNKNOWN_PRINTPROCESSOR The print processor is unknown.

1799 0x00000707 ERROR_INVALID_SEPARATOR_FILE The specified separator file is invalid.

Appendix

Beckhoff Device Manager110 Version: 4.9

Error Description

decimal Hexadecimal Name

1800 0x00000708 ERROR_INVALID_PRIORITY The specified priority is invalid.

1801 0x00000709 ERROR_INVALID_PRINTER_NAME The printer name is invalid.

1802 0x0000070A ERROR_PRINTER_ALREADY_EXISTS The printer already exists.

1803 0x0000070B ERROR_INVALID_PRINTER_COMMAND The printer command is invalid.

1804 0x0000070C ERROR_INVALID_DATATYPE The specified datatype is invalid.

1805 0x0000070D ERROR_INVALID_ENVIRONMENT The environment specified is invalid.

1806 0x0000070E RPC_S_NO_MORE_BINDINGS There are no more bindings.

1807 0x0000070F ERROR_NOLOGON_INTERDOMAIN_TRUST_AC

COUNT

The account used is an interdomain trust account.

Use your global user account or local user

account to access this server.

1808 0x00000710 ERROR_NOLOGON_WORKSTATION_TRUST_AC

COUNT

The account used is a computer account. Use

your global user account or local user account to

access this server.

1809 0x00000711 ERROR_NOLOGON_SERVER_TRUST_ACCOUN

The account used is a server trust account. Use

your global user account or local user account to

access this server.

1810 0x00000712 ERROR_DOMAIN_TRUST_INCONSISTENT The name or security ID (SID) of the domain

specified is inconsistent with the trust information

for that domain.

1811 0x00000713 ERROR_SERVER_HAS_OPEN_HANDLES The server is in use and cannot be unloaded.

1812 0x00000714 ERROR_RESOURCE_DATA_NOT_FOUND The specified image file did not contain a

resource section.

1813 0x00000715 ERROR_RESOURCE_TYPE_NOT_FOUND The specified resource type cannot be found in

the image file.

1814 0x00000716 ERROR_RESOURCE_NAME_NOT_FOUND The specified resource name cannot be found in

the image file.

1815 0x00000717 ERROR_RESOURCE_LANG_NOT_FOUND The specified resource language ID cannot be

found in the image file.

1816 0x00000718 ERROR_NOT_ENOUGH_QUOTA Not enough quota is available to process this

command.

1817 0x00000719 RPC_S_NO_INTERFACES No interfaces have been registered.

1818 0x0000071A RPC_S_CALL_CANCELLED The remote procedure call was cancelled.

1819 0x0000071B RPC_S_BINDING_INCOMPLETE The binding handle does not contain all required

information.

1820 0x0000071C RPC_S_COMM_FAILURE A communications failure occurred during a

remote procedure call.

1821 0x0000071D RPC_S_UNSUPPORTED_AUTHN_LEVEL The requested authentication level is not

supported.

1822 0x0000071E RPC_S_NO_PRINC_NAME No principal name registered.

1823 0x0000071F RPC_S_NOT_RPC_ERROR The error specified is not a valid Windows RPC

error code.

1824 0x00000720 RPC_S_UUID_LOCAL_ONLY A UUID that is valid only on this computer has

been allocated.

1825 0x00000721 RPC_S_SEC_PKG_ERROR A security package specific error occurred.

1826 0x00000722 RPC_S_NOT_CANCELLED Thread is not canceled.

1827 0x00000723 RPC_X_INVALID_ES_ACTION Invalid operation on the encoding/decoding

handle.

1828 0x00000724 RPC_X_WRONG_ES_VERSION Incompatible version of the serializing package.

1829 0x00000725 RPC_X_WRONG_STUB_VERSION Incompatible version of the RPC stub.

1830 0x00000726 RPC_X_INVALID_PIPE_OBJECT The RPC pipe object is invalid or corrupted.

1831 0x00000727 RPC_X_WRONG_PIPE_ORDER An invalid operation was attempted on an RPC

pipe object.

1832 0x00000728 RPC_X_WRONG_PIPE_VERSION Unsupported RPC pipe version.

1898 0x0000076A RPC_S_GROUP_MEMBER_NOT_FOUND The group member was not found.

1899 0x0000076B EPT_S_CANT_CREATE The endpoint mapper database entry could not be

created.

1900 0x0000076C RPC_S_INVALID_OBJECT The object universal unique identifier (UUID) is

the nil UUID.

1901 0x0000076D ERROR_INVALID_TIME The specified time is invalid.

1902 0x0000076E ERROR_INVALID_FORM_NAME The specified form name is invalid.

1903 0x0000076F ERROR_INVALID_FORM_SIZE The specified form size is invalid.

1904 0x00000770 ERROR_ALREADY_WAITING The specified printer handle is already being

waited on

Appendix

Beckhoff Device Manager 111Version: 4.9

Error Description

decimal Hexadecimal Name

1905 0x00000771 ERROR_PRINTER_DELETED The specified printer has been deleted.

1906 0x00000772 ERROR_INVALID_PRINTER_STATE The state of the printer is invalid.

1907 0x00000773 ERROR_PASSWORD_MUST_CHANGE The user's password must be changed before

logging on the first time.

1908 0x00000774 ERROR_DOMAIN_CONTROLLER_NOT_FOUND Could not find the domain controller for this

domain.

1909 0x00000775 ERROR_ACCOUNT_LOCKED_OUT The referenced account is currently locked out

and may not be logged on to.

1910 0x00000776 OR_INVALID_OXID The object exporter specified was not found.

1911 0x00000777 OR_INVALID_OID The object specified was not found.

1912 0x00000778 OR_INVALID_SET The object resolver set specified was not found.

1913 0x00000779 RPC_S_SEND_INCOMPLETE Some data remains to be sent in the request

buffer.

1914 0x0000077A RPC_S_INVALID_ASYNC_HANDLE Invalid asynchronous remote procedure call

handle.

1915 0x0000077B RPC_S_INVALID_ASYNC_CALL Invalid asynchronous RPC call handle for this

operation.

1916 0x0000077C RPC_X_PIPE_CLOSED The RPC pipe object has already been closed.

1917 0x0000077D RPC_X_PIPE_DISCIPLINE_ERROR The RPC call completed before all pipes were

processed.

1918 0x0000077E RPC_X_PIPE_EMPTY No more data is available from the RPC pipe.

1919 0x0000077F ERROR_NO_SITENAME No site name is available for this machine.

1920 0x00000780 ERROR_CANT_ACCESS_FILE The file can not be accessed by the system.

1921 0x00000781 ERROR_CANT_RESOLVE_FILENAME The name of the file cannot be resolved by the

system.

1922 0x00000782 RPC_S_ENTRY_TYPE_MISMATCH The entry is not of the expected type.

1923 0x00000783 RPC_S_NOT_ALL_OBJS_EXPORTED Not all object UUIDs could be exported to the

specified entry.

1924 0x00000784 RPC_S_INTERFACE_NOT_EXPORTED Interface could not be exported to the specified

entry.

1925 0x00000785 RPC_S_PROFILE_NOT_ADDED The specified profile entry could not be added.

1926 0x00000786 RPC_S_PRF_ELT_NOT_ADDED The specified profile element could not be added.

1927 0x00000787 RPC_S_PRF_ELT_NOT_REMOVED The specified profile element could not be

removed.

1928 0x00000788 RPC_S_GRP_ELT_NOT_ADDED The group element could not be added.

1929 0x00000789 RPC_S_GRP_ELT_NOT_REMOVED The group element could not be removed.

1930 0x0000078A ERROR_KM_DRIVER_BLOCKED The printer driver is not compatible with a policy

enabled on your computer that blocks NT 4.0

drivers.

Appendix

Beckhoff Device Manager112 Version: 4.9

Error Description

decimal Hexadecimal Name

2000 0x000007D0 ERROR_INVALID_PIXEL_FORMAT The pixel format is invalid.

2001 0x000007D1 ERROR_BAD_DRIVER The specified driver is invalid.

2002 0x000007D2 ERROR_INVALID_WINDOW_STYLE The window style or class attribute is invalid for

this operation.

2003 0x000007D3 ERROR_METAFILE_NOT_SUPPORTED The requested metafile operation is not

supported.

2004 0x000007D4 ERROR_TRANSFORM_NOT_SUPPORTED The requested transformation operation is not

supported.

2005 0x000007D5 ERROR_CLIPPING_NOT_SUPPORTED The requested clipping operation is not

supported.

2010 0x000007DA ERROR_INVALID_CMM The specified color management module is

invalid.

2011 0x000007DB ERROR_INVALID_PROFILE The specified color profile is invalid.

2012 0x000007DC ERROR_TAG_NOT_FOUND The specified tag was not found.

2013 0x000007DD ERROR_TAG_NOT_PRESENT A required tag is not present.

2014 0x000007DE ERROR_DUPLICATE_TAG The specified tag is already present.

2015 0x000007DF ERROR_PROFILE_NOT_ASSOCIATED_WITH_DE

VICE

The specified color profile is not associated with

any device.

2016 0x000007E0 ERROR_PROFILE_NOT_FOUND The specified color profile was not found.

2017 0x000007E1 ERROR_INVALID_COLORSPACE The specified color space is invalid.

2018 0x000007E2 ERROR_ICM_NOT_ENABLED Image Color Management is not enabled.

2019 0x000007E3 ERROR_DELETING_ICM_XFORM There was an error while deleting the color

transform.

2020 0x000007E4 ERROR_INVALID_TRANSFORM The specified color transform is invalid.

2021 0x000007E5 ERROR_COLORSPACE_MISMATCH The specified transform does not match the

bitmap's color space.

2022 0x000007E6 ERROR_INVALID_COLORINDEX The specified named color index is not present in

the profile.

2108 0x0000083C ERROR_CONNECTED_OTHER_PASSWORD The network connection was made successfully,

but the user had to be prompted for a password

other than the one originally specified.

2202 0x0000089A ERROR_BAD_USERNAME The specified username is invalid.

2250 0x000008CA ERROR_NOT_CONNECTED This network connection does not exist.

2401 0x00000961 ERROR_OPEN_FILES This network connection has files open or

requests pending.

2402 0x00000962 ERROR_ACTIVE_CONNECTIONS Active connections still exist.

2404 0x00000964 ERROR_DEVICE_IN_USE The device is in use by an active process and

cannot be disconnected.

2500 0x000009C4 ERROR_PKINIT_FAILURE The kerberos protocol encountered an error while

validating the KDC certificate during smartcard

logon.

2501 0x000009C5 ERROR_SMARTCARD_SUBSYSTEM_FAILURE The kerberos protocol encountered an error while

attempting to utilize the smartcard subsystem.

Appendix

Beckhoff Device Manager 113Version: 4.9

Error Description

decimal Hexadecimal Name

3000 0x00000BB8 ERROR_UNKNOWN_PRINT_MONITOR The specified print monitor is unknown.

3001 0x00000BB9 ERROR_PRINTER_DRIVER_IN_USE The specified printer driver is currently in use.

3002 0x00000BBA ERROR_SPOOL_FILE_NOT_FOUND The spool file was not found.

3003 0x00000BBB ERROR_SPL_NO_STARTDOC A StartDocPrinter call was not issued.

3004 0x00000BBC ERROR_SPL_NO_ADDJOB An AddJob call was not issued.

3005 0x00000BBD ERROR_PRINT_PROCESSOR_ALREADY_INSTA

LLED

The specified print processor has already been

installed.

3006 0x00000BBE ERROR_PRINT_MONITOR_ALREADY_INSTALLE

The specified print monitor has already been

installed.

3007 0x00000BBF ERROR_INVALID_PRINT_MONITOR The specified print monitor does not have the

required functions.

3008 0x00000BC0 ERROR_PRINT_MONITOR_IN_USE The specified print monitor is currently in use.

3009 0x00000BC1 ERROR_PRINTER_HAS_JOBS_QUEUED The requested operation is not allowed when

there are jobs queued to the printer.

3010 0x00000BC2 ERROR_SUCCESS_REBOOT_REQUIRED The requested operation is successful. Changes

will not be effective until the system is rebooted.

3011 0x00000BC3 ERROR_SUCCESS_RESTART_REQUIRED The requested operation is successful. Changes

will not be effective until the service is restarted.

3012 0x00000BC4 ERROR_PRINTER_NOT_FOUND No printers were found.

4000 0x00000FA0 ERROR_WINS_INTERNAL WINS encountered an error while processing the

command.

4001 0x00000FA1 ERROR_CAN_NOT_DEL_LOCAL_WINS The local WINS can not be deleted.

4002 0x00000FA2 ERROR_STATIC_INIT The importation from the file failed.

4003 0x00000FA3 ERROR_INC_BACKUP The backup failed. Was a full backup done

before?

4004 0x00000FA4 ERROR_FULL_BACKUP The backup failed. Check the directory to which

you are backing the database.

4005 0x00000FA5 ERROR_REC_NON_EXISTENT The name does not exist in the WINS database.

4006 0x00000FA6 ERROR_RPL_NOT_ALLOWED Replication with a nonconfigured partner is not

allowed.

4100 0x00001004 ERROR_DHCP_ADDRESS_CONFLICT The DHCP client has obtained an IP address that

is already in use on the network. The local

interface will be disabled until the DHCP client

can obtain a new address.

4200 0x00001068 ERROR_WMI_GUID_NOT_FOUND The GUID passed was not recognized as valid by

a WMI data provider.

4201 0x00001069 ERROR_WMI_INSTANCE_NOT_FOUND The instance name passed was not recognized

as valid by a WMI data provider.

4202 0x0000106A ERROR_WMI_ITEMID_NOT_FOUND The data item ID passed was not recognized as

valid by a WMI data provider.

4203 0x0000106B ERROR_WMI_TRY_AGAIN The WMI request could not be completed and

should be retried.

4204 0x0000106C ERROR_WMI_DP_NOT_FOUND The WMI data provider could not be located.

4205 0x0000106D ERROR_WMI_UNRESOLVED_INSTANCE_REF The WMI data provider references an instance set

that has not been registered.

4206 0x0000106E ERROR_WMI_ALREADY_ENABLED The WMI data block or event notification has

already been enabled.

4207 0x0000106F ERROR_WMI_GUID_DISCONNECTED The WMI data block is no longer available.

4208 0x00001070 ERROR_WMI_SERVER_UNAVAILABLE The WMI data service is not available.

4209 0x00001071 ERROR_WMI_DP_FAILED The WMI data provider failed to carry out the

request.

4210 0x00001072 ERROR_WMI_INVALID_MOF The WMI MOF information is not valid.

4211 0x00001073 ERROR_WMI_INVALID_REGINFO The WMI registration information is not valid.

4212 0x00001074 ERROR_WMI_ALREADY_DISABLED The WMI data block or event notification has

already been disabled.

4213 0x00001075 ERROR_WMI_READ_ONLY The WMI data item or data block is read only.

4214 0x00001076 ERROR_WMI_SET_FAILURE The WMI data item or data block could not be

changed.

4300 0x000010CC ERROR_INVALID_MEDIA The media identifier does not represent a valid

medium.

4301 0x000010CD ERROR_INVALID_LIBRARY The library identifier does not represent a valid

library.

Appendix

Beckhoff Device Manager114 Version: 4.9

Error Description

decimal Hexadecimal Name

4302 0x000010CE ERROR_INVALID_MEDIA_POOL The media pool identifier does not represent a

valid media pool.

4303 0x000010CF ERROR_DRIVE_MEDIA_MISMATCH The drive and medium are not compatible or exist

in different libraries.

4304 0x000010D0 ERROR_MEDIA_OFFLINE The medium currently exists in an offline library

and must be online to perform this operation.

4305 0x000010D1 ERROR_LIBRARY_OFFLINE The operation cannot be performed on an offline

library.

4306 0x000010D2 ERROR_EMPTY The library, drive, or media pool is empty.

4307 0x000010D3 ERROR_NOT_EMPTY The library, drive, or media pool must be empty to

perform this operation.

4308 0x000010D4 ERROR_MEDIA_UNAVAILABLE No media is currently available in this media pool

or library.

4309 0x000010D5 ERROR_RESOURCE_DISABLED A resource required for this operation is disabled.

4310 0x000010D6 ERROR_INVALID_CLEANER The media identifier does not represent a valid

cleaner.

4311 0x000010D7 ERROR_UNABLE_TO_CLEAN The drive cannot be cleaned or does not support

cleaning.

4312 0x000010D8 ERROR_OBJECT_NOT_FOUND The object identifier does not represent a valid

object.

4313 0x000010D9 ERROR_DATABASE_FAILURE Unable to read from or write to the database.

4314 0x000010DA ERROR_DATABASE_FULL The database is full.

4315 0x000010DB ERROR_MEDIA_INCOMPATIBLE The medium is not compatible with the device or

media pool.

4316 0x000010DC ERROR_RESOURCE_NOT_PRESENT The resource required for this operation does not

exist.

4317 0x000010DD ERROR_INVALID_OPERATION The operation identifier is not valid.

4318 0x000010DE ERROR_MEDIA_NOT_AVAILABLE The media is not mounted or ready for use.

4319 0x000010DF ERROR_DEVICE_NOT_AVAILABLE The device is not ready for use.

4320 0x000010E0 ERROR_REQUEST_REFUSED The operator or administrator has refused the

request.

4321 0x000010E1 ERROR_INVALID_DRIVE_OBJECT The drive identifier does not represent a valid

drive.

4322 0x000010E2 ERROR_LIBRARY_FULL Library is full. No slot is available for use.

4323 0x000010E3 ERROR_MEDIUM_NOT_ACCESSIBLE The transport cannot access the medium.

4324 0x000010E4 ERROR_UNABLE_TO_LOAD_MEDIUM Unable to load the medium into the drive.

4325 0x000010E5 ERROR_UNABLE_TO_INVENTORY_DRIVE Unable to retrieve status about the drive.

4326 0x000010E6 ERROR_UNABLE_TO_INVENTORY_SLOT Unable to retrieve status about the slot.

4327 0x000010E7 ERROR_UNABLE_TO_INVENTORY_TRANSPORT Unable to retrieve status about the transport.

