Quick Start Guide: AM-USB-WIFI/AM-USB-WIFI-I

The AM-USB-WIFI and AM-USB-WIFI-I are USB dongles that enable the use of Miracast®

projection technology with the AM-200 and AM-300 presentation systems and the CCS-UC-1

Crestron Mercury® UC Tabletop Conferencing System. Miracast is built into the Microsoft®

Windows® 10 operating system, so no software installation is necessary.

NOTES:

• The AM-USB-WIFI and AM-USB-WIFI-I are functionally identical. The AM-USB-WIFI-I

model is sold outside of the United States. In this document, the term “AM-USB-WIFI”

denotes both versions of the product.

• When using the AM-USB-WIFI or the AM-USB-WIFI-I with the AM-200

or AM-300, the ZUMMESH-AVBRIDGE, ZUMMESH-KP10AMBATT, and

ZUMMESH-PIR-OCCUPANCY-BATT are not supported.

Check the Box

Item Qty

AM-USB-WIFI 1

AM-USB-WIFI-I 1

Installation

AM-200/AM-300 Installation

Insert the AM-USB-WIFI into the USB port on the AM-200 or AM-300.

AM-200 Installation

AM-USB-WIFI

AM-300 Installation

AM-USB-WIFI

CCS-UC-1 Installation

Insert the AM-USB-WIFI into the USB/ACC port on the CCS-UC-1.

AM-USB-WIFI

Configuration

NOTE: The configuration of this device requires a working knowledge of the AM-200, AM-300,

or the CCS-UC-1. Refer to the AM-200/-300 Product Manual (Doc. 8254F) or the CCS-UC-1

Supplemental Guide (Doc. 7844K) at crestron.com/manuals for further information regarding

each product.

Use a web browser to navigate to the IP address or host name of the host device.

1. After signing in, click on the AIRMEDIA link in the left-hand pane.

2. In the Miracast section, set Miracast to Enabled. A dialog box prompting a device reboot

will appear after Miracast is enabled. Select Yes.

3. Set the Default Windows Experience to Miracast so that instructions tailored to Miracast

will appear when starting the presentation. A dialog box prompting a device reboot will

appear after Miracast is set as the Default Windows Experience. Select Yes.

4. Set WiFi Direct Mode to Enabled so that if the initial LAN connection fails, a Wi -Fi point to

point connection will occur.

NOTES:

• If WiFi Direct Mode is enabled, Login Code Mode must be set to Random or to Use

the following code, where a fixed code is entered to login.

• For the best user experience, Crestron highly recommends setting WiFi Direct Mode

to enabled.

NOTE: For Miracast network requirements, best practices, and troubleshooting, refer to the

AirMedia Deployment Guide (Doc. 7693K) at crestron.com/manuals.

AM-USB-WIFI/AM-USB-WIFI-I

AirMedia® USB Adapter with Wi-Fi® Connectivity

Operation

Connect to the Device

To connect to an AM-200, AM-300, or CCS-UC-1 with a Windows 10 device, do the following:

1. On a Windows 10 device, use the Windows Logo Key +K keyboard shortcut to search for

Miracast capable receivers. A list of capable receivers will appear in a pop-up menu on the

right-hand side of the screen.

2. Click on the name of the desired receiver. In the image above, the Crestron Mercury UC

Tabletop Conferencing System (CCS -UC-1) is used as an example.

3. Enter the authentication code displayed on the CCS-UC-1 or the AM-200/-300 and connect

to the receiver. Content will be shown on the display device once connected.

NOTES:

• Crestron recommends Windows 10 version 1809 or newer for complete support of

Miracast. Windows 10 version 1703 is the minimum supported version for Miracast

capability. Previous versions may not ask for an authentication code when connecting.

• Miracast devices use Wi-Fi® based discovery. After discovering a device, Windows 10

will first attempt to connect to the Miracast receiver via any existing infrastructure. If

the connection over infrastructure fails, Windows 10 will then establish the Miracast

session using a standard Wi-Fi Direct® connection.

Configuration

Once connected, the user may alter the projection settings.

1. Click on Change Projection Mode. A list of different projection methods will appear in place

of the receiver list.

2. Click on the desired projection method from the list.

Disconnect the Device

The user can disconnect by clicking the Disconnect button.

Additional Information

Scan or click the QR code for detailed product information.

AM-USB-WIFI AM-USB-WIFI-I

Compliance and Legal

Original Instructions: The U.S. English version of this document is the original instructions. All other languages are a translation

of the original instructions.

Regulatory Model: M201926001

FCC ID: 2AKC6XHT-WF5E

As of the date of manufacture, the product has been tested and found to comply with specifications for CE marking.

Federal Communications Commission (FCC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not

cause harmful interference and (2) this device must accept any interference received, including interference that may cause

undesired operation.

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, please

visit www.crestron.com/opensource.

Crestron, the Crestron logo, AirMedia, and Crestron Mercury are either trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and/or other countries. Microsoft and Windows are either trademarks or registered

trademarks of Microsoft Corporation in the United States and/or other countries. Miracast, Wi-Fi, and Wi-Fi Direct are either

trademarks or registered trademarks of Wi-Fi Alliance in the United States and/or other countries. HDMI is either a trademark

or registered trademark of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered

trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or

their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for

errors in typography or photography.

Crestron Electronics, Inc.

15 Volvo Drive, Rockleigh, NJ 07647

Tel: 888.CRESTRON

Fax: 201.767.7576

www.crestron.com

Quick Start - Doc. 8494A

(2054221)

07/2 3/19

Specifications subject to

change without notice.