Infinity-Z shower door installation manual

®

INSTALLATION CERTIFICATION PROGRAM

FOR PROFESSIONAL INSTALLERS

ARE YOU A PROFESSIONAL INSTALLER?

Did you know that DreamLine offers a free certification course for professional installers?

DreamLine's Installer Certification Program can increase your visibility in the marketplace with a

preferred listing on our website to grow your business. Training classes are held at our company

headquarters in Warminster PA. Professional installers are encouraged to send an email to:

[email protected] for complete details on how to apply to become a DreamLine Certified Installer.

• This cover page contains information for professional

installers only

• The installation manual begins on the next page

ICP promo supplement Ver 1w 072019

®

• Infinity-Z• Unidoor • Enigma-X • Prism • Aqua Lux

1-866-731-2244

For more information about DreamLine

®

products please visit DreamLine.com

INFINITY-Z

SHOWER DOOR INSTALLATION INSTRUCTIONS

®

INFINITY-Z MANUAL CHOICE COVER PAGE Ver 1 012020

Wall Profile

with Flange

Wall Profile

without Flange

OR

Wall Profile WITH Flange:

INFINITY-Z Manual Ver 4 Rev 5 062017

Wall Profile WITHOUT Flange:

INFINITY-Z Manual Ver 5 Rev 2 012020

OR

CHOOSE the APPROPRIATE MANUAL for your model version

!

INFINITY-Z

SHOWER DOOR / TUB DOOR INSTALLATION INSTRUCTION

IMPORTANT

DreamLine

®

reserves the right to alter, modify or redesign products at any time without prior notice.

For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer

to your model’s web page on DreamLine.com

For more information about DreamLine

®

Shower Doors, Tub Doors & Enclosures, please visit DreamLine.com

MODEL #s

SHDR-0960580-##

SHDR-0948720-##

SHDR-0960720-##

SHDR-0954720-##

SHDR-0954720-##-FR

##=finish

01-Chrome

04-Brushed Nickel

06-Oil Rubbed Bronze

FR-Frosted Glass

INFINITY-Z manual Ver 4 Rev 5 06/2017

Parts List

Installation Steps

Wheel Assemblies

Table of Contents

Section title

Page #

Tools

Preparation

Vinyl Seals

Product maintenance

6-13

5

3

2

11

12

14

INFINITY-Z manual Ver 4 Rev 5 06/2017

Preparation

1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece

count with the packing slip. After opening all boxes and packages read this introduction carefully.

Check that all of the necessary parts are included in the package by checking off the components on

the “Detailed Diagram of Shower Door Components”. If the unit has been damaged, has a finishing

defect, or has missing parts, please contact our customer support department within 3 business days

of the delivery date. Please note that DreamLine

®

will not replace any damaged products or

missing parts free of charge after 3 business days or if the product has been installed. Contact

DreamLine

®

if you have any questions, and please provide an order number, job name or other proof of

purchase to help identify the original order.

2. Please note that you should consult your local building codes with questions on installation

compliance standards. Building and plumbing codes may vary by location, and DreamLine

®

is not

responsible for code compliance standards for your project and will not accept any returns.

3. If this unit is going to be installed in a new construction, please install all of the required plumbing

and drainage before installing the shower. Use a competent and licensed (if required by local code)

plumber for all plumbing installation.

4. Please make sure that prior to beginning the installation, the surfaces are leveled and solid and will

be able to support the total weight of the unit. Also make sure the walls are at right angles. Irregular

installation surface level, radius corners or improper angle of side walls will result in serious problems

for your installation. Note that some adjustments and drilling will be necessary during the installation

process.

5. Please protect all primary surfaces of the product during installation. Never set the glass down

directly onto a tile floor. Leave corner protectors in place until necessary to remove them. Always use a

piece of wood or cardboard to protect the bottom edge and corners of the glass prior to and during

installation.

6. This unit must be installed upon a finished threshold and against finished walls.

7. This model has 1” of adjustment per wall profile for out-of-plumb wall conditions and overall width

within the model size. Confirm the finished opening conditions before proceeding with the installation.

8. This model requires a minumum of 1” of flat threshold space for installation.

9. Professional installation recommended.

NOTE: This manual will describe the shower door installation. Please follow the same sequence of

installation steps for the tub door installation.

NOTE: This door is reversible for right or left-hand door installation. The right-hand door

installation is shown as an example throughout this manual. For the left–hand door installation,

flip the assembly top to bottom so that the panel is on the right side (see Step #9).

NOTE: For models with frosted glass: the textured surface must face the outside of the shower.

2INFINITY-Z manual Ver 4 Rev 5 06/2017

!

Tools

Tip: Measure the finished opening before

proceeding with the installation to be sure

that the correct model size has been

ordered.

Tip: Prior to installation, cover the

shower/tub drain with tape to prevent

losing screws or small parts.

Tip: Set screw gun clutch to low setting

when installing screws and bolts to

prevent stripping the heads.

NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed

diagram and packing list in this manual as a reference. Before discarding the carton, check for small

hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,

please contact DreamLine

®

for replacement. The shipping boxes may contain extra parts not used in

your model configuration.

NOTE: Retain these installation instructions for future reference.

INFINITY-Z manual Ver 4 Rev 5 06/2017 3

Tape

Measure Pencil

Screwdriver

Phillips

Level

Silicone/Caulk

Hammer

Miter saw or Hacksaw

(Ø=1/8")

Drill bit

(Ø=5/16")

Drill bit

(D=8mm)

(D=3mm)

Drill

Power

W

Top

Middle

Bottom

Detailed Diagram of shower door components

INFINITY-Z manual Ver 4 Rev 5 06/2017 4

123

4

5

6

7

8

9101112

13

14

15

16

17

18

Parts List

INFINITY-Z manual Ver 4 Rev 5 06/2017 5

PART#

DESCRIPTION

QTY

01

Glass profile

2pcs

02

Wall profile

03

Guide rail (top and bottom)

04

05

06

07

08

09 Truss head screw ST4.2×40

Single side strip

Anti-water strip (2 long, 1 short)

Handle

Stationary glass

Glass door

1pc

3pcs

1pc

8pcs

10

11

12

13

14

15

16

17

18

Round head screw ST4.2x25

8pcs

PART#

DESCRIPTION

QTY

Round head screw ST4.2x10

4pcs

Flat head screw ST4.2x16

2pcs

Decorative cover (with washer)

4pcs

Wall anchor

8pcs

Seal gasket

1pc

Glass holder

2p

cs

Wheel assembly (top & bottom)

2pair

Towel bar

1pc

2pcs

1pc

NOTE: DO NOT install the towel bar or handle onto the glass until instructed to do so.

DO NOT lift the glass using the towel bar or handle. This could result in damage to the glass

and/or serious personal injury. Always use an assistant or a professional grade glass suction cup

when handling heavy glass.

!