4328 0x000010E8 ERROR_TRANSPORT_FULL Cannot use the transport because it is already in

use.

4329 0x000010E9 ERROR_CONTROLLING_IEPORT Unable to open or close the inject/eject port.

4330 0x000010EA ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA Unable to eject the media because it is in a drive.

4331 0x000010EB ERROR_CLEANER_SLOT_SET A cleaner slot is already reserved.

4332 0x000010EC ERROR_CLEANER_SLOT_NOT_SET A cleaner slot is not reserved.

4333 0x000010ED ERROR_CLEANER_CARTRIDGE_SPENT The cleaner cartridge has performed the

maximum number of drive cleanings.

4334 0x000010EE ERROR_UNEXPECTED_OMID Unexpected on-medium identifier.

4335 0x000010EF ERROR_CANT_DELETE_LAST_ITEM The last remaining item in this group or resource

cannot be deleted.

4336 0x000010F0 ERROR_MESSAGE_EXCEEDS_MAX_SIZE The message provided exceeds the maximum

size allowed for this parameter.

4337 0x000010F1 ERROR_VOLUME_CONTAINS_SYS_FILES The volume contains system or paging files.

4338 0x000010F2 ERROR_INDIGENOUS_TYPE The media type cannot be removed from this

library since at least one drive in the library

reports it can support this media type.

4339 0x000010F3 ERROR_NO_SUPPORTING_DRIVES This offline media cannot be mounted on this

system since no enabled drives are present which

can be used.

4340 0x000010F4 ERROR_CLEANER_CARTRIDGE_INSTALLED A cleaner cartridge is present in the tape library.

4350 0x000010FE ERROR_FILE_OFFLINE The remote storage service was not able to recall

the file.

Appendix

Beckhoff Device Manager 115Version: 4.9

Error Description

decimal Hexadecimal Name

4351 0x000010FF ERROR_REMOTE_STORAGE_NOT_ACTIVE The remote storage service is not operational at

this time.

4352 0x00001100 ERROR_REMOTE_STORAGE_MEDIA_ERROR The remote storage service encountered a media

error.

4390 0x00001126 ERROR_NOT_A_REPARSE_POINT The file or directory is not a reparse point.

4391 0x00001127 ERROR_REPARSE_ATTRIBUTE_CONFLICT The reparse point attribute cannot be set because

it conflicts with an existing attribute.

4392 0x00001128 ERROR_INVALID_REPARSE_DATA The data present in the reparse point buffer is

invalid.

4393 0x00001129 ERROR_REPARSE_TAG_INVALID The tag present in the reparse point buffer is

invalid.

4394 0x0000112A ERROR_REPARSE_TAG_MISMATCH There is a mismatch between the tag specified in

the request and the tag present in the reparse

point.

4500 0x00001194 ERROR_VOLUME_NOT_SIS_ENABLED Single Instance Storage is not available on this

volume.

Appendix

Beckhoff Device Manager116 Version: 4.9

Error Description

decimal Hexadecimal Name

5001 0x00001389 ERROR_DEPENDENT_RESOURCE_EXISTS The cluster resource cannot be moved to another

group because other resources are dependent on

it.

5002 0x0000138A ERROR_DEPENDENCY_NOT_FOUND The cluster resource dependency cannot be

found.

5003 0x0000138B ERROR_DEPENDENCY_ALREADY_EXISTS The cluster resource cannot be made dependent

on the specified resource because it is already

dependent.

5004 0x0000138C ERROR_RESOURCE_NOT_ONLINE The cluster resource is not online.

5005 0x0000138D ERROR_HOST_NODE_NOT_AVAILABLE A cluster node is not available for this operation.

5006 0x0000138E ERROR_RESOURCE_NOT_AVAILABLE The cluster resource is not available.

5007 0x0000138F ERROR_RESOURCE_NOT_FOUND The cluster resource could not be found.

5008 0x00001390 ERROR_SHUTDOWN_CLUSTER The cluster is being shut down.

5009 0x00001391 ERROR_CANT_EVICT_ACTIVE_NODE A cluster node cannot be evicted from the cluster

unless the node is down.

5010 0x00001392 ERROR_OBJECT_ALREADY_EXISTS The object already exists.

5011 0x00001393 ERROR_OBJECT_IN_LIST The object is already in the list.

5012 0x00001394 ERROR_GROUP_NOT_AVAILABLE The cluster group is not available for any new

requests.

5013 0x00001395 ERROR_GROUP_NOT_FOUND The cluster group could not be found.

5014 0x00001396 ERROR_GROUP_NOT_ONLINE The operation could not be completed because

the cluster group is not online.

5015 0x00001397 ERROR_HOST_NODE_NOT_RESOURCE_OWNE

The cluster node is not the owner of the resource.

5016 0x00001398 ERROR_HOST_NODE_NOT_GROUP_OWNER The cluster node is not the owner of the group.

5017 0x00001399 ERROR_RESMON_CREATE_FAILED The cluster resource could not be created in the

specified resource monitor.

5018 0x0000139A ERROR_RESMON_ONLINE_FAILED The cluster resource could not be brought online

by the resource monitor.

5019 0x0000139B ERROR_RESOURCE_ONLINE The operation could not be completed because

the cluster resource is online.

5020 0x0000139C ERROR_QUORUM_RESOURCE The cluster resource could not be deleted or

brought offline because it is the quorum resource.

5021 0x0000139D ERROR_NOT_QUORUM_CAPABLE The cluster could not make the specified resource

a quorum resource because it is not capable of

being a quorum resource.

5022 0x0000139E ERROR_CLUSTER_SHUTTING_DOWN The cluster software is shutting down.

5023 0x0000139F ERROR_INVALID_STATE The group or resource is not in the correct state to

perform the requested operation.

5024 0x000013A0 ERROR_RESOURCE_PROPERTIES_STORED The properties were stored but not all changes

will take effect until the next time the resource is

brought online.

5025 0x000013A1 ERROR_NOT_QUORUM_CLASS The cluster could not make the specified resource

a quorum resource because it does not belong to

a shared storage class.

5026 0x000013A2 ERROR_CORE_RESOURCE The cluster resource could not be deleted since it

is a core resource.

5027 0x000013A3 ERROR_QUORUM_RESOURCE_ONLINE_FAILED The quorum resource failed to come online.

5028 0x000013A4 ERROR_QUORUMLOG_OPEN_FAILED The quorum log could not be created or mounted

successfully.

5029 0x000013A5 ERROR_CLUSTERLOG_CORRUPT The cluster log is corrupt.

5030 0x000013A6 ERROR_CLUSTERLOG_RECORD_EXCEEDS_MA

XSIZE

The record could not be written to the cluster log

since it exceeds the maximum size.

5031 0x000013A7 ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE The cluster log exceeds its maximum size.

5032 0x000013A8 ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUN

No checkpoint record was found in the cluster log.

5033 0x000013A9 ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE The minimum required disk space needed for

logging is not available.

5034 0x000013AA ERROR_QUORUM_OWNER_ALIVE The cluster node failed to take control of the

quorum resource because the resource is owned

by another active node.

5035 0x000013AB ERROR_NETWORK_NOT_AVAILABLE A cluster network is not available for this

operation.

5036 0x000013AC ERROR_NODE_NOT_AVAILABLE A cluster node is not available for this operation.

Appendix

Beckhoff Device Manager 117Version: 4.9

Error Description

decimal Hexadecimal Name

5037 0x000013AD ERROR_ALL_NODES_NOT_AVAILABLE All cluster nodes must be running to perform this

operation.

5038 0x000013AE ERROR_RESOURCE_FAILED A cluster resource failed.

5039 0x000013AF ERROR_CLUSTER_INVALID_NODE The cluster node is not valid.

5040 0x000013B0 ERROR_CLUSTER_NODE_EXISTS The cluster node already exists.

5041 0x000013B1 ERROR_CLUSTER_JOIN_IN_PROGRESS A node is in the process of joining the cluster.

5042 0x000013B2 ERROR_CLUSTER_NODE_NOT_FOUND The cluster node was not found.

5043 0x000013B3 ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND The cluster local node information was not found.

5044 0x000013B4 ERROR_CLUSTER_NETWORK_EXISTS The cluster network already exists.

5045 0x000013B5 ERROR_CLUSTER_NETWORK_NOT_FOUND The cluster network was not found.

5046 0x000013B6 ERROR_CLUSTER_NETINTERFACE_EXISTS The cluster network interface already exists.

5047 0x000013B7 ERROR_CLUSTER_NETINTERFACE_NOT_FOUN

The cluster network interface was not found.

5048 0x000013B8 ERROR_CLUSTER_INVALID_REQUEST The cluster request is not valid for this object.

5049 0x000013B9 ERROR_CLUSTER_INVALID_NETWORK_PROVI

DER

The cluster network provider is not valid.

5050 0x000013BA ERROR_CLUSTER_NODE_DOWN The cluster node is down.

5051 0x000013BB ERROR_CLUSTER_NODE_UNREACHABLE The cluster node is not reachable.

5052 0x000013BC ERROR_CLUSTER_NODE_NOT_MEMBER The cluster node is not a member of the cluster.

5053 0x000013BD ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS A cluster join operation is not in progress.

5054 0x000013BE ERROR_CLUSTER_INVALID_NETWORK The cluster network is not valid.

5056 0x000013C0 ERROR_CLUSTER_NODE_UP The cluster node is up.

5057 0x000013C1 ERROR_CLUSTER_IPADDR_IN_USE The cluster IP address is already in use.

5058 0x000013C2 ERROR_CLUSTER_NODE_NOT_PAUSED The cluster node is not paused.

5059 0x000013C3 ERROR_CLUSTER_NO_SECURITY_CONTEXT No cluster security context is available.

5060 0x000013C4 ERROR_CLUSTER_NETWORK_NOT_INTERNAL The cluster network is not configured for internal

cluster communication.

5061 0x000013C5 ERROR_CLUSTER_NODE_ALREADY_UP The cluster node is already up.

5062 0x000013C6 ERROR_CLUSTER_NODE_ALREADY_DOWN The cluster node is already down.

5063 0x000013C7 ERROR_CLUSTER_NETWORK_ALREADY_ONLI

The cluster network is already online.

5064 0x000013C8 ERROR_CLUSTER_NETWORK_ALREADY_OFFLI

The cluster network is already offline.

5065 0x000013C9 ERROR_CLUSTER_NODE_ALREADY_MEMBER The cluster node is already a member of the

cluster.

5066 0x000013CA ERROR_CLUSTER_LAST_INTERNAL_NETWORK The cluster network is the only one configured for

internal cluster communication between two or

more active cluster nodes. The internal

communication capability cannot be removed

from the network.

5067 0x000013CB ERROR_CLUSTER_NETWORK_HAS_DEPENDEN

One or more cluster resources depend on the

network to provide service to clients. The client

access capability cannot be removed from the

network.

5068 0x000013CC ERROR_INVALID_OPERATION_ON_QUORUM This operation cannot be performed on the cluster

resource as it the quorum resource. You may not

bring the quorum resource offline or modify its

possible owners list.

5069 0x000013CD ERROR_DEPENDENCY_NOT_ALLOWED The cluster quorum resource is not allowed to

have any dependencies.

5070 0x000013CE ERROR_CLUSTER_NODE_PAUSED The cluster node is paused.

5071 0x000013CF ERROR_NODE_CANT_HOST_RESOURCE The cluster resource cannot be brought online.

The owner node cannot run this resource.

5072 0x000013D0 ERROR_CLUSTER_NODE_NOT_READY The cluster node is not ready to perform the

requested operation.

5073 0x000013D1 ERROR_CLUSTER_NODE_SHUTTING_DOWN The cluster node is shutting down.

5074 0x000013D2 ERROR_CLUSTER_JOIN_ABORTED The cluster join operation was aborted.

5075 0x000013D3 ERROR_CLUSTER_INCOMPATIBLE_VERSIONS The cluster join operation failed due to

incompatible software versions between the

joining node and its sponsor.

5076 0x000013D4 ERROR_CLUSTER_MAXNUM_OF_RESOURCES_

EXCEEDED

This resource cannot be created because the

cluster has reached the limit on the number of

resources it can monitor.

Appendix

Beckhoff Device Manager118 Version: 4.9

Error Description

decimal Hexadecimal Name

5077 0x000013D5 ERROR_CLUSTER_SYSTEM_CONFIG_CHANGE

The system configuration changed during the

cluster join or form operation. The join or form

operation was aborted.

5078 0x000013D6 ERROR_CLUSTER_RESOURCE_TYPE_NOT_FO

UND

The specified resource type was not found.

5079 0x000013D7 ERROR_CLUSTER_RESTYPE_NOT_SUPPORTE

The specified node does not support a resource

of this type. This may be due to version

inconsistencies or due to the absence of the

resource DLL on this node.

5080 0x000013D8 ERROR_CLUSTER_RESNAME_NOT_FOUND The specified resource name is supported by this

resource DLL. This may be due to a bad (or

changed) name supplied to the resource DLL.

5081 0x000013D9 ERROR_CLUSTER_NO_RPC_PACKAGES_REGIS

TERED

No authentication package could be registered

with the RPC server.

5082 0x000013DA ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST You cannot bring the group online because the

owner of the group is not in the preferred list for

the group. To change the owner node for the

group, move the group.

5083 0x000013DB ERROR_CLUSTER_DATABASE_SEQMISMATCH The join operation failed because the cluster

database sequence number has changed or is

incompatible with the locker node. This may

happen during a join operation if the cluster

database was changing during the join.

5084 0x000013DC ERROR_RESMON_INVALID_STATE The resource monitor will not allow the fail

operation to be performed while the resource is in

its current state. This may happen if the resource

is in a pending state.

5085 0x000013DD ERROR_CLUSTER_GUM_NOT_LOCKER A non locker code got a request to reserve the

lock for making global updates.

5086 0x000013DE ERROR_QUORUM_DISK_NOT_FOUND The quorum disk could not be located by the

cluster service.

5087 0x000013DF ERROR_DATABASE_BACKUP_CORRUPT The backup up cluster database is possibly

corrupt.

5088 0x000013E0 ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_

ROOT

A DFS root already exists in this cluster node.

5089 0x000013E1 ERROR_RESOURCE_PROPERTY_UNCHANGEA

BLE

An attempt to modify a resource property failed

because it conflicts with another existing property.

5890 0x00001702 ERROR_CLUSTER_MEMBERSHIP_INVALID_STA

An operation was attempted that is incompatible

with the current membership state of the node.

5891 0x00001703 ERROR_CLUSTER_QUORUMLOG_NOT_FOUND The quorum resource does not contain the

quorum log.

5892 0x00001704 ERROR_CLUSTER_MEMBERSHIP_HALT The membership engine requested shutdown of

the cluster service on this node.

5893 0x00001705 ERROR_CLUSTER_INSTANCE_ID_MISMATCH The join operation failed because the cluster

instance ID of the joining node does not match

the cluster instance ID of the sponsor node.

5894 0x00001706 ERROR_CLUSTER_NETWORK_NOT_FOUND_FO

R_IP

A matching network for the specified IP address

could not be found. Please also specify a subnet

mask and a cluster network.

5895 0x00001707 ERROR_CLUSTER_PROPERTY_DATA_TYPE_MI

SMATCH

The actual data type of the property did not match

the expected data type of the property.

5896 0x00001708 ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP The cluster node was evicted from the cluster

successfully. The node was not cleaned up

because it does not support the evict cleanup

functionality.

Appendix

Beckhoff Device Manager 119Version: 4.9

Error Description

decimal Hexadecimal Name

6000 0x00001770 ERROR_ENCRYPTION_FAILED The specified file could not be encrypted.

6001 0x00001771 ERROR_DECRYPTION_FAILED The specified file could not be decrypted.

6002 0x00001772 ERROR_FILE_ENCRYPTED The specified file is encrypted and the user does

not have the ability to decrypt it.

6003 0x00001773 ERROR_NO_RECOVERY_POLICY There is no valid encryption recovery policy

configured for this system.

6004 0x00001774 ERROR_NO_EFS The required encryption driver is not loaded for

this system.

6005 0x00001775 ERROR_WRONG_EFS The file was encrypted with a different encryption

driver than is currently loaded.

6006 0x00001776 ERROR_NO_USER_KEYS There are no EFS keys defined for the user.

6007 0x00001777 ERROR_FILE_NOT_ENCRYPTED The specified file is not encrypted.

6008 0x00001778 ERROR_NOT_EXPORT_FORMAT The specified file is not in the defined EFS export

format.

6009 0x00001779 ERROR_FILE_READ_ONLY The specified file is read only.

6010 0x0000177A ERROR_DIR_EFS_DISALLOWED The directory has been disabled for encryption.

6011 0x0000177B ERROR_EFS_SERVER_NOT_TRUSTED The server is not trusted for remote encryption

operation.

6012 0x0000177C ERROR_BAD_RECOVERY_POLICY Recovery policy configured for this system

contains invalid recovery certificate.

6013 0x0000177D ERROR_EFS_ALG_BLOB_TOO_BIG The encryption algorithm used on the source file

needs a bigger key buffer than the one on the

destination file.

6014 0x0000177E ERROR_VOLUME_NOT_SUPPORT_EFS The disk partition does not support file encryption.

6118 0x000017E6 ERROR_NO_BROWSER_SERVERS_FOUND The list of servers for this workgroup is not

currently available.

6200 0x00001838 SCHED_E_SERVICE_NOT_LOCALSYSTEM The Task Scheduler service must be configured

to run in the System account to function properly.

Individual tasks may be configured to run in other

accounts.

7001 0x00001B59 ERROR_CTX_WINSTATION_NAME_INVALID The specified session name is invalid.

7002 0x00001B5A ERROR_CTX_INVALID_PD The specified protocol driver is invalid.

7003 0x00001B5B ERROR_CTX_PD_NOT_FOUND The specified protocol driver was not found in the

system path.

7004 0x00001B5C ERROR_CTX_WD_NOT_FOUND The specified terminal connection driver was not

found in the system path.

7005 0x00001B5D ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENT

A registry key for event logging could not be

created for this session.

