POINT BREAK CLEANER

FEATURES

SUITABLE SURFACES

WWW.TRIDENTPROTECTS.COM 866-951-4293

TECHNICAL DATA SHEET

Powerful Organic Spot Cleaner

 Dislodges and cleans common non-greasy stains

 Concrete & Clay Pavers

 Natural & Manufactured Stone

 Traverne

 Flat Concrete

 Segmental Retaining Wall Blocks

 Concrete Walls

 Exposed Aggregate

 Not for use on asphalt

*Use cauon on sensive surfaces such as

wet cast pavers and stamped concrete.

May cause damage to color of surface.

Point Break | Page 1 | TDS 240 | Revised Date: 5.13.2020

POINT BREAK

CLEANER

TDS 240

Damage Free, Spot Cleaning

 Eciently cleans moss, mold, mildew, leaf stains

 Tough on rust, wine and non-greasy food stains

 Does not damage or etch surfaces with proper diluon

Flexi-Dilute

 Customize strength of diluon to match stains

Fast Acng

 Aacks stains in minutes

Clean Rinse Technology

 Easily rinse away dirt and cleaner residue with a low or high pressure washer

Biodegradable

 Cleaner residue breaks down quickly in soil

Concentrated Formula

 Dilute to meet cleaning needs

Coverage based on single treatment. Some applicaons may require addional treatments. Coverage rate may vary depending

on the surface porosity, texture, severity of staining, applicaon method and other local condions.

COVERAGE PER GALLON OF DILUTED PRODUCT

APPLICATION SQ FEET SQ METERS

All Surfaces 100 - 250 9.3 - 23.2

PURPOSE

PERFORM A TEST IN A SMALL AREA TO VERIFY SUITABILITY, DILUTION RATE AND DWELL TIME OF THIS PRODUCT FOR YOUR STAIN.

SURFACE PREPARATION/PRE-TESTING

 Remove all loose soil and debris from surface.

 Cover/protect adjacent and surrounding surfaces not intended to be cleaned.

 TEST FIRST: Before using Point Break, test on a small, inconspicuous area to determine the suitability, correct diluon and dwell

me needed for your surface. Allow test area to dry thoroughly before evaluang nal appearance and results.

ADVANCED ORGANIC STAIN REMOVER

DILUTION INSTRUCTIONS

Dilute with water prior to use. Amount of diluon is dependent on severity of staining and if surface has been previously sealed.

Only use strength of diluon needed to suciently clean. Under diluon (too strong) may cause damage to the substrate.

 Pour desired amount (see chart) of Point Break into an empty, clean 1 quart or 1 gallon container.

 Fill the balance of the container with water and mix.

DILUTION CHART

APPLICATION CONDITIONS

 Clean when air and surface temperatures are 40°F or above. If freezing condions exist, allow me for surface to thaw.

 If air temperature exceeds 90°F, ash cool the surface with water before applying product.

 Do not allow product to dry on a hot surface.

 Always rinse thoroughly while cleaner is sll wet on surface.

APPLICATION TOOLS

 Low pressure sprayer such as a pump-up garden sprayer or spray bole

 Clean s bristle brush or broom

 Hot water pressure washer preferred. As an alternave, cold water pressure washer or garden hose can be used.

APPLICATION INSTRUCTIONS

Point Break is designed for one applicaon cleaning. Stronger concentraons and addional cleanings may be needed to remove

heavier, deep set stains.

 Apply diluon of Point Break using a low pressure sprayer.

 Let dwell for 5 to 10 minutes.

 Improve results by scrubbing surface with a brush to agitate and break down stains.

 For brushless cleaning, apply Point Break on the surface using two applicaons back to back. The rst applicaon is to penetrate

and the second is to li the stain out.

 Rinse surface thoroughly. For best results, use a hot water pressure washer with a 25° to 40° fan p to draw out and further

break down surface stains. A cold water pressure washer or a garden hose with nozzle may be used as a substute. Only use as

much pressure needed to thoroughly clean as excessive high pressures can damage substrates.

 Let surface dry. Inspect stains to determine if addional spot cleaning is needed.

 Clean the enre surface with Trident’s Wipe Out or White Water surface cleaners following manufacturer’s instrucons.

 Before installing joint sand or sealing, allow surface to dry.

TECHNICAL DATA SHEET

POINT BREAK

Point Break | Page 2 | TDS 240 | Revised Date: 5.13.2020

WWW.TRIDENTPROTECTS.COM 866-951-4293

Diluon Rao

(Water : Point Break)

Point Break for 1

ready to use quart

Point Break for 1

ready to use gallon

Strength/Applicaon

3:1 8 oz. 32 oz. Maximum for dicult stains

15:1 2 oz. 8 oz. Moderate for common stains

30:1 1 oz. 4 oz. Minimum for light stains and cleaning on sealed surfaces

TECHNICAL DATA SHEET 100

CLEAN UP

Rinse all tools and overspray thoroughly with water before product dries.

STORAGE

 Store locked up in a cool, well-venlated place

 Do not allow to freeze

DISPOSAL

Dispose of contents and container to appropriate waste site or reclaimer in accordance with all applicable laws, regulaons, and

product characteriscs at me of disposal.

SHELF LIFE

2 years when unopened and properly stored

POINT BREAK

TECHNICAL DATA SHEET

Point Break | Page 3 | TDS 240 | Revised Date: 5.13.2020

WARRANTY

Trident warrants its products to substanally conform to its published specicaons at the me of purchase. The foregoing is the

sole limited warranty applicable to the products. Trident HEREBY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND OR NATURE,

WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY OTHER WARRANTY OTHER THAN THE WARRANTY SET FORTH ABOVE.

The user is solely responsible for determining suitability of the products for their parcular use. While the actual applicaon of

this product is out of the control of Trident, it is recommended that the applicaon guidelines be followed completely and

accurately. Trident’s liability for any damage shall not exceed the purchase price of the product used, and it shall have no liability

for consequenal, incidental or punive damages.

 KEEP OUT OF REACH OF CHILDREN

 Read label before use

 Use only outdoors in a well venlated area

 Keep container ghtly closed when not in use

 Avoid breathing vapors, spray or mist

 Do not get in eyes, on skin or on clothing

 Wash thoroughly aer handling

 Do not eat, drink or smoke when using this product

 Wear protecve gloves, clothing, face and eye protecon

 Avoid release to the environment

PRECAUTIONARY INFORMATION

EMERGENCY & FIRST AID MEASURES

 Get medical aenon if exposed and you feel unwell, or are concerned.

 IF INHALED: Remove vicm to fresh air and keep at rest in a posion comfortable for breathing.

 IF SWALLOWED: Rinse mouth. Do NOT induce voming. Call a POISON CENTER or physician if feel unwell.

 IF ON SKIN (or hair): Take o all contaminated clothing and wash before reuse. Wash with plenty of water or shower. If skin

irritaon occurs: Get medical advice/aenon.

 IF IN EYES: Rinse cauously with water for several minutes. Remove contact lenses, if present and easy to do. Connue rinsing.

If eye irritaon occurs: Get medical aenon.

 IN CASE OF FIRE: Use water, water fog, dry chemical, CO

or alcohol resistant foam to exnguish.

See Safety Data Sheet for complete informaon.

1 Gallon Containers - 4 Per Case

5 Gallon Pails

55 Gallon Drums

PACKAGING

3925 Stern Avenue | St. Charles, IL 60174

866-951-4293 | www.tridentprotects.com