Installation steps

INFINITY-Z manual Ver 4 Rev 5 06/2017 6

TIP: For easier installation into the opening, cut off an extra 1/4”:

FINISHED OPENING (W) - 3-5/8”= FINISHED CUT LENGTH “D”

Fig 1

Fig 2

Fig 3

W

Bottom

Middle

Top

Panel end

Door end

D

FINISHED OPENING - 3-3/8"=FINISHED CUT LENGTH “D”

NOTE: The Top and Bottom Guide Rails (#03)

are shorter than the model size by design. They

have been precut for your model width and are

made to fit between the wall profiles, (not wall to

wall). See the table below:

48” (for shower) 44-5/8”

54” (for shower) 50-5/8”

60” (for shower) 56-5/8”

60” (for tub) 56-5/8”

Model Size

Precut

Rail Length

2. Subtract 3-3/8” from your finished opening (W) to

determine the finished cut length for the Top and

Bottom Guide Rails (#03). Cut the Top and Bottom

Guide Rails (#03) to the finished cut length “D”.

Cut from the door end only, (which is the end farthest

from the glass holder hole) and cut each rail to the same

length from the same end. (Fig 2 and Fig 3)

1. Measure the distance between the two finished

walls at the top (at model height: 58” or 72”), middle

and bottom. The wall profiles will adjust for

out-of-plumb conditions, so use the smallest

measurement as the “finished opening”

dimension to determine the finished cut length in

Step #2. (Fig 1)

INFINITY-Z manual Ver 4 Rev 5 06/2017 7

Fig 4

Fig 5

1

2

3-1/8"

Ø1/8"

ATTENTION: Do Not drill the Guide Rail

throughout, only through the first layer.

TIP: For ease of assembly, add some liquid soap, wax or lubricant to the screws prior to

attaching the glass profiles to the guide rails. Use a low setting on your power drill to

prevent stripping the screws.

!

4. Secure the Bottom Guide Rail (#03) to the Glass Profiles (#01) with the Round Head Screws

ST4.2x25 (#10). (Fig 5)

3. After the Top and Bottom Guide Rails (#03)

have been cut, you will need to re-install the

roller stopper on each Top and Bottom Guide

Rails (#03) on the end that has been cut off (the

door end).

Remove the existing stopper. Mark the drilling

hole at the distance of 3-1/8” from the cut end

of the Top and Bottom Guide Rails (#03).

Drill a new hole using a Ø1/8” drill bit; then

re-secure the stopper with the screw. (Fig 4)

(Bottom Guide Rail shown)

INFINITY-Z manual Ver 4 Rev 5 06/2017 8

Fig 7

Fig 6

Inside

ATTENTION: To prevent scratching or

damaging the glass and aluminum: Do Not use

a screwdriver or other metal object to insert the

Single Side Strip (#08)

!

Bottom rail

cut away to

show detail

add a bead of

silicone to the

bottom rail (optional)

prior to installing the

stationary glass

!

NOTE: Use caution when installing the stationary

glass into the frame to prevent damage to the

edges of the glass.

6. Starting from the bottom, insert the Single Side Strip (#08)

into the groove between the glass and the glass profile using a

wooden or plastic shim. The strip should be inserted from the

side that will face inside the shower.

7. Repeat Step #3, Step #4, Step #5 and Step #6 to fasten the

Top Guide Rail (#03) to the Glass Profiles (#01) and secure the

Stationary Glass (#05) with the remaining Glass Holder (#16)

and Flat Head Screw ST4.2 x 16 (#12). (Fig 7)

5. Slide the Stationary Glass (#05) fully into the groove

of the Glass Profile (#01), and then secure the Glass

Holder (#16) to the Bottom Guide Rail (#03) with the

Flat Head Screw ST4.2x16 (#12). (Fig 6)

INFINITY-Z manual Ver 4 Rev 5 06/2017 9

Fig 7

Fig 8

Fig 9

Fig 8

Inside

*NOTE: At this step you can reverse the handing

of the installation by flipping the assembly top to

bottom so that the panel is on the right side.

*NOTE: Before installing the frame assembly, put

the Door Glass into the shower area and lean it

against the wall with the handle holes on the

correct side for the installation.

After the frame assembly and panel glass are

installed, it may not be possible to easily get the

door glass into the shower. Always use padding

to protect the glass and shower surfaces.

!

9. Move the assembled frame into the designated

position on the shower base*, bathtub or threshold

(depending on your installation), and push the Wall

Profiles (#02) tight to the walls to compensate for any

out-of-plumb conditions.

Push the bottom rail down tight to the threshold and

adjust the frame to a vertical position. Confirm with a

level before marking the holes for drilling. (Fig 9)

8. Slide the Wall Profiles (#02) all the way onto the Glass Profiles (#01) on both sides. Make sure the

flange of the wall profile faces inside the shower. (Fig 8)

INFINITY-Z manual Ver 4 Rev 5 06/2017 10

Fig 11

Fig 10

1 2

3

4

5

Ø5/16"

Outside

NOTE: Towel Bar must be installed on the outside of the Stationary Glass.

!

11. Attach the Towel Bar (#18) to the outside of the Stationary Glass (#05). (Fig 11)

10. Use a helper to hold the assembly in position and mark the drill holes on the wall through the

holes on the flange of the Wall Profiles (#02).

Gently set the assembled unit aside; drill the holes using a Ø5/16” drill bit and insert the Wall

Anchors (#14).

Apply silicone along the Wall Profile (#02) and around the holes on the wall. Also apply silicone

caulk under the Bottom Guide Rail (#03). Place the entire shower assembly back into the designated

position and secure it to the walls using the Truss Head Screws ST4.2×40 (#09). (Fig 10)

INFINITY-Z manual Ver 4 Rev 5 06/2017 11

Fig 12

Fig 13

Inside

4

1

5

2

3

6

1 4

NOTE: The lock nut of the upper wheel (Fig 12.4) and the press button of the bottom wheel (Fig 12.1)

should be pointing up.

NOTE: Do not overtighten the wheels.

!

2

3

13. From inside of the shower, insert the bottom Wheel Assemblies (#17) into the Bottom Guide Rail

(#03), lift the door up and snap the top Wheel Assemblies (#17) into the Top Guide Rail (#03).

Test the operation of the door, and if necessary, use a #2 Phillips screwdriver (do not use a power

screwdriver) to adjust the upper wheels so the door rolls smoothly and the closes tight. (Fig 13)

12. Fasten the top and the bottom Wheel Assemblies (#17) to the Door Glass (#04). The top wheels

can adjust the door level using the adjustable bolt and lock nut. The bottom wheel has a press button

to fix the wheel onto the Bottom Guide Rail (#03). The wheels must face towards the outside of

the shower. Be sure that the handle holes are on the correct side for the installation. (Fig 12)

INFINITY-Z manual Ver 4 Rev 5 06/2017 12

Fig 14

Fig 15

Outside

1

2

3

Ø1/8"

1

2

3

3/4”

TIP: The longer Anti-Water Strips (#07) attach to the edges of the Door Glass (#04) and the

shorter strip attaches to the edge of the Stationary Glass (#05).

ATTENTION: Do Not drill the profiles throughout, only through the first layer

of the wall and glass profiles.

!

15. Perform the final adjustments of the assembled unit in the Wall Profiles (#02) making sure that

the bottom rail is tight to the threshold.