7006 0x00001B5E ERROR_CTX_SERVICE_NAME_COLLISION A service with the same name already exists on

the system.

7007 0x00001B5F ERROR_CTX_CLOSE_PENDING A close operation is pending on the session.

7008 0x00001B60 ERROR_CTX_NO_OUTBUF There are no free output buffers available.

7009 0x00001B61 ERROR_CTX_MODEM_INF_NOT_FOUND The MODEM.INF file was not found.

7010 0x00001B62 ERROR_CTX_INVALID_MODEMNAME The modem name was not found in MODEM.INF.

7011 0x00001B63 ERROR_CTX_MODEM_RESPONSE_ERROR The modem did not accept the command sent to

it. Verify that the configured modem name

matches the attached modem.

7012 0x00001B64 ERROR_CTX_MODEM_RESPONSE_TIMEOUT The modem did not respond to the command sent

to it. Verify that the modem is properly cabled and

powered on.

7013 0x00001B65 ERROR_CTX_MODEM_RESPONSE_NO_CARRIE

Carrier detect has failed or carrier has been

dropped due to disconnect.

7014 0x00001B66 ERROR_CTX_MODEM_RESPONSE_NO_DIALTO

Dial tone not detected within the required time.

Verify that the phone cable is properly attached

and functional.

7015 0x00001B67 ERROR_CTX_MODEM_RESPONSE_BUSY Busy signal detected at remote site on callback.

7016 0x00001B68 ERROR_CTX_MODEM_RESPONSE_VOICE Voice detected at remote site on callback.

7017 0x00001B69 ERROR_CTX_TD_ERROR Transport driver error

7022 0x00001B6E ERROR_CTX_WINSTATION_NOT_FOUND The specified session cannot be found.

7023 0x00001B6F ERROR_CTX_WINSTATION_ALREADY_EXISTS The specified session name is already in use.

7024 0x00001B70 ERROR_CTX_WINSTATION_BUSY The requested operation cannot be completed

because the terminal connection is currently busy

processing a connect, disconnect, reset, or delete

operation.

Appendix

Beckhoff Device Manager120 Version: 4.9

Error Description

decimal Hexadecimal Name

7025 0x00001B71 ERROR_CTX_BAD_VIDEO_MODE An attempt has been made to connect to a

session whose video mode is not supported by

the current client.

7035 0x00001B7B ERROR_CTX_GRAPHICS_INVALID The application attempted to enable DOS

graphics mode. DOS graphics mode is not

supported.

7037 0x00001B7D ERROR_CTX_LOGON_DISABLED Your interactive logon privilege has been

disabled. Please contact your administrator.

7038 0x00001B7E ERROR_CTX_NOT_CONSOLE The requested operation can be performed only

on the system console. This is most often the

result of a driver or system DLL requiring direct

console access.

7040 0x00001B80 ERROR_CTX_CLIENT_QUERY_TIMEOUT The client failed to respond to the server connect

message.

7041 0x00001B81 ERROR_CTX_CONSOLE_DISCONNECT Disconnecting the console session is not

supported.

7042 0x00001B82 ERROR_CTX_CONSOLE_CONNECT Reconnecting a disconnected session to the

console is not supported.

7044 0x00001B84 ERROR_CTX_SHADOW_DENIED The request to control another session remotely

was denied.

7045 0x00001B85 ERROR_CTX_WINSTATION_ACCESS_DENIED The requested session access is denied.

7049 0x00001B89 ERROR_CTX_INVALID_WD The specified terminal connection driver is invalid.

7050 0x00001B8A ERROR_CTX_SHADOW_INVALID The requested session cannot be controlled

remotely. This may be because the session is

disconnected or does not currently have a user

logged on.

7051 0x00001B8B ERROR_CTX_SHADOW_DISABLED The requested session is not configured to allow

remote control.

7052 0x00001B8C ERROR_CTX_CLIENT_LICENSE_IN_USE Your request to connect to this Terminal Server

has been rejected. Your Terminal Server client

license number is currently being used by another

user. Please call your system administrator to

obtain a unique license number.

7053 0x00001B8D ERROR_CTX_CLIENT_LICENSE_NOT_SET Your request to connect to this Terminal Server

has been rejected. Your Terminal Server client

license number has not been entered for this copy

of the Terminal Server client. Please contact your

system administrator.

7054 0x00001B8E ERROR_CTX_LICENSE_NOT_AVAILABLE The system has reached its licensed logon limit.

Please try again later.

7055 0x00001B8F ERROR_CTX_LICENSE_CLIENT_INVALID The client you are using is not licensed to use this

system. Your logon request is denied.

7056 0x00001B90 ERROR_CTX_LICENSE_EXPIRED The system license has expired. Your logon

request is denied.

7057 0x00001B91 ERROR_CTX_SHADOW_NOT_RUNNING Remote control could not be terminated because

the specified session is not currently being

remotely controlled.

Appendix

Beckhoff Device Manager 121Version: 4.9

Error Description

decimal Hexadecimal Name

8001 0x00001F41 FRS_ERR_INVALID_API_SEQUENCE The file replication service API was called

incorrectly.

8002 0x00001F42 FRS_ERR_STARTING_SERVICE The file replication service cannot be started.

8003 0x00001F43 FRS_ERR_STOPPING_SERVICE The file replication service cannot be stopped.

8004 0x00001F44 FRS_ERR_INTERNAL_API The file replication service API terminated the

request. The event log may have more

information.

8005 0x00001F45 FRS_ERR_INTERNAL The file replication service terminated the request.

The event log may have more information.

8006 0x00001F46 FRS_ERR_SERVICE_COMM The file replication service cannot be contacted.

The event log may have more information.

8007 0x00001F47 FRS_ERR_INSUFFICIENT_PRIV The file replication service cannot satisfy the

request because the user has insufficient

privileges. The event log may have more

information.

8008 0x00001F48 FRS_ERR_AUTHENTICATION The file replication service cannot satisfy the

request because authenticated RPC is not

available. The event log may have more

information.

8009 0x00001F49 FRS_ERR_PARENT_INSUFFICIENT_PRIV The file replication service cannot satisfy the

request because the user has insufficient

privileges on the domain controller. The event log

may have more information.

8010 0x00001F4A FRS_ERR_PARENT_AUTHENTICATION The file replication service cannot satisfy the

request because authenticated RPC is not

available on the domain controller. The event log

may have more information.

8011 0x00001F4B FRS_ERR_CHILD_TO_PARENT_COMM The file replication service cannot communicate

with the file replication service on the domain

controller. The event log may have more

information.

8012 0x00001F4C FRS_ERR_PARENT_TO_CHILD_COMM The file replication service on the domain

controller cannot communicate with the file

replication service on this computer. The event

log may have more information.

8013 0x00001F4D FRS_ERR_SYSVOL_POPULATE The file replication service cannot populate the

system volume because of an internal error. The

event log may have more information.

8014 0x00001F4E FRS_ERR_SYSVOL_POPULATE_TIMEOUT The file replication service cannot populate the

system volume because of an internal timeout.

The event log may have more information.

8015 0x00001F4F FRS_ERR_SYSVOL_IS_BUSY The file replication service cannot process the

request. The system volume is busy with a

previous request.

8016 0x00001F50 FRS_ERR_SYSVOL_DEMOTE The file replication service cannot stop replicating

the system volume because of an internal error.

The event log may have more information.

8017 0x00001F51 FRS_ERR_INVALID_SERVICE_PARAMETER The file replication service detected an invalid

parameter.

8200 0x00002008 ERROR_DS_NOT_INSTALLED An error occurred while installing the directory

service. For more information, see the event log.

8201 0x00002009 ERROR_DS_MEMBERSHIP_EVALUATED_LOCAL

The directory service evaluated group

memberships locally.

8202 0x0000200A ERROR_DS_NO_ATTRIBUTE_OR_VALUE The specified directory service attribute or value

does not exist.

8203 0x0000200B ERROR_DS_INVALID_ATTRIBUTE_SYNTAX The attribute syntax specified to the directory

service is invalid.

8204 0x0000200C ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED The attribute type specified to the directory

service is not defined.

8205 0x0000200D ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS The specified directory service attribute or value

already exists.

8206 0x0000200E ERROR_DS_BUSY The directory service is busy.

8207 0x0000200F ERROR_DS_UNAVAILABLE The directory service is unavailable.

8208 0x00002010 ERROR_DS_NO_RIDS_ALLOCATED The directory service was unable to allocate a

relative identifier.

8209 0x00002011 ERROR_DS_NO_MORE_RIDS The directory service has exhausted the pool of

relative identifiers.

Appendix

Beckhoff Device Manager122 Version: 4.9

Error Description

decimal Hexadecimal Name

8210 0x00002012 ERROR_DS_INCORRECT_ROLE_OWNER The requested operation could not be performed

because the directory service is not the master for

that type of operation.

8211 0x00002013 ERROR_DS_RIDMGR_INIT_ERROR The directory service was unable to initialize the

subsystem that allocates relative identifiers.

8212 0x00002014 ERROR_DS_OBJ_CLASS_VIOLATION The requested operation did not satisfy one or

more constraints associated with the class of the

object.

8213 0x00002015 ERROR_DS_CANT_ON_NON_LEAF The directory service can perform the requested

operation only on a leaf object.

8214 0x00002016 ERROR_DS_CANT_ON_RDN The directory service cannot perform the

requested operation on the RDN attribute of an

object.

8215 0x00002017 ERROR_DS_CANT_MOD_OBJ_CLASS The directory service detected an attempt to

modify the object class of an object.

8216 0x00002018 ERROR_DS_CROSS_DOM_MOVE_ERROR The requested cross-domain move operation

could not be performed.

8217 0x00002019 ERROR_DS_GC_NOT_AVAILABLE Unable to contact the global catalog server.

8218 0x0000201A ERROR_SHARED_POLICY The policy object is shared and can only be

modified at the root.

8219 0x0000201B ERROR_POLICY_OBJECT_NOT_FOUND The policy object does not exist.

8220 0x0000201C ERROR_POLICY_ONLY_IN_DS The requested policy information is only in the

directory service.

8221 0x0000201D ERROR_PROMOTION_ACTIVE A domain controller promotion is currently active.

8222 0x0000201E ERROR_NO_PROMOTION_ACTIVE A domain controller promotion is not currently

active

8224 0x00002020 ERROR_DS_OPERATIONS_ERROR An operations error occurred.

8225 0x00002021 ERROR_DS_PROTOCOL_ERROR A protocol error occurred.

8226 0x00002022 ERROR_DS_TIMELIMIT_EXCEEDED The time limit for this request was exceeded.

8227 0x00002023 ERROR_DS_SIZELIMIT_EXCEEDED The size limit for this request was exceeded.

8228 0x00002024 ERROR_DS_ADMIN_LIMIT_EXCEEDED The administrative limit for this request was

exceeded.

8229 0x00002025 ERROR_DS_COMPARE_FALSE The compare response was false.

8230 0x00002026 ERROR_DS_COMPARE_TRUE The compare response was true.

8231 0x00002027 ERROR_DS_AUTH_METHOD_NOT_SUPPORTED The requested authentication method is not

supported by the server.

8232 0x00002028 ERROR_DS_STRONG_AUTH_REQUIRED A more secure authentication method is required

for this server.

8233 0x00002029 ERROR_DS_INAPPROPRIATE_AUTH Inappropriate authentication.

8234 0x0000202A ERROR_DS_AUTH_UNKNOWN The authentication mechanism is unknown.

8235 0x0000202B ERROR_DS_REFERRAL A referral was returned from the server.

8236 0x0000202C ERROR_DS_UNAVAILABLE_CRIT_EXTENSION The server does not support the requested critical

extension.

8237 0x0000202D ERROR_DS_CONFIDENTIALITY_REQUIRED This request requires a secure connection.

8238 0x0000202E ERROR_DS_INAPPROPRIATE_MATCHING Inappropriate matching.

8239 0x0000202F ERROR_DS_CONSTRAINT_VIOLATION A constraint violation occurred.

8240 0x00002030 ERROR_DS_NO_SUCH_OBJECT There is no such object on the server.

8241 0x00002031 ERROR_DS_ALIAS_PROBLEM There is an alias problem.

8242 0x00002032 ERROR_DS_INVALID_DN_SYNTAX An invalid dn syntax has been specified.

8243 0x00002033 ERROR_DS_IS_LEAF The object is a leaf object.

8244 0x00002034 ERROR_DS_ALIAS_DEREF_PROBLEM There is an alias dereferencing problem.

8245 0x00002035 ERROR_DS_UNWILLING_TO_PERFORM The server is unwilling to process the request.

8246 0x00002036 ERROR_DS_LOOP_DETECT A loop has been detected.

8247 0x00002037 ERROR_DS_NAMING_VIOLATION There is a naming violation.

8248 0x00002038 ERROR_DS_OBJECT_RESULTS_TOO_LARGE The result set is too large.

8249 0x00002039 ERROR_DS_AFFECTS_MULTIPLE_DSAS The operation affects multiple DSAs

8250 0x0000203A ERROR_DS_SERVER_DOWN The server is not operational.

8251 0x0000203B ERROR_DS_LOCAL_ERROR A local error has occurred.

8252 0x0000203C ERROR_DS_ENCODING_ERROR An encoding error has occurred.

8253 0x0000203D ERROR_DS_DECODING_ERROR A decoding error has occurred.

8254 0x0000203E ERROR_DS_FILTER_UNKNOWN The search filter cannot be recognized.

Appendix

Beckhoff Device Manager 123Version: 4.9

Error Description

decimal Hexadecimal Name

8255 0x0000203F ERROR_DS_PARAM_ERROR One or more parameters are illegal.

8256 0x00002040 ERROR_DS_NOT_SUPPORTED The specified method is not supported.

8257 0x00002041 ERROR_DS_NO_RESULTS_RETURNED No results were returned.

8258 0x00002042 ERROR_DS_CONTROL_NOT_FOUND The specified control is not supported by the

server.

8259 0x00002043 ERROR_DS_CLIENT_LOOP A referral loop was detected by the client.

8260 0x00002044 ERROR_DS_REFERRAL_LIMIT_EXCEEDED The preset referral limit was exceeded.

8261 0x00002045 ERROR_DS_SORT_CONTROL_MISSING The search requires a SORT control.

8262 0x00002046 ERROR_DS_OFFSET_RANGE_ERROR The search results exceed the offset range

specified.

8301 0x0000206D ERROR_DS_ROOT_MUST_BE_NC The root object must be the head of a naming

context. The root object cannot have an

instantiated parent.

8302 0x0000206E ERROR_DS_ADD_REPLICA_INHIBITED The add replica operation cannot be performed.

The naming context must be writable in order to

create the replica.

8303 0x0000206F ERROR_DS_ATT_NOT_DEF_IN_SCHEMA A reference to an attribute that is not defined in

the schema occurred.

8304 0x00002070 ERROR_DS_MAX_OBJ_SIZE_EXCEEDED The maximum size of an object has been

exceeded.

8305 0x00002071 ERROR_DS_OBJ_STRING_NAME_EXISTS An attempt was made to add an object to the

directory with a name that is already in use.

8306 0x00002072 ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA An attempt was made to add an object of a class

that does not have an RDN defined in the

schema.

8307 0x00002073 ERROR_DS_RDN_DOESNT_MATCH_SCHEMA An attempt was made to add an object using an

RDN that is not the RDN defined in the schema.

8308 0x00002074 ERROR_DS_NO_REQUESTED_ATTS_FOUND None of the requested attributes were found on

the objects.

8309 0x00002075 ERROR_DS_USER_BUFFER_TO_SMALL The user buffer is too small.

8310 0x00002076 ERROR_DS_ATT_IS_NOT_ON_OBJ The attribute specified in the operation is not

present on the object.

8311 0x00002077 ERROR_DS_ILLEGAL_MOD_OPERATION Illegal modify operation. Some aspect of the

modification is not permitted.

8312 0x00002078 ERROR_DS_OBJ_TOO_LARGE The specified object is too large.

8313 0x00002079 ERROR_DS_BAD_INSTANCE_TYPE The specified instance type is not valid.

8314 0x0000207A ERROR_DS_MASTERDSA_REQUIRED The operation must be performed at a master

DSA.

8315 0x0000207B ERROR_DS_OBJECT_CLASS_REQUIRED The object class attribute must be specified.

8316 0x0000207C ERROR_DS_MISSING_REQUIRED_ATT A required attribute is missing.

8317 0x0000207D ERROR_DS_ATT_NOT_DEF_FOR_CLASS An attempt was made to modify an object to

include an attribute that is not legal for its class

8318 0x0000207E ERROR_DS_ATT_ALREADY_EXISTS The specified attribute is already present on the

object.

8320 0x00002080 ERROR_DS_CANT_ADD_ATT_VALUES The specified attribute is not present, or has no

values.

8321 0x00002081 ERROR_DS_SINGLE_VALUE_CONSTRAINT Multiple values were specified for an attribute that

can have only one value.

8322 0x00002082 ERROR_DS_RANGE_CONSTRAINT A value for the attribute was not in the acceptable

range of values.

8323 0x00002083 ERROR_DS_ATT_VAL_ALREADY_EXISTS The specified value already exists.

8324 0x00002084 ERROR_DS_CANT_REM_MISSING_ATT The attribute cannot be removed because it is not

present on the object.

8325 0x00002085 ERROR_DS_CANT_REM_MISSING_ATT_VAL The attribute value cannot be removed because it

is not present on the object.

8326 0x00002086 ERROR_DS_ROOT_CANT_BE_SUBREF The specified root object cannot be a subref.

8327 0x00002087 ERROR_DS_NO_CHAINING Chaining is not permitted.

8328 0x00002088 ERROR_DS_NO_CHAINED_EVAL Chained evaluation is not permitted.

8329 0x00002089 ERROR_DS_NO_PARENT_OBJECT The operation could not be performed because

the object's parent is either uninstantiated or

deleted.

8330 0x0000208A ERROR_DS_PARENT_IS_AN_ALIAS Having a parent that is an alias is not permitted.

Aliases are leaf objects.

Appendix

Beckhoff Device Manager124 Version: 4.9

Error Description

decimal Hexadecimal Name

8331 0x0000208B ERROR_DS_CANT_MIX_MASTER_AND_REPS The object and parent must be of the same type,

either both masters or both replicas.

8332 0x0000208C ERROR_DS_CHILDREN_EXIST The operation cannot be performed because child

objects exist. This operation can only be

performed on a leaf object.

8333 0x0000208D ERROR_DS_OBJ_NOT_FOUND Directory object not found.

8334 0x0000208E ERROR_DS_ALIASED_OBJ_MISSING The aliased object is missing.

8335 0x0000208F ERROR_DS_BAD_NAME_SYNTAX The object name has bad syntax.

8336 0x00002090 ERROR_DS_ALIAS_POINTS_TO_ALIAS It is not permitted for an alias to refer to another

alias.

8337 0x00002091 ERROR_DS_CANT_DEREF_ALIAS The alias cannot be dereferenced.

8338 0x00002092 ERROR_DS_OUT_OF_SCOPE The operation is out of scope.

8339 0x00002093 ERROR_DS_OBJECT_BEING_REMOVED The operation cannot continue because the object

is in the process of being removed.

8340 0x00002094 ERROR_DS_CANT_DELETE_DSA_OBJ The DSA object cannot be deleted.

8341 0x00002095 ERROR_DS_GENERIC_ERROR A directory service error has occurred.

8342 0x00002096 ERROR_DS_DSA_MUST_BE_INT_MASTER The operation can only be performed on an

internal master DSA object.

8343 0x00002097 ERROR_DS_CLASS_NOT_DSA The object must be of class DSA.

8344 0x00002098 ERROR_DS_INSUFF_ACCESS_RIGHTS Insufficient access rights to perform the operation.

8345 0x00002099 ERROR_DS_ILLEGAL_SUPERIOR The object cannot be added because the parent

is not on the list of possible superiors.

8346 0x0000209A ERROR_DS_ATTRIBUTE_OWNED_BY_SAM Access to the attribute is not permitted because

the attribute is owned by the Security Accounts

Manager (SAM).

8347 0x0000209B ERROR_DS_NAME_TOO_MANY_PARTS The name has too many parts.

8348 0x0000209C ERROR_DS_NAME_TOO_LONG The name is too long.

8349 0x0000209D ERROR_DS_NAME_VALUE_TOO_LONG The name value is too long.

8350 0x0000209E ERROR_DS_NAME_UNPARSEABLE The directory service encountered an error

parsing a name.

8351 0x0000209F ERROR_DS_NAME_TYPE_UNKNOWN The directory service cannot get the attribute type

for a name.

8352 0x000020A0 ERROR_DS_NOT_AN_OBJECT The name does not identify an object; the name

identifies a phantom.

8353 0x000020A1 ERROR_DS_SEC_DESC_TOO_SHORT The security descriptor is too short.

8354 0x000020A2 ERROR_DS_SEC_DESC_INVALID The security descriptor is invalid.

8355 0x000020A3 ERROR_DS_NO_DELETED_NAME Failed to create name for deleted object.

8356 0x000020A4 ERROR_DS_SUBREF_MUST_HAVE_PARENT The parent of a new subref must exist.

8357 0x000020A5 ERROR_DS_NCNAME_MUST_BE_NC The object must be a naming context.

8358 0x000020A6 ERROR_DS_CANT_ADD_SYSTEM_ONLY It is not permitted to add an attribute which is

owned by the system.

8359 0x000020A7 ERROR_DS_CLASS_MUST_BE_CONCRETE The class of the object must be structural; you

cannot instantiate an abstract class.

8360 0x000020A8 ERROR_DS_INVALID_DMD The schema object could not be found.

8361 0x000020A9 ERROR_DS_OBJ_GUID_EXISTS A local object with this GUID (dead or alive)

already exists.

8362 0x000020AA ERROR_DS_NOT_ON_BACKLINK The operation cannot be performed on a back

link.

8363 0x000020AB ERROR_DS_NO_CROSSREF_FOR_NC The cross reference for the specified naming

context could not be found.

8364 0x000020AC ERROR_DS_SHUTTING_DOWN The operation could not be performed because

the directory service is shutting down.

8365 0x000020AD ERROR_DS_UNKNOWN_OPERATION The directory service request is invalid.

8366 0x000020AE ERROR_DS_INVALID_ROLE_OWNER The role owner attribute could not be read.

8367 0x000020AF ERROR_DS_COULDNT_CONTACT_FSMO The requested FSMO operation failed. The

current FSMO holder could not be reached.

8368 0x000020B0 ERROR_DS_CROSS_NC_DN_RENAME Modification of a DN across a naming context is

not permitted.

8369 0x000020B1 ERROR_DS_CANT_MOD_SYSTEM_ONLY The attribute cannot be modified because it is

owned by the system.

8370 0x000020B2 ERROR_DS_REPLICATOR_ONLY Only the replicator can perform this function.

8371 0x000020B3 ERROR_DS_OBJ_CLASS_NOT_DEFINED The specified class is not defined.

Appendix

Beckhoff Device Manager 125Version: 4.9

Error Description

decimal Hexadecimal Name

8372 0x000020B4 ERROR_DS_OBJ_CLASS_NOT_SUBCLASS The specified class is not a subclass.

8373 0x000020B5 ERROR_DS_NAME_REFERENCE_INVALID The name reference is invalid.

8374 0x000020B6 ERROR_DS_CROSS_REF_EXISTS A cross reference already exists.

8375 0x000020B7 ERROR_DS_CANT_DEL_MASTER_CROSSREF It is not permitted to delete a master cross

reference.

8376 0x000020B8 ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD Subtree notifications are only supported on NC

heads.

8377 0x000020B9 ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX Notification filter is too complex.

8378 0x000020BA ERROR_DS_DUP_RDN Schema update failed: duplicate RDN.

8379 0x000020BB ERROR_DS_DUP_OID Schema update failed: duplicate OID

8380 0x000020BC ERROR_DS_DUP_MAPI_ID Schema update failed: duplicate MAPI identifier.

8381 0x000020BD ERROR_DS_DUP_SCHEMA_ID_GUID Schema update failed: duplicate schema-id GUID.

8382 0x000020BE ERROR_DS_DUP_LDAP_DISPLAY_NAME Schema update failed: duplicate LDAP display

name.

8383 0x000020BF ERROR_DS_SEMANTIC_ATT_TEST Schema update failed: range-lower less than

range upper

8384 0x000020C0 ERROR_DS_SYNTAX_MISMATCH Schema update failed: syntax mismatch

8385 0x000020C1 ERROR_DS_EXISTS_IN_MUST_HAVE Schema deletion failed: attribute is used in must-

contain

8386 0x000020C2 ERROR_DS_EXISTS_IN_MAY_HAVE Schema deletion failed: attribute is used in may-

contain

8387 0x000020C3 ERROR_DS_NONEXISTENT_MAY_HAVE Schema update failed: attribute in may-contain

does not exist

8388 0x000020C4 ERROR_DS_NONEXISTENT_MUST_HAVE Schema update failed: attribute in must-contain

does not exist

8389 0x000020C5 ERROR_DS_AUX_CLS_TEST_FAIL Schema update failed: class in aux-class list does

not exist or is not an auxiliary class

8390 0x000020C6 ERROR_DS_NONEXISTENT_POSS_SUP Schema update failed: class in poss-superiors

does not exist

8391 0x000020C7 ERROR_DS_SUB_CLS_TEST_FAIL Schema update failed: class in subclassof list

does not exist or does not satisfy hierarchy rules

8392 0x000020C8 ERROR_DS_BAD_RDN_ATT_ID_SYNTAX Schema update failed: Rdn-Att-Id has wrong

syntax

8393 0x000020C9 ERROR_DS_EXISTS_IN_AUX_CLS Schema deletion failed: class is used as auxiliary

class

8394 0x000020CA ERROR_DS_EXISTS_IN_SUB_CLS Schema deletion failed: class is used as sub class

8395 0x000020CB ERROR_DS_EXISTS_IN_POSS_SUP Schema deletion failed: class is used as poss

superior

8396 0x000020CC ERROR_DS_RECALCSCHEMA_FAILED Schema update failed in recalculating validation

cache.

8397 0x000020CD ERROR_DS_TREE_DELETE_NOT_FINISHED The tree deletion is not finished.

8398 0x000020CE ERROR_DS_CANT_DELETE The requested delete operation could not be

performed.

8399 0x000020CF ERROR_DS_ATT_SCHEMA_REQ_ID Cannot read the governs class identifier for the

schema record.

8400 0x000020D0 ERROR_DS_BAD_ATT_SCHEMA_SYNTAX The attribute schema has bad syntax.

8401 0x000020D1 ERROR_DS_CANT_CACHE_ATT The attribute could not be cached.

8402 0x000020D2 ERROR_DS_CANT_CACHE_CLASS The class could not be cached.

8403 0x000020D3 ERROR_DS_CANT_REMOVE_ATT_CACHE The attribute could not be removed from the

cache.

8404 0x000020D4 ERROR_DS_CANT_REMOVE_CLASS_CACHE The class could not be removed from the cache.

8405 0x000020D5 ERROR_DS_CANT_RETRIEVE_DN The distinguished name attribute could not be

read.

8406 0x000020D6 ERROR_DS_MISSING_SUPREF A required subref is missing.

8407 0x000020D7 ERROR_DS_CANT_RETRIEVE_INSTANCE The instance type attribute could not be retrieved.

8408 0x000020D8 ERROR_DS_CODE_INCONSISTENCY An internal error has occurred.

8409 0x000020D9 ERROR_DS_DATABASE_ERROR A database error has occurred.

8410 0x000020DA ERROR_DS_GOVERNSID_MISSING The attribute GOVERNSID is missing.

8411 0x000020DB ERROR_DS_MISSING_EXPECTED_ATT An expected attribute is missing.

8412 0x000020DC ERROR_DS_NCNAME_MISSING_CR_REF The specified naming context is missing a cross

reference.

8413 0x000020DD ERROR_DS_SECURITY_CHECKING_ERROR A security checking error has occurred.

Appendix

Beckhoff Device Manager126 Version: 4.9

Error Description

decimal Hexadecimal Name

8414 0x000020DE ERROR_DS_SCHEMA_NOT_LOADED The schema is not loaded.

8415 0x000020DF ERROR_DS_SCHEMA_ALLOC_FAILED Schema allocation failed. Please check if the

machine is running low on memory.

8416 0x000020E0 ERROR_DS_ATT_SCHEMA_REQ_SYNTAX Failed to obtain the required syntax for the

attribute schema.

8417 0x000020E1 ERROR_DS_GCVERIFY_ERROR The global catalog verification failed. The global

catalog is not available or does not support the

operation. Some part of the directory is currently

not available.

8418 0x000020E2 ERROR_DS_DRA_SCHEMA_MISMATCH The replication operation failed because of a

schema mismatch between the servers involved.

8419 0x000020E3 ERROR_DS_CANT_FIND_DSA_OBJ The DSA object could not be found.

8420 0x000020E4 ERROR_DS_CANT_FIND_EXPECTED_NC The naming context could not be found.

8421 0x000020E5 ERROR_DS_CANT_FIND_NC_IN_CACHE The naming context could not be found in the

cache.

8422 0x000020E6 ERROR_DS_CANT_RETRIEVE_CHILD The child object could not be retrieved.

8423 0x000020E7 ERROR_DS_SECURITY_ILLEGAL_MODIFY The modification was not permitted for security

reasons.

8424 0x000020E8 ERROR_DS_CANT_REPLACE_HIDDEN_REC The operation cannot replace the hidden record.

8425 0x000020E9 ERROR_DS_BAD_HIERARCHY_FILE The hierarchy file is invalid.

8426 0x000020EA ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED The attempt to build the hierarchy table failed.

8427 0x000020EB ERROR_DS_CONFIG_PARAM_MISSING The directory configuration parameter is missing

from the registry.

8428 0x000020EC ERROR_DS_COUNTING_AB_INDICES_FAILED The attempt to count the address book indices

failed.

8429 0x000020ED ERROR_DS_HIERARCHY_TABLE_MALLOC_FAIL

The allocation of the hierarchy table failed.

8430 0x000020EE ERROR_DS_INTERNAL_FAILURE The directory service encountered an internal

failure.

8431 0x000020EF ERROR_DS_UNKNOWN_ERROR The directory service encountered an unknown

failure.

8432 0x000020F0 ERROR_DS_ROOT_REQUIRES_CLASS_TOP A root object requires a class of 'top'.

8433 0x000020F1 ERROR_DS_REFUSING_FSMO_ROLES This directory server is shutting down, and cannot

take ownership of new floating single-master

operation roles.

8434 0x000020F2 ERROR_DS_MISSING_FSMO_SETTINGS The directory service is missing mandatory

configuration information, and is unable to

determine the ownership of floating single-master

operation roles.

8435 0x000020F3 ERROR_DS_UNABLE_TO_SURRENDER_ROLES The directory service was unable to transfer

ownership of one or more floating single-master

operation roles to other servers.

8436 0x000020F4 ERROR_DS_DRA_GENERIC The replication operation failed.

8437 0x000020F5 ERROR_DS_DRA_INVALID_PARAMETER An invalid parameter was specified for this

replication operation.

8438 0x000020F6 ERROR_DS_DRA_BUSY The directory service is too busy to complete the

replication operation at this time.

8439 0x000020F7 ERROR_DS_DRA_BAD_DN The distinguished name specified for this

replication operation is invalid.

8440 0x000020F8 ERROR_DS_DRA_BAD_NC The naming context specified for this replication

operation is invalid.

8441 0x000020F9 ERROR_DS_DRA_DN_EXISTS The distinguished name specified for this

replication operation already exists.

8442 0x000020FA ERROR_DS_DRA_INTERNAL_ERROR The replication system encountered an internal

error.

8443 0x000020FB ERROR_DS_DRA_INCONSISTENT_DIT The replication operation encountered a database

inconsistency.

8444 0x000020FC ERROR_DS_DRA_CONNECTION_FAILED The server specified for this replication operation

could not be contacted.

8445 0x000020FD ERROR_DS_DRA_BAD_INSTANCE_TYPE The replication operation encountered an object

with an invalid instance type.

8446 0x000020FE ERROR_DS_DRA_OUT_OF_MEM The replication operation failed to allocate

memory.

8447 0x000020FF ERROR_DS_DRA_MAIL_PROBLEM The replication operation encountered an error

with the mail system.

Appendix

Beckhoff Device Manager 127Version: 4.9

Error Description

decimal Hexadecimal Name

8448 0x00002100 ERROR_DS_DRA_REF_ALREADY_EXISTS The replication reference information for the

target server already exists.

8449 0x00002101 ERROR_DS_DRA_REF_NOT_FOUND The replication reference information for the

target server does not exist.

8450 0x00002102 ERROR_DS_DRA_OBJ_IS_REP_SOURCE The naming context cannot be removed because

it is replicated to another server.

8451 0x00002103 ERROR_DS_DRA_DB_ERROR The replication operation encountered a database

error.

8452 0x00002104 ERROR_DS_DRA_NO_REPLICA The naming context is in the process of being

removed or is not replicated from the specified

server.

8453 0x00002105 ERROR_DS_DRA_ACCESS_DENIED Replication access was denied.

8454 0x00002106 ERROR_DS_DRA_NOT_SUPPORTED The requested operation is not supported by this

version of the directory service.

8455 0x00002107 ERROR_DS_DRA_RPC_CANCELLED The replication remote procedure call was

cancelled.

8456 0x00002108 ERROR_DS_DRA_SOURCE_DISABLED The source server is currently rejecting replication

requests.

8457 0x00002109 ERROR_DS_DRA_SINK_DISABLED The destination server is currently rejecting

replication requests.

8458 0x0000210A ERROR_DS_DRA_NAME_COLLISION The replication operation failed due to a collision

of object names.

8459 0x0000210B ERROR_DS_DRA_SOURCE_REINSTALLED The replication source has been reinstalled.

8460 0x0000210C ERROR_DS_DRA_MISSING_PARENT The replication operation failed because a

required parent object is missing.

8461 0x0000210D ERROR_DS_DRA_PREEMPTED The replication operation was preempted.

8462 0x0000210E ERROR_DS_DRA_ABANDON_SYNC The replication synchronization attempt was

abandoned because of a lack of updates.

8463 0x0000210F ERROR_DS_DRA_SHUTDOWN The replication operation was terminated because

the system is shutting down.

8464 0x00002110 ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SE

The replication synchronization attempt failed as

the destination partial attribute set is not a subset

of source partial attribute set.

8465 0x00002111 ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLI

The replication synchronization attempt failed

because a master replica attempted to sync from

a partial replica.

8466 0x00002112 ERROR_DS_DRA_EXTN_CONNECTION_FAILED The server specified for this replication operation

was contacted, but that server was unable to

contact an additional server needed to complete

the operation.

8467 0x00002113 ERROR_DS_INSTALL_SCHEMA_MISMATCH The version of the Active Directory schema of the

source forest is not compatible with the version of

Active Directory on this computer. You must

upgrade the operating system on a domain

controller in the source forest before this

computer can be added as a domain controller to

that forest.

8468 0x00002114 ERROR_DS_DUP_LINK_ID Schema update failed: An attribute with the same

link identifier already exists.

8469 0x00002115 ERROR_DS_NAME_ERROR_RESOLVING Name translation: Generic processing error.

8470 0x00002116 ERROR_DS_NAME_ERROR_NOT_FOUND Name translation: Could not find the name or

insufficient right to see name.

8471 0x00002117 ERROR_DS_NAME_ERROR_NOT_UNIQUE Name translation: Input name mapped to more

than one output name.

8472 0x00002118 ERROR_DS_NAME_ERROR_NO_MAPPING Name translation: Input name found, but not the

associated output format.

8473 0x00002119 ERROR_DS_NAME_ERROR_DOMAIN_ONLY Name translation: Unable to resolve completely,

only the domain was found.

8474 0x0000211A ERROR_DS_NAME_ERROR_NO_SYNTACTICAL_

MAPPING

Name translation: Unable to perform purely

syntactical mapping at the client without going out

to the wire.