Drill the holes in the center of the Wall Profile (#02) into the Glass Profile (#01) using a Ø1/8” drill

bit. (Fig 15)

Secure the Wall Profile (#02) to the Glass Profile (#01) using the Round Head Screws

ST4.2×10 (#11) and raised white washers.

Cover the exposed screw heads with the Decorative Covers (#13).

14. Install the Handle (#06) to the Door Glass (#04).

Press the Anti-Water Strips (#07) onto the vertical edges of the Stationary Glass (#05) and both

vertical edges of the Door Glass (#04). Insert the Seal Gasket (#15) into the Glass Profile (#01)

starting from the bottom (Fig. 14.3). (Fig 14)

INFINITY-Z manual Ver 4 Rev 5 06/2017 13

24

Hours

Fig 16

Waterproof

silicone

16. Apply good quality mildew-resistant silicone along the profiles and guide rails; on the seams

between the bottom guide rail and the profiles as well as along the shower base or threshold. Allow

24 hours for the silicone to cure before using the shower. (Fig 16)

Product Maintenance

BASES and BACKWALLS: To ensure long-lasting life for your acrylic back walls, wipe them off

after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream

based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal

brushes or scrapers that could scratch or dull the surface.

GLASS: To ensure long-lasting life for your glass shower products, wipe them off after each use

with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent

soap buildup and water spots (Hard water can etch the surface of the glass over time if left to

dry). To prevent scratching the surface: never use abrasive cleaners or cleaning products that

contain scouring agents. Never use bristle brushes or abrasive sponges that may scratch the

surface.

HARDWARE: To ensure a long-lasting finish, wipe off the metal parts after each use with a soft

cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If

accidentally used, rinse the surface as soon as possible to prevent damage to the finish (peeling

or corrosion). After cleaning the polished finishes, rinse thoroughly and wipe dry with soft cloth.

Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or

polish to stainless steel hardware, work with (not across) the grain. Never use an abrasive

sponge or cloth, steel wool or wired brush as these may permanently scratch the surfaces.

NOTE: To maximize the life of your door, it is important to regularly inspect

the glass and all hardware for misalignment, proper attachment, and/or

damage. Contact DreamLine

®

with any questions or concerns.

DreamLine

®

shower doors and enclosures are designed not to leak when

installed properly and the flow of water is not pointed directly at the vinyl

seals.

INFINITY-Z manual Ver 4 Rev 5 06/2017 14

TEL: 866-731-2244

FAX: 866-857-3638

DREAMLINE.COM

For more information on DreamLine

®

Shower Doors and Enclosures please visit DreamLine.com

®

PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION

IMPORTANT!

DreamLine

®

reserves the right to alter, modify or redesign products at any time without prior notice for the

purpose of product improvement and customer experience. Please refer to the model’s web page on

DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional

product details.

INFINITY-Z

SHOWER AND TUB DOOR INSTALLATION INSTRUCTIONS

Do Not Return Product to the Store. Contact DreamLine® with any questions

MODEL #s

SHDR-0948720-##

SHDR-0954720-##

SHDR-0960720-##

MODEL #s

SHDR-0960580-##

## = finish

01-Chrome

04-Brushed Nickel

06-Oil Rubbed Bronze

FR-Frosted Glass

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

Left-hand door installation shown

®

Installation Date

OD Number

(optional)

SKU Number

located on the shipping box or label

if available.

Purchase Order

Number

Store/Vendor

Purchased From

Installed By:

Record the following purchase information for your records or in the event you need to contact DreamLine

®

:

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

®

Table of Contents

Section Title Page #

General Preparations and Warnings 2

Model Specific Preparation 3

Adjustable Wall Profile System 4

Tools 5

Detailed Diagram of Shower Door Components 6

Parts List 7-8

Installation Steps 9-24

Top and Bottom Roller Assembly Installation 20-21

Handle and Vinyl(s) Installation 22

Decorative Cover with Washer Installation 23

Product Maintenance 25

Troubleshooting 26

Factory Parts Information 27-33

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

Symbol Legend

!

TIP

NOTE

TIP - for ease of installation.

NOTE - take note of special

feature; additional information.

INCORRECT -

not recommended.

CORRECT -

recommended.

REQUIRED - requires

special attention;

signifies a warning.

Average Installation Time

1 hour

®

WARNING DISCLOSURE STATEMENT

IMPORTANT

• DreamLine® reserves the right to alter, modify or redesign products any time without

prior notice for product improvement and customer experience. Please refer to the

model’s web page on DreamLine.com for the latest technical drawings, installation

manuals, warranty information or additional product details.

• This product should be installed by someone familiar with the construction requirement

s

for this type of project and the care necessary for the safe installation and operation of

the product.

• The safety of any installation is the responsibility of the installer.

• Professional installation recommended.

(All Models)

• Professional installation required.

(Enigma Series)

• To prevent damage or serious injury, Do Not lean against the installed panel/door/glass.

• To prevent damage or serious injury: Do Not attempt to lift or move a heavy lite of glass

alone. Use an assistant and/or a professional grade glass suction cup.

• The installation of some models may require drilling down into the threshold. Contact the

manufacturer of the base, tub, or threshold materi

al with any questions regarding the

drilling of holes into their product.

• All drawings in this installation manual are for illustrative purposes only and are not drawn

to scale.

T

EMPERED GLASS WARNING

• Your Shower Door Glass Could Shatter Without Warning if Improperly Installed or

Mishandled

• Do Not install or operate a shower door if the glass has chipped corners, slivered edges or

is otherwise damaged and/or has been dropped or banged into a hard surface such as

tile, marble or glass.

• The main causes of tempered glass breakage are:

o Improper handling, storage or installation

o Misuse/abuse

o Lack of maintenance

o Failure to replace damaged glass

o Improper handling during storage, unpacking and installation:

o Corners and edges are the most susceptible area to damage on a lite of tempered

glass and should be protected and handled with care during storage, unpacking,

installation and operation. A concentrated point of pressu

re or impact with a surface

harder than itself may cause the tempered glass to shatter. The tempered glass may

release immediately, within several hours or even days later.

o Incorrect installation of door hardware, rollers, hinges, channels, stopper or glass:

o Improper installation may include: loose hardware and/or lack of proper gaskets

between the hardware and glass. Additionally, improper al

ignment of guide rails, wall

profiles or other hardware during installation or operation may place stress on the

glass edges and cause it to break.

o This product must be installed by a professional and experienced installer familiar with

the safe handling of tempered glass.

o Improper use of this product:

o Aggressively opening or closing the door may cause trauma to the glass, which can

lead to

breakage. This may occur immediately or hours or even days later.

o The shower door hardware and glass should be inspected periodically:

 Instruct the homeowner how to perform a periodic inspection of the shower

hardware and glass - some minor adjustments may be necessary based upon

the use (or misuse) of the shower door. Ensure that the hardware remains tight

and that the door alignment and o

peration are correct. Any adjustments

should be made upon discovery to prevent damage to the product.

 Additional considerations should be given to the installation of frameless

tempered glass products in households with young children or an elderly

person due to an increased chance of improper handling. In such cases,

alternatives such as shower curtains or grab bars should be considered.