8475 0x0000211B ERROR_DS_CONSTRUCTED_ATT_MOD Modification of a constructed att is not allowed.

8476 0x0000211C ERROR_DS_WRONG_OM_OBJ_CLASS The OM-Object-Class specified is incorrect for an

attribute with the specified syntax.

8477 0x0000211D ERROR_DS_DRA_REPL_PENDING The replication request has been posted; waiting

for reply.

Appendix

Beckhoff Device Manager128 Version: 4.9

Error Description

decimal Hexadecimal Name

8478 0x0000211E ERROR_DS_DS_REQUIRED The requested operation requires a directory

service, and none was available.

8479 0x0000211F ERROR_DS_INVALID_LDAP_DISPLAY_NAME The LDAP display name of the class or attribute

contains non-ASCII characters.

8480 0x00002120 ERROR_DS_NON_BASE_SEARCH The requested search operation is only supported

for base searches.

8481 0x00002121 ERROR_DS_CANT_RETRIEVE_ATTS The search failed to retrieve attributes from the

database.

8482 0x00002122 ERROR_DS_BACKLINK_WITHOUT_LINK The schema update operation tried to add a

backward link attribute that has no corresponding

forward link.

8483 0x00002123 ERROR_DS_EPOCH_MISMATCH Source and destination of a cross domain move

do not agree on the object's epoch number. Either

source or destination does not have the latest

version of the object.

8484 0x00002124 ERROR_DS_SRC_NAME_MISMATCH Source and destination of a cross domain move

do not agree on the object's current name. Either

source or destination does not have the latest

version of the object.

8485 0x00002125 ERROR_DS_SRC_AND_DST_NC_IDENTICAL Source and destination of a cross domain move

operation are identical. Caller should use local

move operation instead of cross domain move

operation.

8486 0x00002126 ERROR_DS_DST_NC_MISMATCH Source and destination for a cross domain move

are not in agreement on the naming contexts in

the forest. Either source or destination does not

have the latest version of the Partitions container.

8487 0x00002127 ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC Destination of a cross domain move is not

authoritative for the destination naming context.

8488 0x00002128 ERROR_DS_SRC_GUID_MISMATCH Source and destination of a cross domain move

do not agree on the identity of the source object.

Either source or destination does not have the

latest version of the source object.

8489 0x00002129 ERROR_DS_CANT_MOVE_DELETED_OBJECT Object being moved across domains is already

known to be deleted by the destination server.

The source server does not have the latest

version of the source object.

8490 0x0000212A ERROR_DS_PDC_OPERATION_IN_PROGRESS Another operation which requires exclusive

access to the PDC PSMO is already in progress.

8491 0x0000212B ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD A cross domain move operation failed such that

the two versions of the moved object exist - one

each in the source and destination domains. The

destination object needs to be removed to restore

the system to a consistent state.

8492 0x0000212C ERROR_DS_ILLEGAL_XDOM_MOVE_OPERATIO

This object may not be moved across domain

boundaries either because cross domain moves

for this class are disallowed, or the object has

some special characteristics, eg: trust account or

restricted RID, which prevent its move.

8493 0x0000212D ERROR_DS_CANT_WITH_ACCT_GROUP_MEMB

ERSHPS

Can't move objects with memberships across

domain boundaries as once moved, this would

violate the membership conditions of the account

group. Remove the object from any account

group memberships and retry.

8494 0x0000212E ERROR_DS_NC_MUST_HAVE_NC_PARENT A naming context head must be the immediate

child of another naming context head, not of an

interior node.

8495 0x0000212F ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE The directory cannot validate the proposed

naming context name because it does not hold a

replica of the naming context above the proposed

naming context. Please ensure that the domain

naming master role is held by a server that is

configured as a global catalog server, and that the

server is up to date with its replication partners.

(Applies only to Windows 2000 Domain Naming

masters)

8496 0x00002130 ERROR_DS_DST_DOMAIN_NOT_NATIVE Destination domain must be in native mode.

Appendix

Beckhoff Device Manager 129Version: 4.9

Error Description

decimal Hexadecimal Name

8497 0x00002131 ERROR_DS_MISSING_INFRASTRUCTURE_CON

TAINER

The operation can not be performed because the

server does not have an infrastructure container

in the domain of interest.

8498 0x00002132 ERROR_DS_CANT_MOVE_ACCOUNT_GROUP Cross-domain move of non-empty account groups

is not allowed.

8499 0x00002133 ERROR_DS_CANT_MOVE_RESOURCE_GROUP Cross-domain move of non-empty resource

groups is not allowed.

Appendix

Beckhoff Device Manager130 Version: 4.9

Error Description

decimal Hexadecimal Name

8500 0x00002134 ERROR_DS_INVALID_SEARCH_FLAG The search flags for the attribute are invalid. The

ANR bit is valid only on attributes of Unicode or

Teletex strings.

8501 0x00002135 ERROR_DS_NO_TREE_DELETE_ABOVE_NC Tree deletions starting at an object which has an

NC head as a descendant are not allowed.

8502 0x00002136 ERROR_DS_COULDNT_LOCK_TREE_FOR_DELE

The directory service failed to lock a tree in

preparation for a tree deletion because the tree

was in use.

8503 0x00002137 ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FO

R_TREE_DELETE

The directory service failed to identify the list of

objects to delete while attempting a tree deletion.

8504 0x00002138 ERROR_DS_SAM_INIT_FAILURE Security Accounts Manager initialization failed

because of the following error: %1. Error Status:

0x%2. Click OK to shut down the system and

reboot into Directory Services Restore Mode.

Check the event log for detailed information.

8505 0x00002139 ERROR_DS_SENSITIVE_GROUP_VIOLATION Only an administrator can modify the membership

list of an administrative group.

8506 0x0000213A ERROR_DS_CANT_MOD_PRIMARYGROUPID Cannot change the primary group ID of a domain

controller account.

8507 0x0000213B ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD An attempt is made to modify the base schema.

8508 0x0000213C ERROR_DS_NONSAFE_SCHEMA_CHANGE Adding a new mandatory attribute to an existing

class, deleting a mandatory attribute from an

existing class, or adding an optional attribute to

the special class Top that is not a backlink

attribute (directly or through inheritance, for

example, by adding or deleting an auxiliary class)

is not allowed.

8509 0x0000213D ERROR_DS_SCHEMA_UPDATE_DISALLOWED Schema update is not allowed on this DC

because the DC is not the schema FSMO Role

Owner.

8510 0x0000213E ERROR_DS_CANT_CREATE_UNDER_SCHEMA An object of this class cannot be created under

the schema container. You can only create

attribute-schema and class-schema objects under

the schema container.

8511 0x0000213F ERROR_DS_INSTALL_NO_SRC_SCH_VERSION The replica/child install failed to get the

objectVersion attribute on the schema container

on the source DC. Either the attribute is missing

on the schema container or the credentials

supplied do not have permission to read it.

8512 0x00002140 ERROR_DS_INSTALL_NO_SCH_VERSION_IN_IN

IFILE

The replica/child install failed to read the

objectVersion attribute in the SCHEMA section of

the file schema.ini in the system32 directory.

8513 0x00002141 ERROR_DS_INVALID_GROUP_TYPE The specified group type is invalid.

8514 0x00002142 ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIX

EDDOMAIN

Cannot nest global groups in a mixed domain if

the group is security-enabled.

8515 0x00002143 ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXE

DDOMAIN

Cannot nest local groups in a mixed domain if the

group is security-enabled.

8516 0x00002144 ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_ME

MBER

A global group cannot have a local group as a

member.

8517 0x00002145 ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL

_MEMBER

A global group cannot have a universal group as

a member.

8518 0x00002146 ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_

MEMBER

A universal group cannot have a local group as a

member.

8519 0x00002147 ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOM

AIN_MEMBER

A global group cannot have a cross-domain

member.

8520 0x00002148 ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMA

IN_LOCAL_MEMBER

A local group cannot have another cross-domain

local group as a member.

8521 0x00002149 ERROR_DS_HAVE_PRIMARY_MEMBERS A group with primary members cannot change to

a security-disabled group.

8522 0x0000214A ERROR_DS_STRING_SD_CONVERSION_FAILED The schema cache load failed to convert the

string default SD on a class-schema object.

8523 0x0000214B ERROR_DS_NAMING_MASTER_GC Only DSAs configured to be Global Catalog

servers should be allowed to hold the Domain

Naming Master FSMO role. (Applies only to

Windows 2000 servers)

8524 0x0000214C ERROR_DS_LOOKUP_FAILURE The DSA operation is unable to proceed because

of a DNS lookup failure.

Appendix

Beckhoff Device Manager 131Version: 4.9

Error Description

decimal Hexadecimal Name

8525 0x0000214D ERROR_DS_COULDNT_UPDATE_SPNS While processing a change to the DNS Host

Name for an object, the Service Principal Name

values could not be kept in sync.

8526 0x0000214E ERROR_DS_CANT_RETRIEVE_SD The Security Descriptor attribute could not be

read.

8527 0x0000214F ERROR_DS_KEY_NOT_UNIQUE. The object requested was not found, but an object

with that key was found.

8528 0x00002150 ERROR_DS_WRONG_LINKED_ATT_SYNTAX The syntax of the linked attributed being added is

incorrect. Forward links can only have syntax

2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can

only have syntax 2.5.5.1.

8529 0x00002151 ERROR_DS_SAM_NEED_BOOTKEY_PASSWOR

Security Account Manager needs to get the boot

password.

8530 0x00002152 ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY Security Account Manager needs to get the boot

key from floppy disk.

8531 0x00002153 ERROR_DS_CANT_START Directory Service cannot start.

8532 0x00002154 ERROR_DS_INIT_FAILURE Directory Services could not start.

8533 0x00002155 ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTI

The connection between client and server

requires packet privacy or better.

8534 0x00002156 ERROR_DS_SOURCE_DOMAIN_IN_FOREST The source domain may not be in the same forest

as destination.

8535 0x00002157 ERROR_DS_DESTINATION_DOMAIN_NOT_IN_F

OREST

The destination domain must be in the forest.

8536 0x00002158 ERROR_DS_DESTINATION_AUDITING_NOT_EN

ABLED

The operation requires that destination domain

auditing be enabled.

8537 0x00002159 ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAI

The operation couldn't locate a DC for the source

domain.

8538 0x0000215A ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER The source object must be a group or user.

8539 0x0000215B ERROR_DS_SRC_SID_EXISTS_IN_FOREST The source object's SID already exists in

destination forest.

8540 0x0000215C ERROR_DS_SRC_AND_DST_OBJECT_CLASS_M

ISMATCH

The source and destination object must be of the

same type.

8541 0x0000215D ERROR_SAM_INIT_FAILURE Security Accounts Manager initialization failed

because of the following error: %1. Error Status:

0x%2. Click OK to shut down the system and

reboot into Safe Mode. Check the event log for

detailed information.

8542 0x0000215E ERROR_DS_DRA_SCHEMA_INFO_SHIP Schema information could not be included in the

replication request.

8543 0x0000215F ERROR_DS_DRA_SCHEMA_CONFLICT The replication operation could not be completed

due to a schema incompatibility.

8544 0x00002160 ERROR_DS_DRA_EARLIER_SCHEMA_CONLICT The replication operation could not be completed

due to a previous schema incompatibility.

8545 0x00002161 ERROR_DS_DRA_OBJ_NC_MISMATCH The replication update could not be applied

because either the source or the destination has

not yet received information regarding a recent

cross-domain move operation.

8546 0x00002162 ERROR_DS_NC_STILL_HAS_DSAS The requested domain could not be deleted

because there exist domain controllers that still

host this domain.

8547 0x00002163 ERROR_DS_GC_REQUIRED The requested operation can be performed only

on a global catalog server.

8548 0x00002164 ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONL

A local group can only be a member of other local

groups in the same domain.

8549 0x00002165 ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS Foreign security principals cannot be members of

universal groups.

8550 0x00002166 ERROR_DS_CANT_ADD_TO_GC The attribute is not allowed to be replicated to the

GC because of security reasons.

8551 0x00002167 ERROR_DS_NO_CHECKPOINT_WITH_PDC The checkpoint with the PDC could not be taken

because there are too many modifications being

processed currently.

8552 0x00002168 ERROR_DS_SOURCE_AUDITING_NOT_ENABLE

The operation requires that source domain

auditing be enabled.

8553 0x00002169 ERROR_DS_CANT_CREATE_IN_NONDOMAIN_N

Security principal objects can only be created

inside domain naming contexts.

Appendix

Beckhoff Device Manager132 Version: 4.9

Error Description

decimal Hexadecimal Name

8554 0x0000216A ERROR_DS_INVALID_NAME_FOR_SPN A Service Principal Name (SPN) could not be

constructed because the provided hostname is

not in the necessary format.

8555 0x0000216B ERROR_DS_FILTER_USES_CONTRUCTED_ATT

A Filter was passed that uses constructed

attributes.

8556 0x0000216C ERROR_DS_UNICODEPWD_NOT_IN_QUOTES The unicodePwd attribute value must be enclosed

in double quotes.

8557 0x0000216D ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXC

EEDED

Your computer could not be joined to the domain.

You have exceeded the maximum number of

computer accounts you are allowed to create in

this domain. Contact your system administrator to

have this limit reset or increased.

8558 0x0000216E ERROR_DS_MUST_BE_RUN_ON_DST_DC For security reasons, the operation must be run

on the destination DC.

8559 0x0000216F ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GRE

ATER

For security reasons, the source DC must be

NT4SP4 or greater.

8560 0x00002170 ERROR_DS_CANT_TREE_DELETE_CRITICAL_O

Critical Directory Service System objects cannot

be deleted during tree delete operations. The tree

delete may have been partially performed.

8561 0x00002171 ERROR_DS_INIT_FAILURE_CONSOLE Directory Services could not start because of the

following error: %1. Error Status: 0x%2. Please

click OK to shutdown the system. You can use

the recovery console to diagnose the system

further.

8562 0x00002172 ERROR_DS_SAM_INIT_FAILURE_CONSOLE Security Accounts Manager initialization failed

because of the following error: %1. Error Status:

0x%2. Please click OK to shutdown the system.

You can use the recovery console to diagnose the

system further.

8563 0x00002173 ERROR_DS_FOREST_VERSION_TOO_HIGH This version of Windows is too old to support the

current directory forest behavior. You must

upgrade the operating system on this server

before it can become a domain controller in this

forest.

8564 0x00002174 ERROR_DS_DOMAIN_VERSION_TOO_HIGH This version of Windows is too old to support the

current domain behavior. You must upgrade the

operating system on this server before it can

become a domain controller in this domain.

8565 0x00002175 ERROR_DS_FOREST_VERSION_TOO_LOW This version of Windows no longer supports the

behavior version in use in this directory forest.

You must advance the forest behavior version

before this server can become a domain

controller in the forest.

8566 0x00002176 ERROR_DS_DOMAIN_VERSION_TOO_LOW This version of Windows no longer supports the

behavior version in use in this domain. You must

advance the domain behavior version before this

server can become a domain controller in the

domain.

8567 0x00002177 ERROR_DS_INCOMPATIBLE_VERSION The version of Windows is incompatible with the

behavior version of the domain or forest.

8568 0x00002178 ERROR_DS_LOW_DSA_VERSION The behavior version cannot be increased to the

requested value because Domain Controllers still

exist with versions lower than the requested

value.

8569 0x00002179 ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXE

DDOMAIN

The behavior version value cannot be increased

while the domain is still in mixed domain mode.

You must first change the domain to native mode

before increasing the behavior version.

8570 0x0000217A ERROR_DS_NOT_SUPPORTED_SORT_ORDER The sort order requested is not supported.

8571 0x0000217B ERROR_DS_NAME_NOT_UNIQUE Found an object with a non unique name.

8572 0x0000217C ERROR_DS_MACHINE_ACCOUNT_CREATED_P

RENT4

The machine account was created pre-NT4. The

account needs to be recreated.

8573 0x0000217D ERROR_DS_OUT_OF_VERSION_STORE The database is out of version store.

8574 0x0000217E ERROR_DS_INCOMPATIBLE_CONTROLS_USED Unable to continue operation because multiple

conflicting controls were used.

8575 0x0000217F ERROR_DS_NO_REF_DOMAIN Unable to find a valid security descriptor

reference domain for this partition.

Appendix

Beckhoff Device Manager 133Version: 4.9

Error Description

decimal Hexadecimal Name

8576 0x00002180 ERROR_DS_RESERVED_LINK_ID Schema update failed: The link identifier is

reserved.

8577 0x00002181 ERROR_DS_LINK_ID_NOT_AVAILABLE Schema update failed: There are no link

identifiers available.

8578 0x00002182 ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEM

BER

An account group can not have a universal group

as a member.

8579 0x00002183 ERROR_DS_MODIFYDN_DISALLOWED_BY_INST

ANCE_TYPE

Rename or move operations on naming context

heads or read-only objects are not allowed.

8580 0x00002184 ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_N

Move operations on objects in the schema

naming context are not allowed.

8581 0x00002185 ERROR_DS_MODIFYDN_DISALLOWED_BY_FLA

A system flag has been set on the object and

does not allow the object to be moved or

renamed.

8582 0x00002186 ERROR_DS_MODIFYDN_WRONG_GRANDPARE

This object is not allowed to change its

grandparent container. Moves are not forbidden

on this object, but are restricted to sibling

containers.

8583 0x00002187 ERROR_DS_NAME_ERROR_TRUST_REFERRAL Unable to resolve completely, a referral to another

forest is generated.

8584 0x00002188 ERROR_NOT_SUPPORTED_ON_STANDARD_SE

RVER

The requested action is not supported on

standard server.

8585 0x00002189 ERROR_DS_CANT_ACCESS_REMOTE_PART_O

F_AD

Could not access a partition of the Active

Directory located on a remote server. Make sure

at least one server is running for the partition in

question.

8586 0x0000218A ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE_V2 The directory cannot validate the proposed

naming context (or partition) name because it

does not hold a replica nor can it contact a replica

of the naming context above the proposed

naming context. Please ensure that the parent

naming context is properly registered in DNS, and

at least one replica of this naming context is

reachable by the Domain Naming master.