GENERAL PREPARATION

• After opening all boxes and packages, read this introduction carefully. Check that all the

items are included in the package by marking off the components on the “Detailed

Diagram of Product Components” page. Examine all boxes and packages for shipping

damage. If the unit has been damaged, has a finishing defect, or is missing parts; please

contact our Customer Support department within 3 busine

ss days of the delivery date.

Please note that DreamLine® will not replace any damaged products or missing

parts free of charge after 3 business days or if the product has been installed. Please

contact DreamLine® if you have any questions.

• Please note that you should refer to your local building codes with questions on

installation compliance standards. Building and plumbing codes may vary by

location, and DreamLine® is not responsible for code compliance standards for your

project and will not accept any returns.

• If this unit is going to be installed in a new construction, install all the required plumbing

and drainage before installing the shower. Use a competent and licensed (if required

by local code) plumber for all plumbing installation.

• Make sure that prior to beginning the installation, the surfaces are leveled and solid and

will be able to support the t

otal weight of the unit. Also make sure the walls are at right

angles. Irregular installation surface level, radius corners or improper angle of side walls

will result in serious problems for your installation. Please note that some adjustments

and drilling will be necessary during the installation process.

• Protect all primary surfaces of the product during installation. Never set your glass dow

n

directly onto a tile floor. Leave corner protectors in place until it is necessary to remove

them. Always use a piece of wood or cardboard to protect the bottom edge and corners

of the glass prior to and during installation.

• This unit must be installed upon a finished threshold and against finished walls.

•

DreamLine

®

shower doors are not designed to be installed into a fiberglass surround due

to the radius corners and lack of a solid surface to mount the hardware.

WARNING: TO AVOID THE RISK OF DAMAGE OR INJURY:

• Follow all recommendations and requirements as shown in the installation

instructions.

• Perform a thorough inspection of the glass and all parts for any damage prior to

installation. Any damage to tempered glass can cause breakage.

Do Not install damaged glass!

• Do Not install or operate a shower or tub door if the glass has chipped corners, sl

ivered

edges or is otherwise damaged. Do Not install or operate a shower or tub door that has

been dropped or banged into a hard surface such as tile, marble or glass.

• CAUTION: Contact with any hard surface can damage tempered glass and cause it to

shatter.

• This product uses tempered glass. Glass cannot be cut after it has been tempered.

Do Not attempt to cut tempered glass.

• DreamLine

®

Glass Shower doors, Tub doors, Inline panels, and Return panels can shatter

due to improper handling or lack of maintenance. Conduct periodic inspections of glass

and all parts for possible damage, missing or loose parts.

• Always wear proper safety equipment such as: safety goggles, work gloves and

appropriate footwear during the installation process.

• WARNING. Risk of leakage and/or damage. Follow

all instructions regarding the

application of silicone sealant or caulk. Allow 24 hours for the sealant to cure before the

initial use of the shower or tub product. Follow the silicone manufacturer’s

recommendations regarding the use of their product.

• Thoroughly read these instructions before installing or using this product.

• Leave this manual for the end-user of the product.

!

This product should be installed by someone familiar with the

construction requirements for this type of project and the care

necessary for the safe installation and operation of the product.

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

2

®

Professional Installation

recommended.

Certied Professional

!

®

Model Specific Preparation

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 3

1” Out-of-Plumb

Adjustment; Verify

threshold and walls

with a level

Threshold must be

level

!

Threshold must be level

This model has a 1” adjustment

wall profile siystem for

Out-of-Plumb wall conditions and

overall width within model size

when placed into finished

opening. For more infomation, see

the Adjustment Wall Profile

System on page 4.

NOTE

For models with Frosted glass, install

the textured (Frosted) surface facing

towards the outside of the shower.

!

DO NOT attach the handle and/or

towel bar to the glass until instructed

to do so.

DO NOT attempt to use the

handle/towel bar to lift the glass

during installation. This may result in

damage to the glass and/or serious

injury. Always use a professional

grade glass suction cup and an

assistant.

Panel Panel

Door Door

L R

This door is reversible for right or left-hand door installation.

The left-hand door installation is shown as an example

throughout this manual. For the right-hand door installation,

flip the assembly from top to bottom so that the panel is on

the right side.

TIP

1” (25.4mm)

minimum

at threshold

±

0

.0

±

0

.0

±

0

.0

1” max

1”

minimum

threshold

®

Adjustable Wall Profile System

The Glass Profiles can be adjusted

within the Wall Profiles for overall

width or to correct for out-of-plumb

conditions within the model size.

Screw them together after making

final adjustments.

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 4

!

Wall Profile

Glass Profile

1” max

3/4”

Ø1/8”

washer (#14)

decorative

cap (#14)

ST4.0×10mm

Pan Head Screw (#10)

Wall Profile

Glass Profile

inside inside

inside

®

Tools

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 5

NOTE

TIP

To be sure that the correct model size has been ordered, measure

the finished opening before proceeding with the installation.

Cover the shower/tub drain with tape prior to installation to

prevent the loss of screws or small parts.

To prevent stripping the screw heads, set power

drill to a low setting when installing screws.

NOTE

Unpack your unit carefully and inspect it. Lay it out and identify all parts using the Detailed

Diagram on page 6 and the included packing list in this manual as a reference. Before

discarding the carton, check for small hardware bags that may have fallen to the bottom of

the box. If any parts are damaged or missing, please contact DreamLine

®

for replacement.

The shipping boxes may contain extra parts not used in your model configuration.

Retain these installation instructions for future reference.

Extender Driver Bit

Professional-grade

Glass suction cup

Work Gloves

Safety Glasses

Power

Drill

Hacksaw

Pencil

Tape

Measure

Soft Head

Hammer

Miter Saw

Level

Phillips

Screwdriver

Silicone

Ø3/16"

(4.76mm)

Drill Bit

Ø5/16"

(8mm)

Ø1/8"

(3mm)

Drill Bit

OR

Metal File

®

Detailed Diagram of Shower Door Components

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 6

Left-hand door installation shown

17b

06

01

02

03

17a

04

05

07

08

09

10

11

12

16

13

14

18

03

inside

®

Parts List

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 7

x1

04

05

03

06

07

08

09

11

12

01

02

x2

x3

x1

x2

x1

x8

x2

x4

Handle

Door Glass Inline Panel Glass

Push-in Glazing

Vinyl

Guide Rail

(Top and Bottom)

ST4.2x16mm

Flat Head Screw

ST4.0x10mm

Pan head screw

ST4.0x25mm

Pan Head screw

ST4.0×55mm

Pan Head Screw

Anti-water Strips

1 Short, 2 Long

10

Glass Profile

Wall Profile

®

Parts List

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 8

17a

18

x1

x2

Wheel Assembly

(Bottom)

16

17b

17a

13

14

x4

x2

x8

x2

15

x1

Towel Bar

Vinyl Insert

Wall Anchor

Glass Clip

Wheel Assembly

(Top)

Decorative Cover

(with washer)

®

Tools Needed

Installation Steps

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 9

NOTE

TIP

Use the smallest measurement from Fig 1 to determine

the finished cut length of the Guide Rails (#03).