8587 0x0000218B ERROR_DS_THREAD_LIMIT_EXCEEDED The thread limit for this request was exceeded.

8588 0x0000218C ERROR_DS_NOT_CLOSEST The Global catalog server is not in the closet site.

Appendix

Beckhoff Device Manager134 Version: 4.9

Error Description

decimal Hexadecimal Name

9001 0x00002329 DNS_ERROR_RCODE_FORMAT_ERROR DNS server unable to interpret format.

9002 0x0000232A DNS_ERROR_RCODE_SERVER_FAILURE DNS server failure.

9003 0x0000232B DNS_ERROR_RCODE_NAME_ERROR DNS name does not exist.

9004 0x0000232C DNS_ERROR_RCODE_NOT_IMPLEMENTED DNS request not supported by name server.

9005 0x0000232D DNS_ERROR_RCODE_REFUSED DNS operation refused.

9006 0x0000232E DNS_ERROR_RCODE_YXDOMAIN DNS name that ought not exist, does exist.

9007 0x0000232F DNS_ERROR_RCODE_YXRRSET DNS RR set that ought not exist, does exist.

9008 0x00002330 DNS_ERROR_RCODE_NXRRSET DNS RR set that ought to exist, does not exist.

9009 0x00002331 DNS_ERROR_RCODE_NOTAUTH DNS server not authoritative for zone.

9010 0x00002332 DNS_ERROR_RCODE_NOTZONE DNS name in update or prereq is not in zone.

9016 0x00002338 DNS_ERROR_RCODE_BADSIG DNS signature failed to verify.

9017 0x00002339 DNS_ERROR_RCODE_BADKEY DNS bad key.

9018 0x0000233A DNS_ERROR_RCODE_BADTIME DNS signature validity expired.

9501 0x0000251D DNS_INFO_NO_RECORDS No records found for given DNS query.

9502 0x0000251E DNS_ERROR_BAD_PACKET Bad DNS packet.

9503 0x0000251F DNS_ERROR_NO_PACKET No DNS packet.

9504 0x00002520 DNS_ERROR_RCODE DNS error, check rcode.

9505 0x00002521 DNS_ERROR_UNSECURE_PACKET Unsecured DNS packet.

9551 0x0000254F DNS_ERROR_INVALID_TYPE Invalid DNS type.

9552 0x00002550 DNS_ERROR_INVALID_IP_ADDRESS Invalid IP address.

9553 0x00002551 DNS_ERROR_INVALID_PROPERTY Invalid property.

9554 0x00002552 DNS_ERROR_TRY_AGAIN_LATER Try DNS operation again later.

9555 0x00002553 DNS_ERROR_NOT_UNIQUE Record for given name and type is not unique.

9556 0x00002554 DNS_ERROR_NON_RFC_NAME DNS name does not comply with RFC

specifications.

9557 0x00002555 DNS_STATUS_FQDN DNS name is a fully-qualified DNS name.

9558 0x00002556 DNS_STATUS_DOTTED_NAME DNS name is dotted (multi-label).

9559 0x00002557 DNS_STATUS_SINGLE_PART_NAME DNS name is a single-part name.

9560 0x00002558 DNS_ERROR_INVALID_NAME_CHAR DSN name contains an invalid character.

9561 0x00002559 DNS_ERROR_NUMERIC_NAME DNS name is entirely numeric.

9601 0x00002581 DNS_ERROR_ZONE_DOES_NOT_EXIST DNS zone does not exist.

9602 0x00002582 DNS_ERROR_NO_ZONE_INFO DNS zone information not available.

9603 0x00002583 DNS_ERROR_INVALID_ZONE_OPERATION Invalid operation for DNS zone.

9604 0x00002584 DNS_ERROR_ZONE_CONFIGURATION_ERROR Invalid DNS zone configuration.

9605 0x00002585 DNS_ERROR_ZONE_HAS_NO_SOA_RECORD DNS zone has no start of authority (SOA) record.

9606 0x00002586 DNS_ERROR_ZONE_HAS_NO_NS_RECORDS DNS zone has no name server (NS) record.

9607 0x00002587 DNS_ERROR_ZONE_LOCKED DNS zone is locked.

9608 0x00002588 DNS_ERROR_ZONE_CREATION_FAILED DNS zone creation failed.

9609 0x00002589 DNS_ERROR_ZONE_ALREADY_EXISTS DNS zone already exists.

9610 0x0000258A DNS_ERROR_AUTOZONE_ALREADY_EXISTS DNS automatic zone already exists.

9611 0x0000258B DNS_ERROR_INVALID_ZONE_TYPE Invalid DNS zone type.

9612 0x0000258C DNS_ERROR_SECONDARY_REQUIRES_MASTE

R_IP

Secondary DNS zone requires master IP address.

9613 0x0000258D DNS_ERROR_ZONE_NOT_SECONDARY DNS zone not secondary.

9614 0x0000258E DNS_ERROR_NEED_SECONDARY_ADDRESSES Need secondary IP address.

9615 0x0000258F DNS_ERROR_WINS_INIT_FAILED WINS initialization failed.

9616 0x00002590 DNS_ERROR_NEED_WINS_SERVERS Need WINS servers.

9617 0x00002591 DNS_ERROR_NBSTAT_INIT_FAILED NBTSTAT initialization call failed.

9618 0x00002592 DNS_ERROR_SOA_DELETE_INVALID Invalid delete of start of authority (SOA)

9619 0x00002593 DNS_ERROR_FORWARDER_ALREADY_EXISTS A conditional forwarding zone already exists for

that name.

9651 0x000025B3 DNS_ERROR_PRIMARY_REQUIRES_DATAFILE Primary DNS zone requires datafile.

9652 0x000025B4 DNS_ERROR_INVALID_DATAFILE_NAME Invalid datafile name for DNS zone.

9653 0x000025B5 DNS_ERROR_DATAFILE_OPEN_FAILURE Failed to open datafile for DNS zone.

9654 0x000025B6 DNS_ERROR_FILE_WRITEBACK_FAILED Failed to write datafile for DNS zone.

9655 0x000025B7 DNS_ERROR_DATAFILE_PARSING Failure while reading datafile for DNS zone.

9701 0x000025E5 DNS_ERROR_RECORD_DOES_NOT_EXIST DNS record does not exist.

9702 0x000025E6 DNS_ERROR_RECORD_FORMAT DNS record format error.

Appendix

Beckhoff Device Manager 135Version: 4.9

Error Description

decimal Hexadecimal Name

9703 0x000025E7 DNS_ERROR_NODE_CREATION_FAILED Node creation failure in DNS.

9704 0x000025E8 DNS_ERROR_UNKNOWN_RECORD_TYPE Unknown DNS record type.

9705 0x000025E9 DNS_ERROR_RECORD_TIMED_OUT DNS record timed out.

9706 0x000025EA DNS_ERROR_NAME_NOT_IN_ZONE Name not in DNS zone.

9707 0x000025EB DNS_ERROR_CNAME_LOOP CNAME loop detected.

9708 0x000025EC DNS_ERROR_NODE_IS_CNAME Node is a CNAME DNS record.

9709 0x000025ED DNS_ERROR_CNAME_COLLISION A CNAME record already exists for given name.

9710 0x000025EE DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT Record only at DNS zone root.

9711 0x000025EF DNS_ERROR_RECORD_ALREADY_EXISTS DNS record already exists.

9712 0x000025F0 DNS_ERROR_SECONDARY_DATA Secondary DNS zone data error.

9713 0x000025F1 DNS_ERROR_NO_CREATE_CACHE_DATA Could not create DNS cache data.

9714 0x000025F2 DNS_ERROR_NAME_DOES_NOT_EXIST DNS name does not exist.

9715 0x000025F3 DNS_WARNING_PTR_CREATE_FAILED Could not create pointer (PTR) record.

9716 0x000025F4 DNS_WARNING_DOMAIN_UNDELETED DNS domain was undeleted.

9717 0x000025F5 DNS_ERROR_DS_UNAVAILABLE The directory service is unavailable.

9718 0x000025F6 DNS_ERROR_DS_ZONE_ALREADY_EXISTS DNS zone already exists in the directory service.

9719 0x000025F7 DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE DNS server not creating or reading the boot file

for the directory service integrated DNS zone.

9751 0x00002617 DNS_INFO_AXFR_COMPLETE DNS AXFR (zone transfer) complete.

9752 0x00002618 DNS_ERROR_AXFR DNS zone transfer failed.

9753 0x00002619 DNS_INFO_ADDED_LOCAL_WINS Added local WINS server.

9801 0x00002649 DNS_STATUS_CONTINUE_NEEDED Secure update call needs to continue update

request.

9851 0x0000267B DNS_ERROR_NO_TCPIP TCP/IP network protocol not installed.

9852 0x0000267C DNS_ERROR_NO_DNS_SERVERS No DNS servers configured for local system.

9901 0x000026AD DNS_ERROR_DP_DOES_NOT_EXIST The specified directory partition does not exist.

9902 0x000026AE DNS_ERROR_DP_ALREADY_EXISTS The specified directory partition already exists.

9903 0x000026AF DNS_ERROR_DP_NOT_ENLISTED The DS is not enlisted in the specified directory

partition.

9904 0x000026B0 DNS_ERROR_DP_ALREADY_ENLISTED The DS is already enlisted in the specified

directory partition.

Appendix

Beckhoff Device Manager136 Version: 4.9

Error Description

decimal Hexadecimal Name

10004 0x00002714 WSAEINTR A blocking operation was interrupted by a call to

WSACancelBlockingCall.

10009 0x00002719 WSAEBADF The file handle supplied is not valid.

10013 0x0000271D WSAEACCES An attempt was made to access a socket in a way

forbidden by its access permissions.

10014 0x0000271E WSAEFAULT The system detected an invalid pointer address in

attempting to use a pointer argument in a call.

10022 0x00002726 WSAEINVAL An invalid argument was supplied.

10024 0x00002728 WSAEMFILE Too many open sockets.

10035 0x00002733 WSAEWOULDBLOCK A non-blocking socket operation could not be

completed immediately.

10036 0x00002734 WSAEINPROGRESS A blocking operation is currently executing.

10037 0x00002735 WSAEALREADY An operation was attempted on a non-blocking

socket that already had an operation in progress.

10038 0x00002736 WSAENOTSOCK An operation was attempted on something that is

not a socket.

10039 0x00002737 WSAEDESTADDRREQ A required address was omitted from an operation

on a socket.

10040 0x00002738 WSAEMSGSIZE A message sent on a datagram socket was larger

than the internal message buffer or some other

network limit, or the buffer used to receive a

datagram into was smaller than the datagram

itself.

10041 0x00002739 WSAEPROTOTYPE A protocol was specified in the socket function

call that does not support the semantics of the

socket type requested.

10042 0x0000273A WSAENOPROTOOPT An unknown, invalid, or unsupported option or

level was specified in a getsockopt or setsockopt

call.

10043 0x0000273B WSAEPROTONOSUPPORT The requested protocol has not been configured

into the system, or no implementation for it exists.

10044 0x0000273C WSAESOCKTNOSUPPORT The support for the specified socket type does not

exist in this address family.

10045 0x0000273D WSAEOPNOTSUPP The attempted operation is not supported for the

type of object referenced.

10046 0x0000273E WSAEPFNOSUPPORT The protocol family has not been configured into

the system or no implementation for it exists.

10047 0x0000273F WSAEAFNOSUPPORT An address incompatible with the requested

protocol was used.

10048 0x00002740 WSAEADDRINUSE Only one usage of each socket address (protocol/

network address/port) is normally permitted.

10049 0x00002741 WSAEADDRNOTAVAIL The requested address is not valid in its context.

10050 0x00002742 WSAENETDOWN A socket operation encountered a dead network.

10051 0x00002743 WSAENETUNREACH A socket operation was attempted to an

unreachable network.

10052 0x00002744 WSAENETRESET The connection has been broken due to keep-

alive activity detecting a failure while the

operation was in progress.

10053 0x00002745 WSAECONNABORTED An established connection was aborted by the

software in your host machine.

10054 0x00002746 WSAECONNRESET An existing connection was forcibly closed by the

remote host.

10055 0x00002747 WSAENOBUFS An operation on a socket could not be performed

because the system lacked sufficient buffer space

or because a queue was full.

10056 0x00002748 WSAEISCONN A connect request was made on an already

connected socket.

10057 0x00002749 WSAENOTCONN A request to send or receive data was disallowed

because the socket is not connected and (when

sending on a datagram socket using a sendto

call) no address was supplied.

10058 0x0000274A WSAESHUTDOWN A request to send or receive data was disallowed

because the socket had already been shut down

in that direction with a previous shutdown call.

10059 0x0000274B WSAETOOMANYREFS Too many references to some kernel object.

Appendix

Beckhoff Device Manager 137Version: 4.9

Error Description

decimal Hexadecimal Name

10060 0x0000274C WSAETIMEDOUT A connection attempt failed because the

connected party did not properly respond after a

period of time, or established connection failed

because connected host has failed to respond.

10061 0x0000274D WSAECONNREFUSED No connection could be made because the target

machine actively refused it.

10062 0x0000274E WSAELOOP Cannot translate name.

10063 0x0000274F WSAENAMETOOLONG Name component or name was too long.

10064 0x00002750 WSAEHOSTDOWN A socket operation failed because the destination

host was down.

10065 0x00002751 WSAEHOSTUNREACH A socket operation was attempted to an

unreachable host.

10066 0x00002752 WSAENOTEMPTY Cannot remove a directory that is not empty.

10067 0x00002753 WSAEPROCLIM A Windows Sockets implementation may have a

limit on the number of applications that may use it

simultaneously.

10068 0x00002754 WSAEUSERS Ran out of quota.

10069 0x00002755 WSAEDQUOT Ran out of disk quota.

10070 0x00002756 WSAESTALE File handle reference is no longer available.

10071 0x00002757 WSAEREMOTE Item is not available locally.

10091 0x0000276B WSASYSNOTREADY WSAStartup cannot function at this time because

the underlying system it uses to provide network

services is currently unavailable.

10092 0x0000276C WSAVERNOTSUPPORTED The Windows Sockets version requested is not

supported.

10093 0x0000276D WSANOTINITIALISED Either the application has not called WSAStartup,

or WSAStartup failed.

10101 0x00002775 WSAEDISCON Returned by WSARecv or WSARecvFrom to

indicate the remote party has initiated a graceful

shutdown sequence.

10102 0x00002776 WSAENOMORE No more results can be returned by

WSALookupServiceNext.

10103 0x00002777 WSAECANCELLED A call to WSALookupServiceEnd was made while

this call was still processing. The call has been

canceled.

10104 0x00002778 WSAEINVALIDPROCTABLE The procedure call table is invalid.

10105 0x00002779 WSAEINVALIDPROVIDER The requested service provider is invalid.

10106 0x0000277A WSAEPROVIDERFAILEDINIT The requested service provider could not be

loaded or initialized.

10107 0x0000277B WSASYSCALLFAILURE A system call that should never fail has failed.

10108 0x0000277C WSASERVICE_NOT_FOUND No such service is known. The service cannot be

found in the specified name space.

10109 0x0000277D WSATYPE_NOT_FOUND The specified class was not found.

10110 0x0000277E WSA_E_NO_MORE No more results can be returned by

WSALookupServiceNext.

10111 0x0000277F WSA_E_CANCELLED A call to WSALookupServiceEnd was made while

this call was still processing. The call has been

canceled.

10112 0x00002780 WSAEREFUSED A database query failed because it was actively

refused.

11001 0x00002AF9 WSAHOST_NOT_FOUND No such host is known.

11002 0x00002AFA WSATRY_AGAIN This is usually a temporary error during hostname

resolution and means that the local server did not

receive a response from an authoritative server.

11003 0x00002AFB WSANO_RECOVERY A non-recoverable error occurred during a

database lookup.

11004 0x00002AFC WSANO_DATA The requested name is valid and was found in the

database, but it does not have the correct

associated data being resolved for.

11005 0x00002AFD WSA_QOS_RECEIVERS At least one reserve has arrived.

11006 0x00002AFE WSA_QOS_SENDERS At least one path has arrived.

11007 0x00002AFF WSA_QOS_NO_SENDERS There are no senders.

11008 0x00002B00 WSA_QOS_NO_RECEIVERS There are no receivers.

11009 0x00002B01 WSA_QOS_REQUEST_CONFIRMED Reserve has been confirmed.

Appendix

Beckhoff Device Manager138 Version: 4.9

Error Description

decimal Hexadecimal Name

11010 0x00002B02 WSA_QOS_ADMISSION_FAILURE Error due to lack of resources.

11011 0x00002B03 WSA_QOS_POLICY_FAILURE Rejected for administrative reasons - bad

credentials.

11012 0x00002B04 WSA_QOS_BAD_STYLE Unknown or conflicting style.

11013 0x00002B05 WSA_QOS_BAD_OBJECT Problem with some part of the filterspec or

providerspecific buffer in general.

11014 0x00002B06 WSA_QOS_TRAFFIC_CTRL_ERROR Problem with some part of the flowspec.

11015 0x00002B07 WSA_QOS_GENERIC_ERROR General QOS error.

11016 0x00002B08 WSA_QOS_ESERVICETYPE An invalid or unrecognized service type was

found in the flowspec.

11017 0x00002B09 WSA_QOS_EFLOWSPEC An invalid or inconsistent flowspec was found in

the QOS structure.

11018 0x00002B0A WSA_QOS_EPROVSPECBUF Invalid QOS provider-specific buffer.

11019 0x00002B0B WSA_QOS_EFILTERSTYLE An invalid QOS filter style was used.

11020 0x00002B0C WSA_QOS_EFILTERTYPE An invalid QOS filter type was used.

11021 0x00002B0D WSA_QOS_EFILTERCOUNT An incorrect number of QOS FILTERSPECs were

specified in the FLOWDESCRIPTOR.

11022 0x00002B0E WSA_QOS_EOBJLENGTH An object with an invalid ObjectLength field was

specified in the QOS provider-specific buffer.

11023 0x00002B0F WSA_QOS_EFLOWCOUNT An incorrect number of flow descriptors was

specified in the QOS structure.