Fig 1

Middle

Bottom

Top

*at model height

________”

W

The Top and Bottom Guide Rails (#03) are shorter than

the model size by design. They have been precut for the

model width and are designed to fit between the wall

profiles, (not wall-to-wall). See Table A below.

Model Size Precut Rail Length

48" (for shower) 44-5/8"

54" (for shower) 50-5/8"

60" (for shower) 56-5/8"

60" (for tub) 56-5/8"

Table A

1

®

Tools NeededParts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 10

Table B

Center

C

CUTTING FORMULA: FINISHED OPENING - 3-3/8"= FINISHED CUT LENGTH “D”

*for easier installation into the opening, cut off an additional 1/4”

Door Side

Panel Side

Hole for

Glass Clip

Centerline

of rail

TIP

Use a metal file

to deburr the

cut end

03

x2

D

!

Cut the Top and Bottom Guide Rails

(#03) from the Door End only, (which is

the end farthest from the Glass Clip hole)

and cut each rail to the same length (D)

from the same end.

Fig 2b

Fig 2a

Distance from the Glass

Bracket Hole to the:

Model Size Panel Side Door Side

48" model 21-3/8"

23-1/4"

54" model 23-7/8" 26-5/8"

60" model 26-7/8"

29-3/4"

Left-hand door

installation shown*

Left-hand door installation shown*

Cut From

the Door

End Only!

Door End

OR

C

hole for

Glass Clip

(o-center)

Glass Bracket

Hole

(o-center)

- =

MODEL SIZE

*from Table A

Finished

Opening (W)

Cut-off Length (C)

*from Door End only

Panel End

DO NOT Cut

from the

panel end!

Door End

C

Center

2

®

Tools NeededParts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 11

03

x2

Fig 3

3-1/8”

Ø1/8”

to the center

of the hole

1 2

3

door end

Door

End

Top Rail

Bottom Rail

3-1/8”

to the center

of the hole

to the center

of the hole

3

®

Tools NeededParts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 12

03

x2

x8

10

01

x2

Fig 4

TIP

For ease of installation: Add liquid soap, wax, or lubricant to the screws prior to

attaching the Glass Profiles (#01) to the Guide Rails (#03).

Use a low setting on the screw gun to prevent stripping the screws.

top

bottom

4

®

Parts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 13

inside

Holes in

both

profiles

must

line up

02

x2

Fig 5

1 2

NOTE

The holes in the Wall Profiles (#02) are off-center, and must

line up with the corresponding holes in the Glass Profiles (#01).

5

®

Tools Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 14

2

NOTE

At this step, decide on the handing of the door and panel

prior to placing the assembly into the opening to mark the

location of the holes for drilling. Flip the assembly so that the

Inline Panel Glass (#06) will be installed on the desired side

of the opening.

Before marking the holes for drilling,

confirm the assembled frame is tight to

the threshold, the Wall Profiles(#02)

are tight to the walls and the frame is

level and plumb.

Fig 6

1

NOTE

±

0

.0

±

0

.0

6

®

Tools NeededParts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 15

Ø3/16”

Drill Bit

*see NOTE

14

x8

Fig 7

1

2 3*

NOTE

If a stud is present behind the wall, drill a hole

using a Ø3/16” drill bit up to the stud, drill an

Ø1/8“ pilot hole into the stud and do not use

wall anchors.

If no stud is present, drill the hole using a

Ø5/16” drill bit and insert Wall Anchors (#14)

as shown in Fig 7.3.

7

®

Tools NeededParts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 16

04

x1

!

DO NOT install the towel bar or handle onto the

glass until instructed. DO NOT attempt to lift the

glass using the towel bar or handle. This could

result in damage to the glass and/or serious

personal injury. Always use an assistant or a

professional grade suction cup when handling

heavy glass.

!

Before securing the frame assembly, bring the Door Glass (#04)

into the shower area and lean it safely against the wall, using

padding to protect the glass, walls, and base. Make sure the

handle holes on the Door Glass (#04) are on the correct side for

installation. The Wheel Assemblies (#17a/17b) can be attached

prior to setting the glass into the shower. (see Step 11)

Fig 8

8

®

Tools NeededParts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 17

09

x8

Extender Driver Bit recommended

for the installation of these screws.

TIP

NOTE

The screwheads on the ST4.0×55 Pan Head

Screws (#09) will pass through the larger

holes in the Glass Profiles (#01) and then

secure the Wall Profiles (#02) to each wall.

bottom

rail

silicone

wall

profiles

wall wall

ST4.0×55

Overhead View

Fig 9

ST4.0×55

1

4

2

5

3

6

9

®

Tools NeededParts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 18

18

x1

16

x2

05

x1

!

Use caution when installing the

Inline Panel Glass (#05) into the

frame to prevent damage to the

edges of the glass.

outside

inside

Fig 10a

Fig 10b

NOTE

For models with Frosted glass, install

the textured (Frosted) surface facing

towards the outside of the shower.

1 2

inline panel glass

12

x2

10

®

Parts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 19

x1

08

!

To prevent scratching or damaging the glass and aluminum,

DO NOT use a screwdriver or other metal tool to install the

Push-in Glazing Vinyl (#08). Use a plastic putty knife or

similar if necessary.

Fig 11

Right-hand panel installation shown

inside

11

®

Tools NeededParts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 20

x4

17b

17a

x4

Fig 12

inside

NOTE

The lock nut on the Top Roller Assembly (#17a) and the push-button

on the Bottom Roller Assembly (#17b) should both be installed

pointing up. DO NOT overtighten the Roller Assemblies (#17a/17b).

Bottom Wheels

Top Wheels

Button faces upFaces DownFaces Up

door glass

*Left-hand door installation shown

12

®

Tools Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 21

adjust*

inside

*If necessary: Adjust the Top Roller

Assemblies (#17a) for smoother operation.

NOTE

Fig 13

1 2

3 4

bottom

top

align

and install

align and install

lift up

13

®

Parts Needed

Handle and Vinyl Installation

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 22

door glass

Inline Panel

Glass

15

x1

06

x1

07

x3

Fig 14

The longer Vertical Vinyl Seals (#07) attach to

the edges of the Door Glass (#04);

the shorter Vertical Vinyl Seal (#07) attaches

to the edge of the Inline Panel Glass (#05).

NOTE

door

panel

inside

door glass

outside

Left-hand door installation shown

14

®

Tools NeededParts Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 23

Fig 15

!

DO NOT drill the profiles throughout, ONLY through the

first layer of the Wall Profile (#02) and Glass Profile (#01).

inside

3/4”

Ø1/8”

wall

1

Decorative Cap (#13)

Washer (#13)

ST4.0×10mm Pan Head Screw (#11)

inside

2

wall

inside

3

wall

inside

4

wall

13

x4

11

x4

NOTE

The ST4.0×10mm Pan Head Screws (#11) and Decorative Covers (#13)

should be installed to both the top and bottom of each profile.