11024 0x00002B10 WSA_QOS_EUNKNOWNPSOBJ An unrecognized object was found in the QOS

provider-specific buffer.

11025 0x00002B11 WSA_QOS_EPOLICYOBJ An invalid policy object was found in the QOS

provider-specific buffer.

11026 0x00002B12 WSA_QOS_EFLOWDESC An invalid QOS flow descriptor was found in the

flow descriptor list.

11027 0x00002B13 WSA_QOS_EPSFLOWSPEC An invalid or inconsistent flowspec was found in

the QOS provider-specific buffer.

11028 0x00002B14 WSA_QOS_EPSFILTERSPEC An invalid FILTERSPEC was found in the QOS

provider-specific buffer.

11029 0x00002B15 WSA_QOS_ESDMODEOBJ An invalid shape discard mode object was found

in the QOS provider-specific buffer.

11030 0x00002B16 WSA_QOS_ESHAPERATEOBJ An invalid shaping rate object was found in the

QOS provider-specific buffer.

11031 0x00002B17 WSA_QOS_RESERVED_PETYPE A reserved policy element was found in the QOS

provider-specific buffer.

Appendix

Beckhoff Device Manager 139Version: 4.9

Error Description

decimal Hexadecimal Name

12000 0x00002EE0 ERROR_SXS_SECTION_NOT_FOUND The requested section was not present in the

activation context.

12001 0x00002EE1 ERROR_SXS_CANT_GEN_ACTCTX This application has failed to start because the

application configuration is incorrect. Reinstalling

the application may fix this problem.

12002 0x00002EE2 ERROR_SXS_INVALID_ACTCTXDATA_FORMAT The application binding data format is invalid.

12003 0x00002EE3 ERROR_SXS_ASSEMBLY_NOT_FOUND The referenced assembly is not installed on your

system.

12004 0x00002EE4 ERROR_SXS_MANIFEST_FORMAT_ERROR The manifest file does not begin with the required

tag and format information.

12005 0x00002EE5 ERROR_SXS_MANIFEST_PARSE_ERROR The manifest file contains one or more syntax

errors.

12006 0x00002EE6 ERROR_SXS_ACTIVATION_CONTEXT_DISABLE

The application attempted to activate a disabled

activation context.

12007 0x00002EE7 ERROR_SXS_KEY_NOT_FOUND The requested lookup key was not found in any

active activation context.

12008 0x00002EE8 ERROR_SXS_VERSION_CONFLICT A component version required by the application

conflicts with another component version already

active.

12009 0x00002EE9 ERROR_SXS_WRONG_SECTION_TYPE The type requested activation context section

does not match the query API used.

12010 0x00002EEA ERROR_SXS_THREAD_QUERIES_DISABLED Lack of system resources has required isolated

activation to be disabled for the current thread of

execution.

12011 0x00002EEB ERROR_SXS_PROCESS_DEFAULT_ALREADY_S

An attempt to set the process default activation

context failed because the process default

activation context was already set.

12012 0x00002EEC ERROR_SXS_UNKNOWN_ENCODING_GROUP The encoding group identifier specified is not

recognized.

12013 0x00002EED ERROR_SXS_UNKNOWN_ENCODING The encoding requested is not recognized.

12014 0x00002EEE ERROR_SXS_INVALID_XML_NAMESPACE_URI The manifest contains a reference to an invalid

URI.

12015 0x00002EEF ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_

NOT_INSTALLED

The application manifest contains a reference to a

dependent assembly which is not installed.

12016 0x00002EF0 ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_

NOT_INSTALLED

The manifest for an assembly used by the

application has a reference to a dependent

assembly which is not installed.

12017 0x00002EF1 ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_A

TTRIBUTE

The manifest contains an attribute for the

assembly identity which is not valid.

12018 0x00002EF2 ERROR_SXS_MANIFEST_MISSING_REQUIRED_

DEFAULT_NAMESPACE

The manifest is missing the required default

namespace specification on the assembly

element.

12019 0x00002EF3 ERROR_SXS_MANIFEST_INVALID_REQUIRED_

DEFAULT_NAMESPACE

The manifest has a default namespace specified

on the assembly element but its value is not

"urn:schemas-microsoft-com:asm.v1".

12020 0x00002EF4 ERROR_SXS_PRIVATE_MANIFEST_CROSS_PAT

WITH_REPARSE_POINT

The private manifest probe has crossed the

reparse-point-associated path.

12021 0x00002EF5 ERROR_SXS_DUPLICATE_DLL_NAME Two or more components referenced directly or

indirectly by the application manifest have files by

the same name.

12022 0x00002EF6 ERROR_SXS_DUPLICATE_WINDOWCLASS_NA

Two or more components referenced directly or

indirectly by the application manifest have window

classes with the same name.

12023 0x00002EF7 ERROR_SXS_DUPLICATE_CLSID Two or more components referenced directly or

indirectly by the application manifest have the

same COM server CLSIDs.

12024 0x00002EF8 ERROR_SXS_DUPLICATE_IID Two or more components referenced directly or

indirectly by the application manifest have proxies

for the same COM interface IIDs.

12025 0x00002EF9 ERROR_SXS_DUPLICATE_TLBID Two or more components referenced directly or

indirectly by the application manifest have the

same COM type library TLBIDs.

12026 0x00002EFA ERROR_SXS_DUPLICATE_PROGID Two or more components referenced directly or

indirectly by the application manifest have the

same COM ProgIDs.

Appendix

Beckhoff Device Manager140 Version: 4.9

Error Description

decimal Hexadecimal Name

12027 0x00002EFB ERROR_SXS_DUPLICATE_ASSEMBLY_NAME Two or more components referenced directly or

indirectly by the application manifest are different

versions of the same component which is not

permitted.

12028 0x00002EFC ERROR_SXS_FILE_HASH_MISMATCH A component's file does not match the verification

information present in the component manifest.

12029 0x00002EFD ERROR_SXS_POLICY_PARSE_ERROR The policy manifest contains one or more syntax

errors.

12030 0x00002EFE ERROR_SXS_XML_E_MISSINGQUOTE Manifest Parse Error : A string literal was

expected, but no opening quote character was

found.

12031 0x00002EFF ERROR_SXS_XML_E_COMMENTSYNTAX Manifest Parse Error : Incorrect syntax was used

in a comment.

12032 0x00002F00 ERROR_SXS_XML_E_BADSTARTNAMECHAR Manifest Parse Error : A name was started with

an invalid character.

12033 0x00002F01 ERROR_SXS_XML_E_BADNAMECHAR Manifest Parse Error : A name contained an

invalid character.

12034 0x00002F02 ERROR_SXS_XML_E_BADCHARINSTRING Manifest Parse Error : A string literal contained an

invalid character.

12035 0x00002F03 ERROR_SXS_XML_E_XMLDECLSYNTAX Manifest Parse Error : Invalid syntax for an XML

declaration.

12036 0x00002F04 ERROR_SXS_XML_E_BADCHARDATA Manifest Parse Error : An invalid character was

found in text content.

12037 0x00002F05 ERROR_SXS_XML_E_MISSINGWHITESPACE Manifest Parse Error : Required white space was

missing.

12038 0x00002F06 ERROR_SXS_XML_E_EXPECTINGTAGEND Manifest Parse Error : The character '>' was

expected.

12039 0x00002F07 ERROR_SXS_XML_E_MISSINGSEMICOLON Manifest Parse Error : A semi colon character

was expected.

12040 0x00002F08 ERROR_SXS_XML_E_UNBALANCEDPAREN Manifest Parse Error : Unbalanced parentheses.

12041 0x00002F09 ERROR_SXS_XML_E_INTERNALERROR Manifest Parse Error : Internal error.

12042 0x00002F0A ERROR_SXS_XML_E_UNEXPECTED_WHITESPA

Manifest Parse Error : White space is not allowed

at this location.

12043 0x00002F0B ERROR_SXS_XML_E_INCOMPLETE_ENCODING Manifest Parse Error : End of file reached in

invalid state for current encoding.

12044 0x00002F0C ERROR_SXS_XML_E_MISSING_PAREN Manifest Parse Error : Missing parenthesis.

12045 0x00002F0D ERROR_SXS_XML_E_EXPECTINGCLOSEQUOTE Manifest Parse Error : A single or double closing

quote character (\' or \") is missing.

12046 0x00002F0E ERROR_SXS_XML_E_MULTIPLE_COLONS Manifest Parse Error : Multiple colons are not

allowed in a name.

12047 0x00002F0F ERROR_SXS_XML_E_INVALID_DECIMAL Manifest Parse Error : Invalid character for

decimal digit.

12048 0x00002F10 ERROR_SXS_XML_E_INVALID_HEXIDECIMAL Manifest Parse Error : Invalid character for

hexadecimal digit.

12049 0x00002F11 ERROR_SXS_XML_E_INVALID_UNICODE Manifest Parse Error : Invalid Unicode character

value for this platform.

12050 0x00002F12 ERROR_SXS_XML_E_WHITESPACEORQUESTIO

NMARK

Manifest Parse Error : Expecting white space or

'?'.

12051 0x00002F13 ERROR_SXS_XML_E_UNEXPECTEDENDTAG Manifest Parse Error : End tag was not expected

at this location.

12052 0x00002F14 ERROR_SXS_XML_E_UNCLOSEDTAG Manifest Parse Error : The following tags were not

closed: %1.

12053 0x00002F15 ERROR_SXS_XML_E_DUPLICATEATTRIBUTE Manifest Parse Error : Duplicate attribute.

12054 0x00002F16 ERROR_SXS_XML_E_MULTIPLEROOTS Manifest Parse Error : Only one top level element

is allowed in an XML document.

12055 0x00002F17 ERROR_SXS_XML_E_INVALIDATROOTLEVEL Manifest Parse Error : Invalid at the top level of

the document.

12056 0x00002F18 ERROR_SXS_XML_E_BADXMLDECL Manifest Parse Error : Invalid XML declaration.

12057 0x00002F19 ERROR_SXS_XML_E_MISSINGROOT Manifest Parse Error : XML document must have

a top level element.

12058 0x00002F1A ERROR_SXS_XML_E_UNEXPECTEDEOF Manifest Parse Error : Unexpected end of file.

12059 0x00002F1B ERROR_SXS_XML_E_BADPEREFINSUBSET Manifest Parse Error : Parameter entities cannot

be used inside markup declarations in an internal

subset.

12060 0x00002F1C ERROR_SXS_XML_E_UNCLOSEDSTARTTAG Manifest Parse Error : Element was not closed.

Appendix

Beckhoff Device Manager 141Version: 4.9

Error Description

decimal Hexadecimal Name

12061 0x00002F1D ERROR_SXS_XML_E_UNCLOSEDENDTAG Manifest Parse Error : End element was missing

the character '>'.

12062 0x00002F1E ERROR_SXS_XML_E_UNCLOSEDSTRING Manifest Parse Error : A string literal was not

closed.

12063 0x00002F1F ERROR_SXS_XML_E_UNCLOSEDCOMMENT Manifest Parse Error : A comment was not

closed.

12064 0x00002F20 ERROR_SXS_XML_E_UNCLOSEDDECL Manifest Parse Error : A declaration was not

closed.

12065 0x00002F21 ERROR_SXS_XML_E_UNCLOSEDCDATA Manifest Parse Error : A CDATA section was not

closed.

12066 0x00002F22 ERROR_SXS_XML_E_RESERVEDNAMESPACE Manifest Parse Error : The namespace prefix is

not allowed to start with the reserved string "xml".

12067 0x00002F23 ERROR_SXS_XML_E_INVALIDENCODING Manifest Parse Error : System does not support

the specified encoding.

12068 0x00002F24 ERROR_SXS_XML_E_INVALIDSWITCH Manifest Parse Error : Switch from current

encoding to specified encoding not supported.

12069 0x00002F25 ERROR_SXS_XML_E_BADXMLCASE Manifest Parse Error : The name 'xml' is reserved

and must be lower case.

12070 0x00002F26 ERROR_SXS_XML_E_INVALID_STANDALONE Manifest Parse Error : The standalone attribute

must have the value 'yes' or 'no'.

12071 0x00002F27 ERROR_SXS_XML_E_UNEXPECTED_STANDAL

ONE

Manifest Parse Error : The standalone attribute

cannot be used in external entities.

12072 0x00002F28 ERROR_SXS_XML_E_INVALID_VERSION Manifest Parse Error : Invalid version number.

12073 0x00002F29 ERROR_SXS_XML_E_MISSINGEQUALS Manifest Parse Error : Missing equals sign

between attribute and attribute value.

13000 0x000032C8 ERROR_IPSEC_QM_POLICY_EXISTS The specified quick mode policy already exists.

13001 0x000032C9 ERROR_IPSEC_QM_POLICY_NOT_FOUND The specified quick mode policy was not found.

13002 0x000032CA ERROR_IPSEC_QM_POLICY_IN_USE The specified quick mode policy is being used.

13003 0x000032CB ERROR_IPSEC_MM_POLICY_EXISTS The specified main mode policy already exists.

13004 0x000032CC ERROR_IPSEC_MM_POLICY_NOT_FOUND The specified main mode policy was not found.

13005 0x000032CD ERROR_IPSEC_MM_POLICY_IN_USE The specified main mode policy is being used.

13006 0x000032CE ERROR_IPSEC_MM_FILTER_EXISTS The specified main mode filter already exists.

13007 0x000032CF ERROR_IPSEC_MM_FILTER_NOT_FOUND The specified main mode filter was not found.

13008 0x000032D0 ERROR_IPSEC_TRANSPORT_FILTER_EXISTS The specified transport mode filter already exists.

13009 0x000032D1 ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOU

The specified transport mode filter does not exist.

13010 0x000032D2 ERROR_IPSEC_MM_AUTH_EXISTS The specified main mode authentication list

exists.

13011 0x000032D3 ERROR_IPSEC_MM_AUTH_NOT_FOUND The specified main mode authentication list was

not found.

13012 0x000032D4 ERROR_IPSEC_MM_AUTH_IN_USE The specified quick mode policy is being used.

13013 0x000032D5 ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_F

OUND

The specified main mode policy was not found.

13014 0x000032D6 ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOU

The specified quick mode policy was not found.

13015 0x000032D7 ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FO

UND

The manifest file contains one or more syntax

errors.

13016 0x000032D8 ERROR_IPSEC_TUNNEL_FILTER_EXISTS The application attempted to activate a disabled

activation context.

13017 0x000032D9 ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND The requested lookup key was not found in any

active activation context.

13018 0x000032DA ERROR_IPSEC_MM_FILTER_PENDING_DELETI

The Main Mode filter is pending deletion.

13019 0x000032DB ERROR_IPSEC_TRANSPORT_FILTER_PENDING

_DELETION

The transport filter is pending deletion.

13020 0x000032DC ERROR_IPSEC_TUNNEL_FILTER_PENDING_DE

LETION

The tunnel filter is pending deletion.

13021 0x000032DD ERROR_IPSEC_MM_POLICY_PENDING_DELETI

The Main Mode policy is pending deletion.

13022 0x000032DE ERROR_IPSEC_MM_AUTH_PENDING_DELETIO

The Main Mode authentication bundle is pending

deletion.

13023 0x000032DF ERROR_IPSEC_QM_POLICY_PENDING_DELETI

The Quick Mode policy is pending deletion.

Appendix

Beckhoff Device Manager142 Version: 4.9

Error Description

decimal Hexadecimal Name

13801 0x000035E9 ERROR_IPSEC_IKE_AUTH_FAIL IKE authentication credentials are unacceptable.

13802 0x000035EA ERROR_IPSEC_IKE_ATTRIB_FAIL IKE security attributes are unacceptable.

13803 0x000035EB ERROR_IPSEC_IKE_NEGOTIATION_PENDING IKE Negotiation in progress.

13804 0x000035EC ERROR_IPSEC_IKE_GENERAL_PROCESSING_E

RROR

General processing error.

13805 0x000035ED ERROR_IPSEC_IKE_TIMED_OUT Negotiation timed out.

13806 0x000035EE ERROR_IPSEC_IKE_NO_CERT IKE failed to find valid machine certificate.

13807 0x000035EF ERROR_IPSEC_IKE_SA_DELETED IKE SA deleted by peer before establishment

completed.

13808 0x000035F0 ERROR_IPSEC_IKE_SA_REAPED IKE SA deleted before establishment completed.

13809 0x000035F1 ERROR_IPSEC_IKE_MM_ACQUIRE_DROP Negotiation request sat in Queue too long.

13810 0x000035F2 ERROR_IPSEC_IKE_QM_ACQUIRE_DROP Negotiation request sat in Queue too long.

13811 0x000035F3 ERROR_IPSEC_IKE_QUEUE_DROP_MM Negotiation request sat in Queue too long.

13812 0x000035F4 ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM Negotiation request sat in Queue too long.

13813 0x000035F5 ERROR_IPSEC_IKE_DROP_NO_RESPONSE No response from peer.

13814 0x000035F6 ERROR_IPSEC_IKE_MM_DELAY_DROP Negotiation took too long.

13815 0x000035F7 ERROR_IPSEC_IKE_QM_DELAY_DROP Negotiation took too long.

13816 0x000035F8 ERROR_IPSEC_IKE_ERROR Unknown error occurred.

13817 0x000035F9 ERROR_IPSEC_IKE_CRL_FAILED Certificate Revocation Check failed.

13818 0x000035FA ERROR_IPSEC_IKE_INVALID_KEY_USAGE Invalid certificate key usage.

13819 0x000035FB ERROR_IPSEC_IKE_INVALID_CERT_TYPE Invalid certificate type.

13820 0x000035FC ERROR_IPSEC_IKE_NO_PRIVATE_KEY No private key associated with machine

certificate.

13822 0x000035FE ERROR_IPSEC_IKE_DH_FAIL Failure in Diffie-Helman computation.

13824 0x00003600 ERROR_IPSEC_IKE_INVALID_HEADER Invalid header.

13825 0x00003601 ERROR_IPSEC_IKE_NO_POLICY No policy configured.

13826 0x00003602 ERROR_IPSEC_IKE_INVALID_SIGNATURE Failed to verify signature.