NOTE

Make sure that the bottom rail is tight to the threshold

before screwing the wall profiles and glass profiles together

15

®

Tools Needed

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 24

NOTE

The surfaces need to be clean and free of debris before applying silicone.

!

Allow 24 hours for the silicone caulk to cure before using shower.

Fig 16

24

Hours

16

®

Product Maintenance

INFINITY-Z Maintenance Checklist

◻ Check that the unit is stable, operates smoothly and that the installation is secure

◻ Confirm that all screws are tight

◻ Inspect the Roller Assemblies. Tighten if necessary

◻ Inspect Handle and towel bar. Tighten if necessary

◻ Inspect glass clips. Tighten if necessary

◻ Inspect and replace damaged or missing Vinyl Seals. Order replacement as necessary to prevent

leakage.

◻ Inspect silicone application. Remove and replace as necessary to prevent leakage. (refer to the

silicone manufacturer’s recommendations on the proper application of their product).

◻ Remove Vinyl Seals to inspect the edges of the glass for concealed damage.

Damaged glass must be replaced!

To maximize the life of your door, it is important to regularly inspect

the glass and other hardware for misalignment, proper attachment,

and/or damage. Contact DreamLine

®

with any questions or concerns.

NOTE

BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off

after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream

based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal

brushes or scrapers that could permanently scratch or dull the surface.

GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use

with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent

soap buildup and water spots (Hard water can etch the surface of the glass over time if left to dry).

To prevent scratching the surface: never use abrasive cleaners or cleaning products that contain

scouring agents. Never use bristle brushes or abrasive sponges that may scratch the surface of the

glass.

HARDWARE: To ensure a long lasting finish: wipe off all metal parts after each use with a soft

cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If

accidentally used, rinse the surface as soon as possible to prevent damage to the finish (peeling or

corrosion). After cleaning the polished finishes, rinse thoroughly and wipe dry with a soft clean-

cloth.

Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish

to stainless steel hardware, work with the grain (not across the grain). Never use an abrasive

sponge or cloth, steel wool or wired brush as these may permanently scratch the surfaces.

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 25

®

Troubleshooting

Prior to contacting DreamLine® Customer Service, please have the following information

readily available:

- Purchase Order Information

- Name, PO Number, Dealer/Vendor Name, etc.

- SKU/Model Number (see Pages 27-33)

- Factory Part Information (see Pages 27-33)

Problem/Symptom Suggested Solution Page(s)

Missing Parts

•Check all shipping/packaging material for missing

parts/components.

•If not found, contact DreamLine Customer Support [1-855-831-

2126] to order factory part replacement.

――

Leakage: underneath Bottom Guide Rail (#03)

•Make certain that the bottom rail is tight to the threshold and that

silicone is creating a seal along the entire length of the bottom rail.

•If the bottom rail is not making contact with the threshold, it may

be necessary to redo Steps 6-7 to create a better seal.

14-15

Leakage: Panel/Door Glass (#05/04)

•Starting from the bottom, confirm that the Push-in Glazing

Vinyl (#08) is correctly inserted into the glass profile. [see Fig 11]

•If possible, direct the flow of water away from the area.

19

Door Glass (#04) is not rolling smoothly/closing

tightly.

•Use a #2 phillips screwdriver to evenly adjust the Top Wheel

Assemblies (#17a) until the Door Glass (#04) rolls smoothly and

tightly closes. [see Fig 13.4]

20-21

Panel Glass (#05) shakes/rattles while in operation.

•Starting from the bottom, confirm that the Push-in Glazing

Vinyl (#08) is installed tightly between the Panel Glass (#05) and

Glass Profile (#01).

•Inspect the Glass Clips (#16) for correct installation and tighten if

necessary. [see Step 10]

18-19

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020 26

NOTE

®

Product Parts Information

Contact [email protected] for Part replacement, installation assistance or addtional information

Complete Warranty information is available on DreamLine.com

BOLD digit indicates finish: 1 = Chrome; 4 = Brushed Nickel; 06 = Oil Rubbed Bronze

FACTORY PARTS INFORMATION

ITEM

#

FACTORY PART NUMBER ITEM DESCRIPTION QTY

01

04002011-1830 / 04002041-1830 / 04002061-1830

Left or Right Glass Profile for 6mm (1/4in) Glass

2 pcs

02

04183011-1830 / 04183041-1830 / 04183061-1830

Left or Right Wall Profile

2 pcs

03

04001011-1134 / 04004011-1134 / 04006011-1134

Top or Bottom Guide Rail

2 pcs

04 010021014

Door Glass

1 pc

05 010022007

Inline Panel Glass

1 pc

06

07221006 / 07224006 / 07226006

Single Sided Curved Handle with Knob for 6mm (1/4in) Glass

1 pc

07a 063001060-1743

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for panel)

1 pc

07b 063001060-1814

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for door)

2 pcs

08 060001000-1765

Push-in Glazing Vinyl for 6mm (1/4in) Glass

1 pc

09 091131

ST4.0 × 55mm Pan Head Screw

11 pcs

10 091104

ST4.0 x 25mm Pan Head Screw

11 pcs

11 091101

ST4.0 x 10mm Pan Head Screw

7 pcs

12 092102

ST4.2 x 16mm Countersunk Screw (pre-

attached to #03)

4 pcs

12 092102

ST4.2 x 16mm Countersunk Screw

2 pcs

13

07551011 / 07554011 / 07556011

Decorative Cover and Washer

7 pcs

14 07550045

Wall Anchor 8mm (5/16in)

11 pcs

15 060007060-1800

Vinyl Insert for Glass Profile

1 pc

16

07551014 / 07554014 / 07556014

Glass Clip for 6mm (1/4in) Glass

2 pcs

17a

07341008 / 07344008 / 07346008

Single Roller Assembly (top) for 6mm (1/4in) Glass

2 pcs

17b

07341009 / 07344009 / 07346009

Single Roller Assembly (bottom) for 6mm (1/4in) Glass

2 pcs

18

07221024 / 07224024 / 07226024

Towel Bar Assembly for 6mm (1/4in) Glass

1 pc

--- 07550009

Roller Stopper (pre-attached to #03)

4 pcs

INFINITY-Z 48x72 Clear Glass

is correctly inserted into the glass profile. [see Fig 11]

tightly closes. [see Fig 13.4]

.

27INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

®

Product Parts Information

Contact [email protected] for Part replacement, installation assistance or addtional information

Complete Warranty information is available on DreamLine.com

BOLD digit indicates finish: 1 = Chrome; 4 = Brushed Nickel; 06 = Oil Rubbed Bronze

FACTORY PARTS INFORMATION

ITEM

#

FACTORY PART NUMBER ITEM DESCRIPTION QTY

01 04002011-1830 / 04002041-1830 / 04002061-1830

Left or Right Glass Profile for 6mm (1/4in) Glass

2 pcs

02 04183011-1830 / 04183041-1830 / 04183061-1830

Left or Right Wall Profile

2 pcs

03 04001011-1134 / 04004011-1134 / 04006011-1134

Top or Bottom Guide Rail

2 pcs

04 010021016

Door Glass

1 pc

05 010022008

Inline Panel Glass

1 pc

06 07221006 / 07224006 / 07226006

Single Sided Curved Handle with Knob for 6mm (1/4in) Glass

1 pc

07a 063001060-1743

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for panel)

1 pc

07b 063001060-1814

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for door)

2 pcs

08 060001000-1765

Push-in Glazing Vinyl for 6mm (1/4in) Glass

1 pc

09 091131

ST4.0 × 55mm Pan Head Screw

11 pcs

10 091104

ST4.0 x 25mm Pan Head Screw

11 pcs

11 091101

ST4.0 x 10mm Pan Head Screw

7 pcs

12 092102

ST4.2 x 16mm Countersunk Screw (pre-attached to #03)

4 pcs

12 092102

ST4.2 x 16mm Countersunk Screw

2 pcs

13

07551011 / 07554011 / 07556011

Decorative Cover and Washer

7 pcs

14 07550045

Wall Anchor 8mm (5/16in)

11 pcs

15 060007060-1800

Vinyl Insert for Glass Profile

1 pc

16

07551014 / 07554014 / 07556014

Glass Clip for 6mm (1/4in) Glass

2 pcs

17a 07341008 / 07344008 / 07346008

Single Roller Assembly (top) for 6mm (1/4in) Glass

2 pcs

17b 07341009 / 07344009 / 07346009

Single Roller Assembly (bottom) for 6mm (1/4in) Glass

2 pcs

18 07221024 / 07224024 / 07226024

Towel Bar Assembly for 6mm (1/4in) Glass

1 pc

--- 07550009

Roller Stopper (pre-attached to #03)

4 pcs

INFINITY-Z 48x72 Frosted Glass

28

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

®

Product Parts Information

Contact [email protected] for Part replacement, installation assistance or addtional information

Complete Warranty information is available on DreamLine.com

FACTORY PARTS INFORMATION

ITEM

#

FACTORY PART NUMBER ITEM DESCRIPTION QTY

01 04002011-1830 / 04002041-1830 / 04002061-1830

Left or Right Glass Profile for 6mm (1/4in) Glass

2 pcs

02 04183011-1830 / 04183041-1830 / 04183061-1830

Left or Right Wall Profile

2 pcs

03 04001011-1283 / 04004011-1283 / 04006011-1283

Top or Bottom Guide Rail

2 pcs

04 010022011

Door Glass

1 pc

05 010022010

Inline Panel Glass

1 pc

06 07221006 / 07224006 / 07226006

Single Sided Curved Handle with Knob for 6mm (1/4in) Glass

1 pc

07a 063001060-1743

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for panel)

1 pc

07b 063001060-1814

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for door)

2 pcs

08 060001000-1765

Push-in Glazing Vinyl for 6mm (1/4in) Glass

1 pc

09 091131

ST4.0 × 55mm Pan Head Screw

11 pcs

10 091104

ST4.0 x 25mm Pan Head Screw

11 pcs

11 091101

ST4.0 x 10mm Pan Head Screw

7 pcs

12 092102

ST4.2 x 16mm Countersunk Screw (pre-attached to #03)

4 pcs

12 092102

ST4.2 x 16mm Countersunk Screw

2 pcs

13

07551011 / 07554011 / 07556011

Decorative Cover and Washer

7 pcs

14 07550045

Wall Anchor 8mm (5/16in)

11 pcs

15 060007060-1800

Vinyl Insert for Glass Profile

1 pc

16

07551014 / 07554014 / 07556014

Glass Clip for 6mm (1/4in) Glass

2 pcs

17a 07341008 / 07344008 / 07346008

Single Roller Assembly (top) for 6mm (1/4in) Glass

2 pcs

17b 07341009 / 07344009 / 07346009

Single Roller Assembly (bottom) for 6mm (1/4in) Glass

2 pcs

18 07221051 / 07224051 / 07226051

Towel Bar Assembly for 6mm (1/4in) Glass

1 pc

--- 07550009

Roller Stopper (pre-attached to #03)

4 pcs

INFINITY-Z 54x72 Clear Glass

29

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

BOLD digit indicates finish: 1 = Chrome; 4 = Brushed Nickel; 06 = Oil Rubbed Bronze

®

Product Parts Information

Contact [email protected] for Part replacement, installation assistance or addtional information

Complete Warranty information is available on DreamLine.com

FACTORY PARTS INFORMATION

ITEM

#

FACTORY PART NUMBER ITEM DESCRIPTION QTY

01

04002011-1830 / 04002041-1830 / 04002061-1830

Left or Right Glass Profile for 6mm (1/4in) Glass

2 pcs

02

04183011-1830 / 04183041-1830 / 04183061-1830

Left or Right Wall Profile

2 pcs

03

04001011-1283 / 04004011-1283 / 04006011-1283

Top or Bottom Guide Rail

2 pcs

04 010022013

Door Glass

1 pc

05 010022012

Inline Panel Glass

1 pc

06

07221006 / 07224006 / 07226006

Single Sided Curved Handle with Knob for 6mm (1/4in) Glass

1 pc

07a 063001060-1743

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for panel)

1 pc

07b 063001060-1814

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for door)

2 pcs

08 060001000-1765

Push-in Glazing Vinyl for 6mm (1/4in) Glass

1 pc

09 091131

ST4.0 × 55mm Pan Head Screw

11 pcs

10 091104

ST4.0 x 25mm Pan Head Screw

11 pcs

11 091101

ST4.0 x 10mm Pan Head Screw

7 pcs

12 092102

ST4.2 x 16mm Countersunk Screw (pre-

attached to #03)

4 pcs

12 092102

ST4.2 x 16mm Countersunk Screw

2 pcs

13

07551011 / 07554011 / 07556011

Decorative Cover and Washer

7 pcs

14 07550045

Wall Anchor 8mm (5/16in)

11 pcs

15 060007060-1800

Vinyl Insert for Glass Profile

1 pc

16

07551014 / 07554014 / 07556014

Glass Clip for 6mm (1/4in) Glass

2 pcs

17a

07341008 / 07344008 / 07346008

Single Roller Assembly (top) for 6mm (1/4in) Glass

2 pcs

17b

07341009 / 07344009 / 07346009

Single Roller Assembly (bottom) for 6mm (1/4in) Glass

2 pcs

18

07221051 / 07224051 / 07226051

Towel Bar Assembly for 6mm (1/4in) Glass

1 pc

--- 07550009

Roller Stopper (pre-attached to #03)

4 pcs

INFINITY-Z 54x72 Frosted Glass

30

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

BOLD digit indicates finish: 1 = Chrome; 4 = Brushed Nickel; 06 = Oil Rubbed Bronze

®

Product Parts Information

Contact [email protected] for Part replacement, installation assistance or addtional information

Complete Warranty information is available on DreamLine.com

FACTORY PARTS INFORMATION

ITEM

#

FACTORY PART NUMBER ITEM DESCRIPTION QTY

01

04002011-1830 / 04002041-1830 / 04002061-1830

Left or Right Glass Profile for 6mm (1/4in) Glass

2 pcs

02

04183011-1830 / 04183041-1830 / 04183061-1830

Left or Right Wall Profile

2 pcs

03

04001011-1437 / 04004011-1437 / 04006011-1437

Top or Bottom Guide Rail

2 pcs

04 010021010

Door Glass

1 pc

05 010022004

Inline Panel Glass

1 pc

06

07221006 / 07224006 / 07226006

Single Sided Curved Handle with Knob for 6mm (1/4in) Glass

1 pc

07a 063001060-1743

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for panel)