13827 0x00003603 ERROR_IPSEC_IKE_KERBEROS_ERROR Failed to authenticate using Kerberos.

13828 0x00003604 ERROR_IPSEC_IKE_NO_PUBLIC_KEY Peer's certificate did not have a public key.

13829 0x00003605 ERROR_IPSEC_IKE_PROCESS_ERR Error processing error payload.

13830 0x00003606 ERROR_IPSEC_IKE_PROCESS_ERR_SA Error processing SA payload.

13831 0x00003607 ERROR_IPSEC_IKE_PROCESS_ERR_PROP Error processing Proposal payload.

13832 0x00003608 ERROR_IPSEC_IKE_PROCESS_ERR_TRANS Error processing Transform payload.

13833 0x00003609 ERROR_IPSEC_IKE_PROCESS_ERR_KE Error processing KE payload.

13834 0x0000360A ERROR_IPSEC_IKE_PROCESS_ERR_ID Error processing ID payload.

13835 0x0000360B ERROR_IPSEC_IKE_PROCESS_ERR_CERT Error processing Cert payload.

13836 0x0000360C ERROR_IPSEC_IKE_PROCESS_ERR_CERT_RE

Error processing Certificate Request payload.

13837 0x0000360D ERROR_IPSEC_IKE_PROCESS_ERR_HASH Error processing Hash payload.

13838 0x0000360E ERROR_IPSEC_IKE_PROCESS_ERR_SIG Error processing Signature payload.

13839 0x0000360F ERROR_IPSEC_IKE_PROCESS_ERR_NONCE Error processing Nonce payload.

13840 0x00003610 ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY Error processing Notify payload.

13841 0x00003611 ERROR_IPSEC_IKE_PROCESS_ERR_DELETE Error processing Delete Payload.

13842 0x00003612 ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR Error processing VendorId payload.

13843 0x00003613 ERROR_IPSEC_IKE_INVALID_PAYLOAD Invalid payload received.

13844 0x00003614 ERROR_IPSEC_IKE_LOAD_SOFT_SA Soft SA loaded.

13845 0x00003615 ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN Soft SA torn down.

13846 0x00003616 ERROR_IPSEC_IKE_INVALID_COOKIE Invalid cookie received..

13847 0x00003617 ERROR_IPSEC_IKE_NO_PEER_CERT Peer failed to send valid machine certificate.

13848 0x00003618 ERROR_IPSEC_IKE_PEER_CRL_FAILED Certification Revocation check of peer's certificate

failed.

13849 0x00003619 ERROR_IPSEC_IKE_POLICY_CHANGE New policy invalidated SAs formed with old policy.

13850 0x0000361A ERROR_IPSEC_IKE_NO_MM_POLICY There is no available Main Mode IKE policy.

13851 0x0000361B ERROR_IPSEC_IKE_NOTCBPRIV Failed to enabled TCB privilege.

13852 0x0000361C ERROR_IPSEC_IKE_SECLOADFAIL Failed to load SECURITY.DLL.

13853 0x0000361D ERROR_IPSEC_IKE_FAILSSPINIT Failed to obtain security function table dispatch

address from SSPI.

13854 0x0000361E ERROR_IPSEC_IKE_FAILQUERYSSP Failed to query Kerberos package to obtain max

token size.

Appendix

Beckhoff Device Manager 143Version: 4.9

Error Description

decimal Hexadecimal Name

13855 0x0000361F ERROR_IPSEC_IKE_SRVACQFAIL Failed to obtain Kerberos server credentials for

ISAKMP/ERROR_IPSEC_IKE service. Kerberos

authentication will not function. The most likely

reason for this is lack of domain membership.

This is normal if your computer is a member of a

workgroup.

13856 0x00003620 ERROR_IPSEC_IKE_SRVQUERYCRED Failed to determine SSPI principal name for

ISAKMP/ERROR_IPSEC_IKE service

(QueryCredentialsAttributes).

13857 0x00003621 ERROR_IPSEC_IKE_GETSPIFAIL Failed to obtain new SPI for the inbound SA from

Ipsec driver. The most common cause for this is

that the driver does not have the correct filter.

Check your policy to verify the filters.

13858 0x00003622 ERROR_IPSEC_IKE_INVALID_FILTER Given filter is invalid.

13859 0x00003623 ERROR_IPSEC_IKE_OUT_OF_MEMORY Memory allocation failed.

13860 0x00003624 ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED Failed to add Security Association to IPSec

Driver. The most common cause for this is if the

IKE negotiation took too long to complete. If the

problem persists, reduce the load on the faulting

machine.

13861 0x00003625 ERROR_IPSEC_IKE_INVALID_POLICY Invalid policy.

13862 0x00003626 ERROR_IPSEC_IKE_UNKNOWN_DOI Invalid DOI.

13863 0x00003627 ERROR_IPSEC_IKE_INVALID_SITUATION Invalid situation.

13864 0x00003628 ERROR_IPSEC_IKE_DH_FAILURE Diffie-Hellman failure.

13865 0x00003629 ERROR_IPSEC_IKE_INVALID_GROUP Invalid Diffie-Hellman group.

13866 0x0000362A ERROR_IPSEC_IKE_ENCRYPT Error encrypting payload.

13867 0x0000362B ERROR_IPSEC_IKE_DECRYPT Error decrypting payload.

13868 0x0000362C ERROR_IPSEC_IKE_POLICY_MATCH Policy match error.

13869 0x0000362D ERROR_IPSEC_IKE_UNSUPPORTED_ID Unsupported ID.

13870 0x0000362E ERROR_IPSEC_IKE_INVALID_HASH Hash verification failed.

13871 0x0000362F ERROR_IPSEC_IKE_INVALID_HASH_ALG Invalid hash algorithm.

13872 0x00003630 ERROR_IPSEC_IKE_INVALID_HASH_SIZE Invalid hash size.

13873 0x00003631 ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG Invalid encryption algorithm.

13874 0x00003632 ERROR_IPSEC_IKE_INVALID_AUTH_ALG Invalid authentication algorithm.

13875 0x00003633 ERROR_IPSEC_IKE_INVALID_SIG Invalid certificate signature.

13876 0x00003634 ERROR_IPSEC_IKE_LOAD_FAILED Load failed.

13877 0x00003635 ERROR_IPSEC_IKE_RPC_DELETE Deleted via RPC call.

13878 0x00003636 ERROR_IPSEC_IKE_BENIGN_REINIT Temporary state created to perform

reinitialization. This is not a real failure.

13879 0x00003637 ERROR_IPSEC_IKE_INVALID_RESPONDER_LIF

ETIME_NOTIFY

The lifetime value received in the Responder

Lifetime Notify is below the Windows 2000

configured minimum value. Please fix the policy

on the peer machine.

13880 0x00003638 ERROR_IPSEC_IKE_QM_LIMIT_REAP SA reaped because QM limit was reached.

13881 0x00003639 ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN Key length in certificate is too small for configured

security requirements.

13882 0x0000363A ERROR_IPSEC_IKE_MM_LIMIT Max number of established MM SAs to peer

exceeded.

13883 0x0000363B ERROR_IPSEC_IKE_NEGOTIATION_DISABLED IKE received a policy that disables negotiation.

13884 0x0000363C ERROR_IPSEC_IKE_QM_LIMIT Reached maximum quick mode limit for the main

mode. New main mode will be started.

8.6 FreeBSD error codes

The following table contains a list of FreeBSD error codes.

Appendix

Beckhoff Device Manager144 Version: 4.9

Decimal Hexadecimal Name Description

1 0x00000001 EPERM Operation not permitted

2 0x00000002 ENOENT No such file or directory

3 0x00000003 ESRCH No such process

4 0x00000004 EINTR Interrupted system call

5 0x00000005 EIO Input/output error

6 0x00000006 ENXIO Device not configured

7 0x00000007 E2BIG Argument list too long

8 0x00000008 ENOEXEC Exec format error

9 0x00000009 EBADF Bad file descriptor

10 0x0000000A ECHILD No child processes

11 0x0000000B EDEADLK Resource deadlock avoided

12 0x0000000C ENOMEM Cannot allocate memory

13 0x0000000D EACCES Permission denied

14 0x0000000E EFAULT Bad address

15 0x0000000F ENOTBLK Block device required

16 0x00000010 EBUSY Device busy

17 0x00000011 EEXIST File exists

18 0x00000012 EXDEV Cross-device link

19 0x00000013 ENODEV Operation not supported by device

20 0x00000014 ENOTDIR Not a directory

21 0x00000015 EISDIR Is a directory

22 0x00000016 EINVAL Invalid argument

23 0x00000017 ENFILE Too many open files in system

24 0x00000018 EMFILE Too many open files

25 0x00000019 ENOTTY Inappropriate ioctl for device

26 0x0000001A ETXTBSY Text file busy

27 0x0000001B EFBIG File too large

28 0x0000001C ENOSPC No space left on device

29 0x0000001D ESPIPE Illegal seek

30 0x0000001E EROFS Read-only file system

31 0x0000001F EMLINK Too many links

32 0x00000020 EPIPE Broke pipe

33 0x00000021 EDOM Numerical argument out of domain

34 0x00000022 ERANGE Result too large

35 0x00000023 EAGAIN Resource temporarily unavailable

36 0x00000024 EINPROGRESS Operation now in progress

37 0x00000025 EALREADY Operation already in progress

38 0x00000026 ENOTSOCK Socket operation on non-socket

39 0x00000027 EDESTADDRREQ Destination address required

40 0x00000028 EMSGSIZE Message too long

41 0x00000029 EPROTOTYPE Protocol wrong type for socket

42 0x0000002A ENOPROTOOPT Protocol not available

43 0x0000002B EPROTONOSUPPORT Protocol not supported

44 0x0000002C ESOCKTNOSUPPORT Socket type not supported

45 0x0000002D EOPNOTSUPP Operation not supported

46 0x0000002E EPFNOSUPPORT Protocol family not supported

47 0x0000002F EAFNOSUPPORT Address family not supported by

protocol family

48 0x00000030 EADDRINUSE Address already in use

Appendix

Beckhoff Device Manager 145Version: 4.9

Decimal Hexadecimal Name Description

49 0x00000031 EADDRNOTAVAIL Can´t assign requested address

50 0x00000032 ENETDOWN Network is down

51 0x00000033 ENETUNREACH Network is unreachable

52 0x00000034 ENETRESET Network dropped connection on

reset

53 0x00000035 ECONNABORTED Software caused connection abort

54 0x00000036 ECONNRESET Connection reset by peer

55 0x00000037 ENOBUFS No buffer space available

56 0x00000038 EISCONN Socket is already connected

57 0x00000039 ENOTCONN Socket is not connected

58 0x0000003A ESHUTDOWN Can´t send after socket shutdown

60 0x0000003C ETIMEDOUT Operation timed out

61 0x0000003D ECONNREFUSED Connection refused

62 0x0000003E ELOOP Too many levels of symbolic links

63 0x0000003F ENAMETOOLONG File name too long

64 0x00000040 EHOSTDOWN Host is down

65 0x00000041 EHOSTUNREACH No route to host

66 0x00000042 ENOTEMPTY Directory not empty

67 0x00000043 EPROCLIM Too many processes

68 0x00000044 EUSERS Too many users

69 0x00000045 EDQUOT Disc quota exceeded

70 0x00000046 ESTALE Stale NFS file handle

72 0x00000048 EBADRPC RPC struct is bad

73 0x00000049 ERPCMISMATCH RPC version wrong

74 0x0000004A EPROGUNAVAIL RPC prog. Not avail

75 0x0000004B EPROGMISMATCH Program version wrong

76 0x0000004C EPROCUNAVAIL Bad procedure for program

77 0x0000004D ENOLCK No locks available

78 0x0000004E ENOSYS Function not implemented

79 0x0000004F EFTYPE Inappropriate file type or format

80 0x00000050 EAUTH Authentication error

81 0x00000051 ENEEDAUTH Need authenticator

82 0x00000052 EIDRM Identifier removed

83 0x00000053 ENOMSG No message of desired type

84 0x00000054 EOVERFLOW Value too large to be stored in data

type

85 0x00000055 ECANCELED Operation canceled

86 0x00000056 EILSEQ Illegal byte sequence

87 0x00000057 ENOATTR Attribute not found

88 0x00000058 EDOOFUS Programming error

89 0x00000059 EBADMSG Bad message

90 0x0000005A EMULTIHOP Multihop attempted

91 0x0000005B ENOLINK Link has been severed

92 0x0000005C EPROTO Protocol error

93 0x0000005D ENOTCAPABLE Capabilities insufficient

94 0x0000005E ECAPMODE Not permitted in capability mode

95 0x0000005F ENOTRECOVERABLE State not recoverable

96 0x00000060 EOWNERDEAD Previous owner died

97 0x00000061 EINTEGRITY Integrity check failed

Appendix

Beckhoff Device Manager146 Version: 4.9

8.7 FreeRTOS error codes

The following table contains a list of the FreeRTOS error codes.

Appendix

Beckhoff Device Manager 147Version: 4.9

Decimal Hexadecimal Constant Description

0 0x00000000 pdFREERTOS_ERRNO_NONE No such file or directory

2 0x00000002 pdFREERTOS_ERRNO_ENOENT No such file or directory

5 0x00000005 pdFREERTOS_ERRNO_EIO I/O error

6 0x00000006 pdFREERTOS_ERRNO_ENXIO No such device or address

9 0x00000009 pdFREERTOS_ERRNO_EBADF Bad file number

10 0x0000000A pdFREERTOS_ERRNO_EAGAIN No more processes

11 0x0000000B pdFREERTOS_ERRNO_EWOULDB

LOCK

Operation would block

12 0x0000000C pdFREERTOS_ERRNO_ENOMEM Not enough core

13 0x0000000D pdFREERTOS_ERRNO_EACCES Permission denied

14 0x0000000E pdFREERTOS_ERRNO_EFAULT Bad address

16 0x00000010 pdFREERTOS_ERRNO_EBUSY Mount device busy

17 0x00000011 pdFREERTOS_ERRNO_EEXIST File exists

18 0x00000012 pdFREERTOS_ERRNO_EXDEV Cross-device link

19 0x00000013 pdFREERTOS_ERRNO_ENODEV No such device

20 0x00000014 pdFREERTOS_ERRNO_ENOTDIR Not a directory

21 0x00000015 pdFREERTOS_ERRNO_EISDIR Is a directory

22 0x00000016 pdFREERTOS_ERRNO_EINVAL Invalid argument

28 0x0000001C pdFREERTOS_ERRNO_ENOSPC No space left on device

29 0x0000001D pdFREERTOS_ERRNO_ESPIPE Illegal seek

30 0x0000001E pdFREERTOS_ERRNO_EROFS Read only file system

42 0x0000002A pdFREERTOS_ERRNO_EUNATCH Protocol driver not attached

50 0x00000032 pdFREERTOS_ERRNO_EBADE Invalid exchange

79 0x0000004F pdFREERTOS_ERRNO_EFTYPE Inappropriate file type or format

89 0x00000059 pdFREERTOS_ERRNO_ENMFILE No more files

90 0x0000005A pdFREERTOS_ERRNO_ENOTEMP

Directory not empty

91 0x0000005B pdFREERTOS_ERRNO_ENAMETO

OLONG

File or path name too long

95 0x0000005F pdFREERTOS_ERRNO_EOPNOTS

UPP

Operation not supported on

transport endpoint

105 0x00000069 pdFREERTOS_ERRNO_ENOBUFS No buffer space available

109 0x0000006D pdFREERTOS_ERRNO_ENOPROT

OOPT

Protocol not available

112 0x00000070 pdFREERTOS_ERRNO_EADDRIN

USE

Address already in use

116 0x00000074 pdFREERTOS_ERRNO_ETIMEDO

Connection timed out

119 0x00000077 pdFREERTOS_ERRNO_EINPROG

RESS

Connection already in progress

120 0x00000078 pdFREERTOS_ERRNO_EALREAD

Socket already connected

125 0x0000007D pdFREERTOS_ERRNO_EADDRNO

TAVAIL

Address not available

127 0x0000007F pdFREERTOS_ERRNO_EISCONN Socket is already connected

128 0x00000080 pdFREERTOS_ERRNO_ENOTCON

Socket is not connected

135 0x00000087 pdFREERTOS_ERRNO_ENOMEDI

No medium inserted

138 0x0000008A pdFREERTOS_ERRNO_EILSEQ An invalid UTF-16 sequence was

encountered

Appendix

Beckhoff Device Manager148 Version: 4.9

Decimal Hexadecimal Constant Description

140 0x0000008C pdFREERTOS_ERRNO_ECANCEL

Operation cancelled

8.8 Support and Service

Beckhoff and their partners around the world offer comprehensive support and service, making available fast

and competent assistance with all questions related to Beckhoff products and system solutions.

Download finder

Our download finder contains all the files that we offer you for downloading. You will find application reports,

technical documentation, technical drawings, configuration files and much more.

The downloads are available in various formats.

Beckhoff's branch offices and representatives

Please contact your Beckhoff branch office or representative for local support and service on Beckhoff

products!

The addresses of Beckhoff's branch offices and representatives round the world can be found on our internet

page: www.beckhoff.com

You will also find further documentation for Beckhoff components there.

Beckhoff Support

Support offers you comprehensive technical assistance, helping you not only with the application of

individual Beckhoff products, but also with other, wide-ranging services:

• support

• design, programming and commissioning of complex automation systems

• and extensive training program for Beckhoff system components

Hotline: +495246963-157

e-mail: [email protected]

Beckhoff Service

The Beckhoff Service Center supports you in all matters of after-sales service:

• on-site service

• repair service

• spare parts service

• hotline service

Hotline: +495246963-460

e-mail: [email protected]

Beckhoff Headquarters

Beckhoff Automation GmbH & Co. KG

Huelshorstweg 20

33415 Verl

Germany

Phone: +495246963-0

e-mail: [email protected]

web:

www.beckhoff.com

Beckhoff Automation GmbH & Co. KG

Hülshorstweg 20

33415 Verl

Germany

Phone: +49 5246 9630

[email protected]