1 pc

07b 063001060-1814

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for door)

2 pcs

08 060001000-1765

Push-in Glazing Vinyl for 6mm (1/4in) Glass

1 pc

09 091131

ST4.0 × 55mm Pan Head Screw

11 pcs

10 091104

ST4.0 x 25mm Pan Head Screw

11 pcs

11 091101

ST4.0 x 10mm Pan Head Screw

7 pcs

12 092102

ST4.2 x 16mm Countersunk Screw (pre-

attached to #03)

4 pcs

12 092102

ST4.2 x 16mm Countersunk Screw

2 pcs

13

07551011 / 07554011 / 07556011

Decorative Cover and Washer

7 pcs

14 07550045

Wall Anchor 8mm (5/16in)

11 pcs

15 060007060-1800

Vinyl Insert for Glass Profile

1 pc

16

07551014 / 07554014 / 07556014

Glass Clip for 6mm (1/4in) Glass

2 pcs

17a

07341008 / 07344008 / 07346008

Single Roller Assembly (top) for 6mm (1/4in) Glass

2 pcs

17b

07341009 / 07344009 / 07346009

Single Roller Assembly (bottom) for 6mm (1/4in) Glass

2 pcs

18

07221023 / 07224023 / 07226023

Towel Bar Assembly for 6mm (1/4in) Glass

1 pc

--- 07550009

Roller Stopper (pre-attached to #03)

4 pcs

INFINITY-Z 60x72 Clear Glass

31

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

BOLD digit indicates finish: 1 = Chrome; 4 = Brushed Nickel; 06 = Oil Rubbed Bronze

®

Product Parts Information

Contact [email protected] for Part replacement, installation assistance or addtional information

Complete Warranty information is available on DreamLine.com

FACTORY PARTS INFORMATION

ITEM

#

FACTORY PART NUMBER ITEM DESCRIPTION QTY

01

04002011-1830 / 04002041-1830 / 04002061-1830

Left or Right Glass Profile for 6mm (1/4in) Glass

2 pcs

02

04183011-1830 / 04183041-1830 / 04183061-1830

Left or Right Wall Profile

2 pcs

03

04001011-1437 / 04004011-1437 / 04006011-1437

Top or Bottom Guide Rail

2 pcs

04 010021011

Door Glass

1 pc

05 010022005

Inline Panel Glass

1 pc

06

07221006 / 07224006 / 07226006

Single Sided Curved Handle with Knob for 6mm (1/4in) Glass

1 pc

07a 063001060-1743

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for panel)

1 pc

07b 063001060-1814

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for door)

2 pcs

08 060001000-1765

Push-in Glazing Vinyl for 6mm (1/4in) Glass

1 pc

09 091131

ST4.0 × 55mm Pan Head Screw

11 pcs

10 091104

ST4.0 x 25mm Pan Head Screw

11 pcs

11 091101

ST4.0 x 10mm Pan Head Screw

7 pcs

12 092102

ST4.2 x 16mm Countersunk Screw (pre-

attached to #03)

4 pcs

12 092102

ST4.2 x 16mm Countersunk Screw

2 pcs

13

07551011 / 07554011 / 07556011

Decorative Cover and Washer

7 pcs

14 07550045

Wall Anchor 8mm (5/16in)

11 pcs

15 060007060-1800

Vinyl Insert for Glass Profile

1 pc

16

07551014 / 07554014 / 07556014

Glass Clip for 6mm (1/4in) Glass

2 pcs

17a

07341008 / 07344008 / 07346008

Single Roller Assembly (top) for 6mm (1/4in) Glass

2 pcs

17b

07341009 / 07344009 / 07346009

Single Roller Assembly (bottom) for 6mm (1/4in) Glass

2 pcs

18

07221023 / 07224023 / 07226023

Towel Bar Assembly for 6mm (1/4in) Glass

1 pc

--- 07550009

Roller Stopper (pre-attached to #03)

4 pcs

INFINITY-Z 60x72 Frosted Glass

32INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

BOLD digit indicates finish: 1 = Chrome; 4 = Brushed Nickel; 06 = Oil Rubbed Bronze

®

Product Parts Information

Contact [email protected] for Part replacement, installation assistance or addtional information

Complete Warranty information is available on DreamLine.com

FACTORY PARTS INFORMATION

ITEM

#

FACTORY PART NUMBER ITEM DESCRIPTION QTY

01

04002011-1474 / 04002041-1474 / 04002061-1474

Left or Right Glass Profile for 6mm (1/4in) Glass

2 pcs

02

04183011-1474 / 04183041-1474

Left or Right Wall Profile

2 pcs

03

04001011-1437 / 04004011-1437 / 04006011-1437

Top or Bottom Guide Rail

2 pcs

04 010021007

Door Glass

1 pc

05 010022001

Inline Panel Glass

1 pc

06

07221006 / 07224006

Single Sided Curved Handle with Knob for 6mm (1/4in) Glass

1 pc

07a 063001060-1387

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for panel)

1 pc

07b 063001060-1458

Vinyl Seal with a Flexible Fin for 6mm (1/4in) Glass (for door)

2 pcs

08 060001000-1410

Push-in Glazing Vinyl for 6mm (1/4in) Glass

1 pc

09 091131

ST4.0 × 55mm Pan Head Screw

11 pcs

10 091104

ST4.0 x 25mm Pan Head Screw

11 pcs

11 091101

ST4.0 x 10mm Pan Head Screw

7 pcs

12 092102

ST4.2 x 16mm Countersunk Screw (pre-

attached to #03)

4 pcs

12 092102

ST4.2 x 16mm Countersunk Screw

2 pcs

13

07551011 / 07554011

Decorative Cover and Washer

7 pcs

14 07550045

Wall Anchor 8mm (5/16in)

11 pcs

15 060007060-1411

Vinyl Insert for Glass Profile

1 pc

16

07551014 / 07554014

Glass Clip for 6mm (1/4in) Glass

2 pcs

17a

07341008 / 07344008

Single Roller Assembly (top) for 6mm (1/4in) Glass

2 pcs

17b

07341009 / 07344009

Single Roller Assembly (bottom) for 6mm (1/4in) Glass

2 pcs

18

07221023 / 07224023

Towel Bar Assembly for 6mm (1/4in) Glass

1 pc

--- 07550009

Roller Stopper (pre-attached to #03)

4 pcs

INFINITY-Z 60x58 Clear Glass

33INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 2 012020

BOLD digit indicates finish: 1 = Chrome; 4 = Brushed Nickel; 06 = Oil Rubbed Bronze

®

TEL: 866-731-2244

FAX: 866-857-3638

DREAMLINE.COM

For more information on DreamLine

®

Shower Doors and Enclosures please visit DreamLine.com